Table of Contents
What is starter molding?
A Starter or Riser Molding is mounted to the cabinet top in order to simulate an extension of the cabinet box, allowing the Crown Molding to be installed higher.
How do you fill the gap between kitchen cabinets and ceiling?
You can build the cabinets to the ceiling (most expensive option), keep the area open (no cost!), build a soffit to match the cabinets, or add a drywall soffit.
How do you install cabinet filler strips?
Steps: Cut the filler strip to length with a miter saw. Rip the filler strip to width with a table saw and fine tooth blade. Optional but preferred to remove any saw tooth marks: run a portable planer down the filler strip for a perfect edge. Clamp the filler strip to the cabinet using a cabinet claw or cabinet clamp.
What is the molding called on top of cabinets?
Crown molding is decorative trim that is added to the top of your cabinets. The benefit of installing crown molding is that it draws the eye upward, showcasing the elegance of your cabinets. Crown molding can either bond with the ceiling or allow for space above the cabinet.
What does scribe molding look like?
Scribe molding is a thin strip of wood that covers gaps or inconsistencies where the cabinet meets the ceiling or wall. The piece of wood is typically straight on the end that is placed against the wall, but the other end is curved to fit the cabinet.
Where do you put moulding?
Lay the moulding with its back flat against the bottom of the miter box or the bed of the power miter saw. For inside corners, cut through the face at 45° so the edge of the cut is visible from the front. For outside corners, cut through the face at 45° so the edge of the cut is hidden from the front.
Which side of crown molding goes up?
Crown moulding is installed in the reverse fashion of base moulding. The deeper grooves go on the bottom, and shallower grooves belong on the top. Generally, crown moulding extends further down the wall than on the ceiling. The concave (cove) side goes down, and the convex (rounded) side goes up.
What is a light rail on kitchen cabinets?
Light rail molding is used to hide the fixtures of any top cabinet’s underside lighting system. The use of this style of molding is primarily functional, but it can also be used to create an eye-catching finishing detail to the top cabinet project.
What is light rail molding used for?
Light rail molding is designed to hide the fixtures of a cabinet’s underside lighting system. Though its primary purpose is in fulfilling this function, this style of molding can also be crafted to add another level of striking detail to a cabinetry project.
Why do kitchen cabinets not go to ceiling?
Disadvantages of Kitchen Cabinets That Go All The Way Up to the Ceiling. Ceiling height cabinets are not easy to access as they are very high up in the ceiling. Anything up there at the top of these cabinets is quite hard to access hence you will need to have something to step on in order to reach these things.
How can I hide the gap between my ceiling and crown molding?
You can minimize the appearance of the gap by simply squeezing in some silicone caulk between the molding and the ceiling. Unfortunately, it may leave some excess caulk once you apply it. However, you can remedy this by taking a damp cloth and wiping away the excess (use mineral spirits with silicone caulk).
What is cabinet filler strip?
A filler strip is a piece of wood or plastic that is used to cover an opening or gaps in woodworking. Filler strips are available to match almost all wood types and finishes that are used for cabinets, and they are fairly easy to install. A filler strip can be secured with adhesives, nails, screws or bolts.
What is a cabinet filler?
A filler is a piece of finished wood used to “fill” openings or gaps between cabinets, or a cabinet and any obstruction, that would inhibit the doors or drawers from fully functioning. Typically, fillers are used to finish the space where an overall dimension of cabinetry is less than the overall wall dimension.
How do you scribe cabinet fillers to the wall?
Step 1 – measure the widest gap between the wall and cabinet side. Step 2 – rip your filler strip to that size. Step 3 – Set your scribe distance – this will be the largest gap between the wall & strip. Step 4 – With the scribe tool, transfer the wall’s shape onto the strip. Step 5 – We’re done! Tools.
Can you add trim to cabinet doors?
STEP 4: CUT INSIDE MDF TRIM PIECES FOR CABINET DOOR Once both side pieces are attached, you can add the inside trim pieces. After cutting the trim pieces, take them back to the cabinet door and see how they fit. If the trim piece is too big, cut a little bit more from the MDF.
Is crown molding necessary on kitchen cabinets?
Crown molding is an iconic look for traditional cabinets. Without it, wall cabinets are typically left incomplete and need the finished look. This applies to kitchens that can afford to have the molding installed.
What trim do you put under cabinets?
#12 – Scribe Molding Scribe molding is a thin piece of trim that covers any gaps between your cabinets and the wall. It’s a way solve any visible inconsistencies that occur when remodeling in older homes.
How do you apply scribe molding to cabinets?
Position the Scribe Molding Position the piece of scribe molding along the seam where the back of the cabinet meets the wall. Ensure the flat side of the molding fits along the cabinet, with its edge pressed snugly against the wall. The molding “gives” slightly, conforming to marginal curves in the wall.
Do you put shoe molding around cabinets?
Shoe Molding – Also known as corner round is applied to the perimeter of the base cabinets on the floor. It is good for hiding flooring imperfections where it might not go exactly up to the cabinet. If you are not a fan of shoe molding you can install the cabinets after the flooring is installed.
Where does Scribe go on cabinets?
Scribe is essentially a thin strip of wood that runs along the edges of your cabinet to cover gaps, blemishes, and other inconsistencies where the cabinet meshes against the wall or the ceiling. It’s usually straight on one end and can be curved fit the contour of the cabinet.
