Table of Contents
Turn Off Water Turn Off Water. Connect Supply Lines to Faucet. Apply Sealant and Position Faucet. Screw on Mounting Nuts. Connect Supply Lines to Shut off Valves. Apply Sealant to Sprayer Base. Screw in Mounting Nuts. Screw in the Sprayer Hose.
How do you install a sink sprayer head?
How to Install a Kitchen Sink Spray Nozzle Remove the cover on the attachment hole next to the faucet. Turn off the hot and cold water valves underneath the sink. Insert the spray nozzle guide into the hole on the sink. Slip the spray nozzle nut onto the large end of the hose. Add the small metal clip onto the hose.
How do you add a sprayer to an existing faucet?
It usually has a round-shaped stopper closing over it. Step 1 – Prep the Faucet. Step 2 – Examine the Faucet. Step 3 – Install Sprayer Hole Flange. Step 4 – Assemble Pipe Fittings. Step 5 – Prepare Hose for Install. Step 6 – Install the Sprayer.
Can you install a kitchen faucet without the sprayer?
Without connecting the sprayer, the faucet will work. If the additional hose isn’t connected, the valve will remain shut. You’d be paying more for the spray that you don’t use.
How does a kitchen sink diverter work?
The diverter inside your kitchen faucet redirects the water from the faucet spout to your faucet sprayer when you press the sprayer trigger. When you squeeze the trigger, the water pressure drops to engage the diverter. This stops the water flow at the spout and moves it to the sprayer.
How do you take apart a kitchen faucet spray head?
Remove Spray head: by pulling it out or down with the hose and unscrew it from the hose (counter clockwise by hand). Direct hose to the sink and turn water on. If there is good pressure out of the hose only, then clean the spray head or remove the check valve and clean it.
How do you fix a spraying faucet?
Good news, it’s easy to fix! Wrap the rag around the faucet aerator. Grip with your pliers and turn clockwise to loosen. Clear any loose debris or buildup from the faucet and screen. Then place the O-ring and screen in a bowl of vinegar, and let sit. Rinse off your aerator, screen, and O-ring, then re-assemble!.
How do you remove a quick connecter sprayer?
Push the quick connect up to compress it and keep holding it or the hose while doing this. Put your fingers on the very top of the white quick connect adapter while maintaining the hose upward. Pull the quick connect down and release the hose at the same time.
Can you replace just the sprayer head on a kitchen sink?
Kitchen sink spray heads often are installed at the same time as a new faucet to add more functionality to your sink. Replacing a kitchen sprayer might seem complicated, but it is a simple job that doesn’t require a call to the plumber. Most replacement sprayers are quickly installed in a few basic steps.
What is the spray thing on the sink called?
A sprayer. The sprayer hose on some kitchen sinks can be used for direct water spray. When the sprayer is depressed, the hose is attached between the faucet and water supply with a valve that controls where the water goes.
What is a diverter on a kitchen faucet?
The diverter inside your kitchen faucet redirects the water from the faucet spout to your faucet sprayer when you press the sprayer trigger. When you squeeze the trigger, the water pressure drops to engage the diverter. This stops the water flow at the spout and moves it to the sprayer.
Where is the diverter valve on a kitchen faucet?
The diverter assembly is located in the back of the faucet body, facing away from you sink. It is a small black part that is inserted into a hole in the faucet body (Fig. 4). Using a needle nose pliers, pull out the old diverter assembly by grabbing on the “fins” of the assembly.
How do you bypass a faucet sprayer?
Turn off the faucet once you get the sprayer to close and apply some penetrating oil to the valve button to make it slide more easily. Turn off the hot and cold water valves and unscrew the sprayer from the hose with adjustable pliers if you can’t push in the valve, or it won’t stay in.
Can you replace faucet without replacing sprayer?
You have to replace the old faucet first to install a kitchen faucet without using the sprayer. If you have a sprayer and don’t want to use it, disconnect the extension line. And then remove it. You can install a single-hand faucet to ignore the sprayer.
How does a side spray diverter work?
The diverter is usually located inside the faucet. When you press the trigger on the spray nozzle, the water flowing into your faucet is diverted to the sprayer. The water travels from the faucet through the hose and out the spray nozzle. If the faucet is shut off, you won’t be able to get water from your sprayer.
How does a pull out faucet work?
The pull-down kitchen faucet works by allowing the spray head to extend down into the sink. You turn the water on using the single handle as usual. At the same time, you can mix the hot and cold water using the same handle. The water from the handle goes back down to the main controller unit under the sink.
Why does my kitchen sink sprayer not work?
Why does my sink sprayer not work? More often, when your sink sprayer fails to work, the main problem is always with the diverter. You can always check this by removing the sink sprayer head and turning on the water. If the water flow is weak, you should start budgeting for a new diverter and replace it soon.
