Table of Contents
How much does it cost to install a wall-mounted toilet?
For installation, a wall-hung toilet typically requires more labor, leading to average installation costs of around $350, while a standard toilet can be installed for about $180. Expect to pay about twice as much for installation, but prices vary in different areas.
What do you need to install a wall hung toilet?
Wall hung toilets Installing a wall hung toilet requires a stud wall or section to be built in order to make room for the cistern and mounting frame. The frame provides the support for the toilet as well as the cistern, and the flush buttons are incorporated so they are in a convenient location.
Are wall hung toilets a bad idea?
Wall-mounted toilets are really good for the modern homeowner but, they need that extra care going in. While they have some noteworthy features that add to their comfort and cleanliness levels, they are not very economical in the long go. So, it is up to you.
How thick does the wall have to be for a wall-mounted toilet?
Plumbing requirements A wall-mounted commode requires a 10-inch-thick wall to accommodate the concealed tank and flushing system. Therefore, an extra wall has to be constructed (at least up to the height of the concealed cistern) for installation of the wall-mounted commode.
Are wall hung toilets more expensive?
Wall hung toilets are costlier than standard toilets but are available at many price points. Prices may range from under $200 up to over $3,000; be aware of potential hidden costs, as some toilets include just the bowl without a seat, carrier, or tank.
Do wall hung toilets save space?
Wall hung toilets are a great space-saver. Without the extra bulk of a visible cistern sitting on the pan they take up much less space in the bathroom, and can be placed closer to furniture, shower enclosures, or whatever else you are planning for your bathroom. And it’s not just the physical space they save.
Can you put a toilet on an inside wall?
Generally, you can install a toilet on an internal wall as long as there is enough room underneath the floor to run the waste line to the mainline. If there is enough room, the only other requirement is that you have a wall with the proper structural studs in it and cavity space for the piping.
How much will a plumber charge to install a toilet?
How much will a plumber charge to install a toilet? Toilet installation costs range from $224 to $531, with the national average at $372. Plumbers can charge anywhere from $65 to $250 per hour for labor costs.
Can HDB install wall hung toilet?
So yes, if you stay in an HDB and want a wall-hung toilet bowl, it is possible.
How much does it cost to install a toilet labor only?
At that price range and duration, the cost of labor alone for a typical toilet installation project could be as little as $90 or as much as $600 at the extreme end, though the majority fall within the $122 to $228 range.
Are hanging toilets safe?
The biggest concern for a toilet is the risk of leaks, and most wall-hung toilets have eradicated this risk with their single mould design. This helps to remove the risk of leaks. Without joints there’s nothing that can fail and let the water out.
What is the advantage of a wall hung toilet?
Unlike close-coupled and back-to-wall toilet options, wall-hung solutions expose a greater cleanable surface area as there is no pedestal, cistern or exposed pipework leaving little space for germs or dust to accumulate. This make wall-hung toilets the ideal choice for hotel lobby washrooms and workplaces.
Do wall-mounted toilets work?
Wall-mounted toilets can save as much as 10 inches by moving the tank into the wall. And the bowl itself can be adjusted to sit anywhere from 15 to 19 inches off the ground.
Which is the best wall hung toilet?
Best Wall Mounted Toilets Swiss Madison Wall Hung Toilet. Kohler Wall Hung Elongated Toilet Bowl. American Standard Wall Hung Elongated Toilet. Toto Aquia Wall Hung Dual-Flush Toilet. Homary Wall Hung Elongated Toilet Bowl. Duravit Large White Wall Hung Toilet. Cerastyle Lila Round Ceramic Wall Mount Toilet. Buyer’s Guide.
Why are wall mounted toilets so expensive?
They’re more expensive. Because wall-mounted toilers are considered specialty items, they’re considerably more expensive than regular toilets. The items itself costs a lot more and the cost of installation usually doubles that number.
What are the disadvantages of wall mounted toilet?
These potential pitfalls include: Difficult Installation: Installing a wall-mounted toilet is usually more difficult than installing a conventional toilet. In general, you’ll have to remove drywall and reinforce the wall you’re going to attach the toilet to.
Do rimless toilets splash?
Do Rimless Toilets Splash? There is a chance this can happen, but that’s the same for any toilet really. As with standard rimmed toilets, the water that flows into your rimless toilet cistern is supposed to be controlled.
What is the difference between a close coupled toilet and a back to wall toilet?
Close coupled – where the cistern sits directly on the back of the toilet pan. Back to wall – where the toilet pan fits against the wall or a piece of furniture and a concealed cistern provides the water for flushing.
Are short projection toilets comfortable?
Short projection toilet Whilst toilets with a projection (that’s the distance from the front of the pan to your wall) of between 595mm and 800mm are comfortable for most adults, generally, a toilet with a pan that has a depth of less than 650mm is considered “short projection” and intrudes less on the space around it.
What is the smallest space for a toilet?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.
