Table of Contents
The size of fireplace insert you require is related to the size of your existing masonry chimney. There are five key dimensions to measure – the height and width of the opening, the height and width of the back wall of the fireplace and the depth of the fireplace.
How do I know what size fireplace insert I need?
The key factor in selecting the size is based on the opening of the existing fireplace. To determine the right size, measure the following: opening height; opening width; opening depth (top and bottom); rear width and the depth of the hearth (area in front of fireplace).
What is the standard fireplace size?
The average fireplace has the following dimensions: An opening that’s between 24-36 inches wide, 24-29 inches high, and 16 inches deep. On average, the distance between the hearth and the damper is about 37 inches. The fireplace’s rear firebox is generally between 11-19 inches wide, with a height of 14 inches.
Can I put an insert in my fireplace?
Professionals can install a fireplace insert into your existing fireplace with a masonry chimney. Upgrading to a fireplace insert can help you take advantage of a greater heating efficiency compared to an older wood-burning fireplace.
Are fireplace inserts standard size?
Fireplace Insert Sizes Fireplace inserts are not one-size-fits-all. They must be the right dimensions for your particular space, so measure the height, width and depth of your fireplace from the back wall to the front opening. The larger the room, the more heat you’ll want it the fireplace insert to produce.
How do you size a gas fireplace insert?
Helpful Tips: Measure the front opening of your fireplace. Measure the back width of your fireplace. Measure the depth of the floor from back wall to the front of your fireplace. Measure the inside height of the fireplace from the floor to the lowest point inside the fireplace.
How wide is a standard fireplace brick?
Firebox Dimensions and Chimney Heights Fireplace Opening Width 24″ 36″ Firebox Depth 16″ 16″ Rear Firebox Width 11″ 23″ Rear Firebox Wall Vertical Height 14″ 14″ Nominal Flue Size 8×12 12×12.
How wide should fireplace surround be?
Your mantel should be wider than your fireplace. Typically, a mantel should be a minimum of 3 inches past the firebox on each side. However, more can be better. The average mantel is approximately 6 inches wider than the fireplace on either side, and some can be even wider.
How much does it cost to put in a fireplace insert?
How much does a fireplace insert cost? Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select. Some electric models cost significantly less, but they offer less heat output than wood and gas fireplace inserts.
Can I put an electric fireplace insert in my fireplace?
Electric fireplace inserts can be installed inside your existing fireplace to help give it a fresh new look and to help reduce the work that’s required when having real wood burning fires in your home. Electric fireplace inserts simply need to be plugged or wired into your home electrics in order to work.
What is the difference between a fireplace and an insert?
Fireplaces will have large viewing areas and box dimensions because they are designed to be built into new construction and not limited by the existing fireplace opening size. A fireplace insert is basically a stove, wood or gas, that is designed to be inserted into a fireplace that is already there.
What widths do electric fireplaces come in?
Portable Fireplace mid-size electric fireplaces can be found within our 41-45 inches electric fireplaces category and or our 46-50 inches electric fireplaces category. Large electric fireplaces are a good match for your living room, master bedroom, main living area, and or the large lobby of your business.
Are fireplace inserts worth it?
Are Fireplace Inserts Worth the Money? Savings: Fireplace inserts can help you to cut down on your heating bill. A fireplace insert is not recommended as a sole use of heating but when used in conjunction with turning down your thermostat, can save you money on your heating bill.
What are brick dimensions?
It all depends on the type of brick you are using, however the most common brick size for normal face brick (usually used for external walls) is 76mm high x 230mm long x 110mm wide. However, other brick types (such as double course bricks) will differ in their sizing.
How thick is a fireplace wall?
Smoke chamber walls shall be constructed of solid masonry units, hollow masonry units grouted solid, stone or concrete. The total minimum thickness of front, back and sidewalls shall be 8 inches (203 mm) of solid masonry.
What is the average width of a fireplace mantel?
For a quick reference, a 36-inch fireplace will probably have a mantel width of 48 inches. A 42-inch fireplace will probably have a mantel width of 54 inches. The mantel should not be so wide that it reaches anything else, like a wall, window or door.
What is the code for fireplace surround?
The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.
Should the fireplace be wider than the TV?
For the false wall options, generally there is a rule of thumb – always make sure the fireplace is wider than the TV. This allows the wall to frame the TV, while offering sleek lines for the edges of the fireplace. Having more space beyond the TV edges can sometimes make the TV look too small for the wall it is on.
How do you fit a fireplace insert?
Installation Steps Put a Cover Plate on Your Chimney. It is recommended to put a cover plate on your chimney before installing an electric insert to prevent water from coming in. Close and Seal the Damper. Install a Power Outlet. Insert the Firebox into Your Fireplace. Attach The Trim or The Frame.
What is a zero clearance fireplace insert?
Zero-clearance fireplaces are pre-manufactured fireplaces that can be installed almost directly against combustible materials like wood, walls, or panelling. The construction and materials of the firebox do not allow the outside temperatures of the firebox to affect those materials and do not require a hearth.
