Table of Contents
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
How much gravel do I need for a fence post hole?
You should put approximately 2″ to 4″ of gravel in the bottom of the hole making sure that the Post stands 6′ 4″ tall from the ground to the top of the post. How wide should the holes be? An 8″ diameter wide hole should be dug for the posts to be inserted for a solid Fence.
How many bags of quikrete do I need for a 4×4 fence post?
It’s right for a 4×4 fence post to have 1 bag per hole. The depth of the post hole should be half of the post height. For a 6′ above ground post, place 3 feet in the ground and use a post with an overall height of 9 feet.
How many concrete bags do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.
Should I put gravel under my fence post?
DO Employ a Base Gravel Layer If a fence post fails without any sign of a pest infestation, it’s likely that the failure was caused by moisture that rotted the wood over time. Once you have added gravel to a depth of three inches or so, use a piece of scrap lumber to tamp down the layer.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
How deep should a 6 foot fence post be in the ground?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet). Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.
How big of a hole do you need for a 4×4 post?
The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.
How deep should I bury a 20 foot post?
The general rule of thumb when setting a post is that the depth of the post’s hole needs to be one-third to one-half of the actual above-ground height of the post.
How many bags of cement do I need for 12×12?
To determine how many bags of concrete you will need, divide the total cubic yards needed by the yields, at 4 inch thick, for a 12×12 slab you will need 1.76 yards of concrete, so number of 80lb bag of concrete = 1.76 ÷ 0.022 = 80 bags, No. of 60lb bag = 1.76 ÷ 0.017 = 104 bags & No.
How do I calculate how much concrete I need?
Use the formula. Calculating the volume for concrete requires using three dimensions: length times width (which is area) times the height (thickness) or L x W x H. If you are using feet as your standard unit of measurement, this formula will give you the volume of concrete in cubic feet.
How many 80 lbs bags of concrete make a cubic yard?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete.
What do you put under fence posts?
Setting Fence Posts in Gravel Gravel is best for fencing in heavier (more clayey) soils, and won’t work well if you have loose, sandy soil. Gravel also allows water drainage around the fence posts, making the posts less susceptible to frost heaves. Dig the holes the same way as you would to set posts in concrete.
How do you protect a wooden post from rotting in the ground?
Placing a thick layer of loose gravel at the bottom of the post hole will allow groundwater to trickle through the rocks and down away from the base of the post. This will prevent the post from rotting by keeping it constantly dry. You can purchase gravel at a local hardware store or landscaping-supply business.
Is pea gravel good for fence posts?
Setting wood or vinyl fence posts is a critical part of fence construction to make sure that the fence is sturdy. The use of pea gravel to help set posts provides good drainage and, when combined with concrete, results in a sturdy fence post installation.
What happens if fence posts aren’t deep enough?
Anything less than 24 inches will put your fence at risk of blowing over in adverse weather conditions. Remember, these are wood posts that have been set in concrete, if your fence post isn’t deep enough, it is prone to snapping and collapsing all of your hard work.
How deep should a 8ft post be?
How Deep Should a Fence Post Be? For an average fence post, about 6 to 8 feet tall, prepare to dig a post hole about 2 feet deep. To install a fence post, you’ll need a shovel or post digger, a 6-foot level, soil, and gravel or crushed stone.
Should fence posts be set in concrete?
Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
Do fence posts need to go below frost line?
All fence posts should be cemented in the ground below frost level. Check your local frost level and dig deeper by at least 6″.
Can you set a post with dry concrete?
Like a good wine, a dry setting concrete will take time to set fully. A quick setting product may not be the best one, and the standard setting time is around four hours. Make sure the post is plumb at all times during the process. Do not attach any weight or do any work on the post while the concrete is drying.
What kind of gravel should I use for fence posts?
Pea gravel is commonly used for fence post holes. Gravel that is roughly three eighths of an inch in size is generally a good medium between drainage and support, though gravel close to that size also may be used.
