Table of Contents
To avoid using studs, screws or making holes in the wall to hold down a hook or bracket, go for adhesive tapes. You can use these to hang any hollow and lightweight bookshelf, particularly the ones that are made of wood. As a general rule, only hang bookshelves that weigh no more than 4 kilograms.
Do I really need to anchor my bookshelf?
Bookcases, dressers, armoires and cabinets are all worthwhile candidates for anchoring — so is any piece of furniture holding a TV. Consider, too, whether a piece of furniture has drawers, shelves or doors.
How do you secure a freestanding bookcase?
Place silly putty, velcro, or surfboard wax under breakables, to keep them from falling off shelves. Add a thin strip of wood as an additional barrier.
How do you stabilize a free standing bookshelf?
Drill a hole for each foot in the underside of one of the legs and tap in the foot, using a hammer. Right the bookshelf and put it back into position. Raise or lower each foot until the bookcase stops wobbling. Raise the feet by turning them clockwise; lower them by turning them counterclockwise.
Do I need to fasten bookshelf to wall?
Unlike smaller pieces of furniture, bookcases are usually filled with heavy objects and pose a safety risk if they fall. Attaching them to a wall is the best way to avoid accidents.
Will my bookshelf fall over?
Furniture will sometimes tip over because it is top-heavy. Try to keep heavier items on the lower half of your bookshelf to help stabilize the bookshelf at the bottom.
How do you keep a bookshelf from falling down?
Fasten a furniture strap to the wall and the bookcase to keep it from tipping over. The straps cost about $6 at Target and hardware stores. Or, fasten the bookcase to the wall by driving 3-in. screws through the back of the bookcase (at obscure locations) into studs (be sure you hit studs).
How do you support a leaning bookshelf?
If your bookcase is leaning because it has a leg that is too short, Wobble Wedge® plastic shims are great for fixing this problem too. Soft plastic Wobble Wedge® shims will protect delicate wooden bookshelves from dents while allowing you to level the shelf on hard flooring, like wood or tile.
How do you brace a bookcase?
Stand a level on the side of the bookcase. If the level shows that the bookcase is leaning to one side, tap on the side of the bookcase with a rubber mallet until the bookcase is level. If it won’t stay in place, tighten the screws slightly and tap on the case until it stays level.
How do you reinforce a bookcase?
For an existing bookcase, you can strengthen the shelves either by adding small panels to the interior sides of the bookcase to serve as dadoes or by securing narrow strips of wood, called cleats, below each shelving board.
Does Ikea furniture have to be fixed to the wall?
Furniture must be securely attached to the wall. Use the tip-over restraint provided with the product and the right hardware for your wall type. Consult our wall anchoring guide for help. Never put a TV or other heavy objects on top of a chest of drawers or any furniture not intended for use with a TV.
How do you anchor a bookshelf to the wall?
Measure on Top of the Bookshelf Measure on Top of the Bookshelf. Place the bookshelf against the wall. Apply Double-Sided Mounting Tape. Apply a piece of double-sided mounting tape to the top of the bookshelf where you made the pencil marks. Connect the Velcro Fastener.
Will Billy bookcase tip over?
The Billy bookcases have a high likelihood of tipping because they’re so tall but also so slender. With glass doors, it’s guaranteed to tip, especially when you’re pulling open the doors. The little L shaped brackets that come with the hardware will be enough to hold it in place.
How do you balance a bookshelf?
If you plan to put more on your bookshelf than books, choose which shelves will hold your books. For a balanced look, avoid placing all books on the left side or the right side. Instead, space books throughout your bookcase, occasionally filling only half a shelf or skipping a shelf entirely.
How do you brace shelves?
L-Brackets Remove all the items from the shelf before beginning any work. Locate the studs behind your shelf with a stud finder. Slide the shelf back into position. Attach the bracket to the wall with screws provided with the bracket. Add another bracket if there is another stud that sits behind the shelf.
How do you brace long shelves?
Making supports is easy, you just need to cut strips and glue or screw them in place. The best strips will run perpendicular to the shelf itself. Make these a couple inches tall, and have them run the entire width of the shelf. Two of these, placed it in thirds can add significant strength to a long wooden shelf.
How do you secure a bookcase to the ceiling?
To lock the bookcases into position, screw the top to the ceiling joists with 3-in. drywall screws, making sure the backs of the standards are against the wall. Use at least six screws to secure the top directly to the joists (two screws at each location). You can now remove the temporary stringers.
How do I stabilize my IKEA bookshelf?
To correct and strengthen your BILLY, all you need is a few more nails (consider using double the nails as suggested in the original instructions) and some wood glue. Place the flimsy backing piece back on your bookcase as directed, but use more nails hammered more closely together.
How do you fix a leaning shelf?
Clear out the floating shelf and push it upwards to a straight level that it should be. Keep this level maintained. Now, stack the shims/wedges together and below the shelf, push the stacked shims upwards behind the shelf. If the shelf is still loose, add more shims till it becomes tight enough to hold.
How do you repair a bowing bookcase?
Take everything off the bowing shelves. Remove the shelves from the bookcase. They may be screwed in, nailed in, glued in or laying on top of pegs. Flip over the shelves and put them back in the bookcase. This places the bow so that it now bows up. Put everything back on the shelves.
