Table of Contents
How deep and wide do deck footings need to be?
For most deck applications, in most jurisdictions, the width of a footing should be 20 inches round and a minimum of 24 inches deep. It is important that the base of the footings be solid, and in many cases you will need to keep digging until you reach undisturbed soil.
How many footings do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck. These must be topped with adjustable post caps.
How deep should I dig for a deck post?
Set footers a minimum of 6” below the frost line for your area to prevent movement during freezing temperatures. Pour about 6 inches of all-purpose gravel into postholes and pack the gravel tight by using the end of a wooden post.
What diameter do deck footings need to be?
A good size for a common backyard deck is a 10″ or 12″ diameter for the sonotube and a 20″ base diameter. Of course, you can get a 24″ base size and it will spread weight over an even greater surface area.
Do ground level decks need footings?
If you want to expand your outdoor living space, a ground level deck might be your best option. Since it’s not connected to a house, it can go anywhere in your yard and doesn’t require deep footings. Because it rises just inches above ground, it doesn’t need stairs or railings.
How much does it cost to build a 12×16 deck?
12×16-foot Raised Deck: You could build a 12×16-foot treated-lumber raised deck with stairs, for about $3,100 in materials. Hiring someone to do the work for you brings your total cost to $3,700-$9,500.
How many joists do I need for a 16 foot deck?
For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.
How do you calculate deck footings?
The formula I use to calculate footing area is (tributary load + net concrete) ÷ soil bearing capacity. Here, I’ll use 1,500 psf for the soil bearing capacity. (1,912.5 lb. + 120 lb.).
How deep should 4×4 posts be for a deck?
Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How deep should a 6×6 post be in the ground for a deck?
In general, the holes should be at least 3 feet deep for posts that protrude 8 feet or more above the level. Inserts that extend 6 feet above the ground should have holes that are at least 2.5 feet deep.
Should I use 4×4 or 6×6 deck posts?
Unfortunately, a 4×4 post may not be able to withstand the weight, causing the entire porch to buckle. A 6×6 post gives you a little more long-term stability, particularly in those colder climates. Not only does it perform better when carrying heavier loads, but it also makes the heading for your roof more secure.
What is the standard footing size?
Footing width can vary according to the structure, site, and conditions. Under code, generally, one-story buildings with footings on undisturbed soil with LBVs between 1,500 and 4,000 should have a minimum width of 12 inches. Two-story buildings require a minimum of 15-inch wide footings for 1,500 LBV soil.
What size footings do I need?
You can look up the recommended footing size, based on the size and type of house and the bearing capacity of the soil (see the table above). As you can see, heavy houses on weak soil need footings 2 feet wide or more. But the lightest buildings on the strongest soil require footings as narrow as 7 or 8 inches.
What size sonotube for a 4×4 post?
The rule-of-thumb is to use a tube diameter 3 times the post width, therefore use a 12” diameter Sonotube for a 4×4” post.
How do you build a deck without footings?
Instead of using footings, adding a level of gravel will give you the drainage aspect you are looking for. You can then add a frame of wood that anchors in concrete blocks that sit in the gravel, creating your new deck. Concrete blocks won’t rot, making them an ideal option for those who don’t want to use wood.
Can I build a deck directly on the ground?
Yes, you can build a deck directly on the ground, but with some conditions. A deck on the ground must be built with ground-contact wood, and the substructure needs to be adapted for minimal height. Even though technically a ground level deck is elevated up to 24”, here we will discuss decks built less than 8” high.
Can I use deck pier blocks instead of footings?
Pier blocks can be used instead of footings for a ground-level deck not requiring permits. Piers blocks can also be used if the frost level depth is less then the height of the pier block.
Is a 12×16 deck big enough?
Party Perfect (12 ft x 16 ft) A 12×16 deck gives you room enough to break your space into zones for everyone in the family. Let the teens hang with their squad while you and your BFFs huddle in our deep seats.
How much does a 14×20 deck cost?
New Deck Installation Cost The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
