Table of Contents
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
How do I know if my toilet is 10 or 12?
If your toilet has four bolts rather than the standard two, you’ll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
What size toilet do I have?
Measure from the wall behind the toilet to the center of one of the closet bolts (which hold the toilet down). If the toilet has four closet bolts, measure to the center of one of the rear ones. Then measure from the center of the mounting holes to the back of the new toilet you’re considering.
Can you replace a 10-inch rough-in toilet with a 12-inch?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
Is 1.6 or 1.28 toilet better?
A 1.28 GPF toilet uses 1.28 gallons of water per flush while a 1.6 GPF toilet uses 1.6 gallons per flush. 1.28 GPF toilets are therefore more water efficient than 1.6 GPF toilets but none is necessarily better at flushing than the other.
What is better round or elongated toilet?
Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.
Do all toilets fit the same?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
How do you measure a 10 inch or 12-inch rough-in for a toilet?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
How do I know the rough-in size of my toilet?
The rough-in measurement of a toilet refers to the span between the wall behind the toilet and the center of the waste pipe. To measure the rough-in for your toilet, measure from the wall behind the toilet to the middle of the bolt caps (the caps holding your toilet to the floor).
Can you replace a 14-inch rough-in toilet with a 12-inch rough-in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
Can you use a 12 inch rough in toilet?
12 Inch Rough In Toilet A 12 inch rough in is the most common measurement in bathrooms. This size allows for the most variety in the shape of the bowl and style of the toilet you purchase. Even though this is the most standard measurement, don’t forgo measuring (at least twice) before buying a new toilet.
Can you move a toilet over a few inches?
Yes, you can actually move a toilet. Even moving a toilet by a few inches without having to make a new hole in the floor is possible. You can use an offset toilet flange to move the toilet by a couple of inches on any side. This will allow you to use the same wastewater line and in turn help to save you a lot of money.
Why would I want an elongated toilet bowl?
Elongated bowls are also considered more ‘hygienic’ in that the larger surface area of the bowl makes is easier for men and children to use with less mess. The longer bowl size is also a requirement for ADA use, and the longer/wider bowl is generally easier to use for those with mobility issues.
What is the best flush rate for a toilet?
A rating of 350 to 600 grams for a 1.6-gallon flush is good, although some toilets can handle up to 1,000 grams (2.2 pounds!) using only 1.28 gpf. To find a toilet’s MaP score, go to MaP Testing.
Does toilet tank size matter?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.
Does gallons per flush matter?
It’s A Matter of Volume A 1.6 GPF toilet uses substantially more water each time you flush the toilet. Not only is that hurting your water bill over time, but it’s also a waste of precious natural resources. A 1.6 GPF toilet is noticeably louder when it flushes than a 1.28 GPF toilet.
Which toilet shape is most comfortable?
Elongated toilets, and toilet seats, are thought to be more comfortable than round shaped. They more closely fit the shape of a persons bottom when sitting and allow enough room, in front and in back, for all toilet based activities. Choosing elongated vs round really comes down to the shape of the toilet itself.
Are elongated toilets more comfortable?
The major difference between an elongated and a round toilet is the length and shape of the toilet bowl. Elongated toilets are more comfortable than round toilets while round toilets are more space efficient than elongated toilets.
What toilet is best?
8 Best Toilets for the Home in 2021 Best Overall Toilet: Kohler Corbelle K-3814-0. Best Toilet for Modern Spaces: Swiss Madison Well Made Forever One Piece Toilet. Best Two-Piece Toilet: TOTO Promenade 2-Piece Toilet. Best Value One-Piece Toilet: Glacier Bay 1-piece Dual Flush Toilet.
