Table of Contents
How to Remove a Rolltop Clean off the surface of your desk, both inside the roll top and on the very top of the desk. Cut a vertical strip of material from the middle of the roll top using the panel saw. Break up the remaining strips of of wood, including the thickest strip at end, from the top of the roll top.
How do you remove a tambour roll top desk?
Open the roll-top portion of the desk, looking inside for straps or screws which hold the top onto the rest of the desk. Remove the screws with a slotted screwdriver. Lift the roll-top portion of the desk and slide out the tambour, or slatted door, setting it cloth-side up on top of the replacement cloth.
What is the roll top part of a desk called?
The rolling part of a roll top desk is called a tambour, a section of an antique desk made of thin slats that are flat on one side and often rounded on the other side for a textured look.
Can you take the top off of a roll top desk?
Cut a vertical strip of material from the middle of the roll top using the panel saw. Cut from bottom to top, stopping about 2 inches shy of the top lip of the desk to saw across and remove the strip. Break up the remaining strips of of wood, including the thickest strip at end, from the top of the roll top.
How do you remove a tambour door?
The suggestion was: use a dremel tool to cut out about 1″ of the inside track, top and bottom, near where the track intercepts the box/spiral. Then pull out the tambour, through the cut, rolling it up as you go, to remove it.
What kind of glue do you use to repair a roll top desk?
All that you’ll need to fix the desk is some heavy duty fabric and glue (I used wood glue, but I’m sure craft glue would work as well). Cut the fabric to be about four inches less than the width of your roll top and just slightly less than the length.
What are the different parts of a desk called?
Parts of a Desk Explained (Diagram Included) Top. Return. Sliding Keyboard Tray. Drawers and Shelves. CPU Storage Shelf. Hutch. Credenza.
What are the parts of a table called?
Parts of a Table top – the flat surface of a table. apron, skirt or frieze – the under-framing which connects the legs to the top. leg – the main vertical piece which supports the top and raises it off the floor. knee – the upper portion of the leg. foot – the bottom part of the leg which touches the floor.
What is a roll top table?
The legs unscrew and the table-top rolls up and stores in its own canvas tote sack. Perfect for camping, RV, boating, or in the backyard.
Can a roll top desk be painted?
Apply a light coat of primer to the desk, using a medium paint brush and working from the top down. Keep the roll top in its hidden position so you can paint the desk’s inside and the bottom piece of the roll top. Apply primer to the drawer fronts, moving the brush from side to side. Allow the primer to dry.
How do you refinish an oak roll top desk?
How to Restore an Oak Roll Top Desk Apply a heavy coat of chemical stripper onto the oak roll top desk with a brush. Scrape the old finish off with the putty knife and steel wool. Sand the desk with 120 grit sandpaper. Wipe grain filler onto the oak roll-top desk with a cloth and work it into the wood.
How heavy is a roll top desk?
Technical Details Item Weight 338 pounds Product Dimensions 57 x 25.5 x 25 inches Weight 338 Pounds.
Are roll top desks in style?
Like many pieces of furniture, the roll top has waxed and waned in popularity. Now we find we are using less paper due to the computer age and the desk is gaining in popularity.
How do roll top desks work?
The rolltop desk is simply a “pedestal desk”–a top set on two columns of drawers–with a top case added. All rolltop desks have a three-sided cabinet that has tracks routed along the top and front edges of each side, lined with metal or plastic so that the roll part, or “tambour,” will slide easily.
How do you fix slats on a roll top desk?
Brush glue over the lift bar and wrap the end of the tambour cloth around it. Nail and clamp the cloth in place. Then apply a thin layer of glue over the lift bar and the slats using a foam brush, or by squirting lines of glue randomly over the bar and slats, rolling it smooth with a paint roller.
How do I install tambour panels?
Cut all panels prior to installation and “dry fit” to ensure proper fit. Apply a ¼” bead within ½” of all edges of panel and continuous bead across the panel every 4”. Apply panel to wall, pull loose and reapply. Press and knead repeatedly to insure contact.
How do you lubricate a tambour door?
Paste wax is the normal recommendation for lubricating sticky drawers and tambours with carnauba being the hardest and most durable. Avoid spray lubricants.
What is the flat part of a desk called?
Flat Top Surface Almost every desk has a flat-top surface. The sole purpose of having this flat surface in the desk is to provide a smooth space for writing.
What are shelves on desks called?
The credenza desk is sometimes flat, like a pedestal desk, but more often than not it has a stack of shelves, small drawers and other nooks above its main working surface. The sum of these overhead amenities is usually called a hutch. Hence, the credenza desk is often called a “credenza with hutch”.
What is a shelf on a desk called?
Anatomy of a desk Hutch (above): While not indicated on the diagram above, it’s the shelf unit sitting on top of the desk. These are a great addition because of the storage they offer. Keyboard tray / sliding hutch (below): Most computer desks also come with a keyboard tray.
