Table of Contents
What to use to clean deck before staining?
Deck cleaners, such as the Wood Deck Cleaner and Brightener by DeckWise or the TimberTech Deck Cleaner, will lift and remove any stuck-on grime from your wood deck boards. These deck cleaning solutions will soak down into the dry wood.
Do you have to wash a deck before staining?
A: Yes. The answer is simple enough, but it really should be remembered that it’s important to remove all dirt and contaminants from the surface of wood to ensure proper stain penetration and maximum durability of wood stains.
Should I pressure wash or sand my deck before staining?
Power washing a deck is a quick and efficient way to get it ready for painting or staining, but it isn’t a necessary prerequisite. There are less aggressive alternatives to power washing that remove stains and surface discoloration, and if you don’t have success with any of them, you can always sand the deck.
Can I use bleach to clean deck before staining?
Unfortunately, decks are often susceptible to dirt and algae because they’re outside. Contrary to popular belief, chlorine bleach is not a great cleaner for a wood deck. Luckily, you can use powdered oxygen bleach to scrub down and clean your deck without damaging the deck’s wood or any surrounding plantlife.
What is the best thing to clean decking with?
To avoid damaging your decking, create a gentle cleaning solution with warm water and liquid dish soap. Alternatively, you can use a speciality wood deck cleaner. Saturate the surface and scrub the deck with a stiff-bristled brush or sponge until the cleaning solution starts to lather.
How do you clean pressure treated wood before staining?
Wash the Wood Allow it to dry before staining. Wash the pressure-treated wood with a deck cleaner, scrubbing the wood surface with a brush while wet. Use a pressure washer if the wood has tough stains. Allow the wet cleaner to soak into the wood for about 10 minutes or to manufacturer’s directions.
What happens if you don’t clean deck before staining?
Before you apply stain, make sure the surface is clean (no dust, dirt, wood fibers or grease), dry and free from mildew. When a surface is not clean, stains and other finishes have trouble sticking and may end up peeling.
How long should I wait to stain my deck after washing it?
After a deck has been power washed it will have some retained moisture within the wood. It’s important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining.
Should you sand deck before staining?
Sanding your deck before staining strips the outer layer of sealer and stain, and removes damaged wood and smooths away splinters. Sanding by hand with a pole sander is the safest method for both you and the deck, but can be very slow.
Can I pressure wash my deck instead of sanding?
That being said, sanding is a lot of work. You can get the same clean, fresh surface with a good pressure washing. A pressure washer removes the deteriorated finish and some of the decayed wood fiber leaving a like-new surface after the wood dries.
Do I need to sand deck after pressure washing?
Make sure your deck is thoroughly dry before you sand. If there has been recent rainfall or if you have power washed, wait several days before sanding. Treat the deck surface, the railings, and the edges of boards as different tasks, varying the sanding techniques for each.
Is bleach bad for wood decks?
Cleaners containing Chlorine Bleach are commonly used to clean decks but they are not recommended for cleaning treated wood. Excessive use of chlorine bleach containing cleaners (sodium hypochlorite or calcium hypochlorite) can damage treated wood leaving it with an unnatural whitewashed appearance.
Can bleach be used to clean a wood deck?
Bleach will not remove some of the dirt and grime that may be present in the wood. Bleach is not a great wood cleaner, it can damage the wood fibers, and can be unsafe to handle. Stick with cleaners that are designed for wood cleaning and prepping wood decks for stain.
How do I get rid of mold on my deck before staining?
White distilled vinegar: White vinegar is a popular natural cleaner that can be used both inside and outside. Simply combine one gallon of water with one cup of white vinegar and scrub the deck with the solution to remove algae, mold, and mildew.
How do you clean the outside of a wooden deck?
Sprinkle baking soda on affected areas of deck. Mix vinegar, soap, and water in a bucket, apply to one section of mildew-infested decking, and scrub with a brush until you see results. This method may have to be repeated for a thorough job.
Can I use washing up liquid to clean my decking?
To avoid damaging the deck, create a delicate cleaning solution made up of warm water and washing up liquid. Let the solution stand for 5-10 minutes, or according to the instructions on the deck cleaner if using. Lastly, rinse the area with clean water and leave the wood to dry.
How do I clean my deck without a pressure washer?
The recipe is pretty straightforward: Add half a cup of baking soda to one gallon of water; Mix in 1/8 of dish-washing detergent; Spray on your concrete deck and allow it to sit for half an hour; Scrub thoroughly and rinse with a hose. Apply a coat of concrete sealer to protect your deck from future stains.
Do you need to sand pressure treated wood before staining?
All wood, except manufactured products like composite wood — even pressure-treated lumber — need to be sanded and stained. If you want it to last, you have to put in the time and some elbow grease.
