Table of Contents
Can you replace the handles on a dresser?
There are two main ways for changing the hardware on a dresser. You can update the old dresser hardware with new knobs. You can paint the old dresser hardware.
What are the handles on dressers called?
A drawer pull (wire pull or simply pull) is a handle to pull a drawer out of a chest of drawers, cabinet or other furniture piece.
What can I use instead of drawer pulls?
Plastic toys from the dollar store or thrift shop are great pieces to start with. The plastic is softer and very forgiving if you end up needing to take a few tries to get the hole drilled out. They are somewhat large for your basic door knob or drawer pull, but could work on the right piece.
How do you put new handles on dresser drawers?
How To Replace Old Furniture Hardware With New Drawer Pulls Prepare the furniture for painting. Remove the original hardware. Drill a hole for the new hardware. Protect the inside of the drawer. Fill old hardware screw holes with wood filler. Sand the wood filler. Paint the furniture.
What is the hardware on cabinets called?
Cabinet and Drawer Hardware Cabinet hardware includes all the parts you need to make your cabinets functional, from the knobs you use to open them to catches that hold them shut. Drawer hardware also includes pieces like slides that let you open and close the drawers.
What is a bail pull?
Bail Pull. A drawer pull with a bail handle which swings from the two posts.
What is a cabinet pull?
What is a Pull? Pulls are small fixtures attached to drawers’ front faces to allow them to be pulled open. To make installation simple, cabinet drawers and doors are often made with a precut hole to help assist with consistent placement.
Can you use knobs on drawers?
There are no strict rules to follow when choosing whether to select a knob or a pull or both. One preference is to use knobs for all doors and pulls for all drawers. It is much more comfortable to open a drawer using a pull. This allows the whole hand to grab instead of only your fingertips.
How do you refurbish old drawer pulls?
How to use the baking soda method Boil some water in a small pot. Once the water is boiling, sprinkle in some baking soda. Use metal tongs to dip your drawer pulls into the bubbly baking soda water. Hold the drawer pulls in the water for a minute or so and watch the rust and dirt float away (so satisfying!).
How do you refinish old drawer pulls?
Clean the pulls with warm soapy water or mineral spirits and use a wire brush to remove loose paint. Allow them to dry thoroughly before continuing. Spray paint for metal handles will adhere better if you scuff the surface of the pull with sandpaper. Use a tack cloth or brush to remove dust after sanding.
Can I paint dresser handles?
Painting drawer hardware is really easy to do and can make-or-break the overall appearance of your furniture. This works okay, but the paint often pools around the handles. You also have to move the hardware around to get coverage on the back and sides. This is messy and can leave fingerprints and flaws in your finish.
What is considered kitchen hardware?
The kitchen hardware holds significant weight towards shaping the design of the room. From brass door knobs to chrome cabinet handles, elegant kitchen hardware polishes the room with subtle details. We have an extensive collection of kitchen door knobs, cabinets pulls, decorative handles and more.
What is an overlay hinge?
Overlay cabinet hinges mean that they allow the cabinet door to “lay over” the frame of the cabinet. If your current doors are larger than the frames — eg. they don’t settle into the frame when closed — then you likely have overlay hinges already (hidden or semi concealed).
What are the different types of drawer slides?
There are 6 types of Drawer slides: Ball Bearing Drawer Slides. Soft close Ball Bearing Drawer Slides. Under mount Drawer Slides. Side Mount Drawer Slides. Center Mount Drawer slides. Roller Slides.
How is bail pull measured?
To measure drawer pulls, you must determine three measurements: length, center-to-center distance, and projection/depth. With knobs, focus on projection/depth measurements, since most knobs will not be particularly tall or wide.
What is an appliance pull?
Appliance pulls are long kitchen cabinet handles generally used in two places in the kitchen. The first is on wood panel covered appliances, usually refrigerators or dishwashers. The other popular use for appliance pulls is for tall pantry doors or oversized storage drawers.
What is the standard size cabinet pull?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
How do you make leather pulls?
How to make DIY leather handles and drawer pulls Step 1: cut your leather. Cut off the bottom and top edges of your leather to remove the rounded corners. Step 2: glue your leather. STEP 3: cut to the right length. Step 4: add screw posts. Step 5: install your handles.
Do knobs go on drawers or cabinets?
Knobs can be placed on both cabinetry doors + drawers. Mounted on the door stile, cabinetry knobs are placed on the opposite side of the door hinge + typically 2-½” to 3” from the bottom corner of the door for upper cabinets. While on base cabinets knobs are usually placed 2-½” to 3” from the upper corner of the door.
Do knobs go on doors or drawers?
1: In traditional spaces, the general rule to follow is knobs on doors and pulls on drawers. Sometimes we’ll break this rule for small drawers or small spaces, like bathrooms! From our Sunset House.
