QA

Quick Answer: How To Build A 12X16 Deck

How much does it cost to build a 12×16 deck?

12×16-foot Raised Deck: You could build a 12×16-foot treated-lumber raised deck with stairs, for about $3,100 in materials. Hiring someone to do the work for you brings your total cost to $3,700-$9,500.

How many joists do I need for a 16 foot deck?

For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.

How far apart should my deck posts be?

In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame. The maximum distance between footings is determined by the size of your joist material.

Is a 12×16 deck big enough?

Party Perfect (12 ft x 16 ft) A 12×16 deck gives you room enough to break your space into zones for everyone in the family. Let the teens hang with their squad while you and your BFFs huddle in our deep seats.

What is the cheapest way to build a deck?

Choose wood, but carefully: Untreated wood decks are generally the cheapest to install, but don’t forget long-term costs. Wood decks require yearly maintenance and deteriorate quickly if they don’t get it.

What size beam do I need to span 16 feet?

For 16 foot span, size of beam for 2-3 storey residential building, using thumb rule,1 foot (span of the beam) = 1inch (depth of beam), is about 12″×16″ in which beam width is 12″ and beam depth is 16″ providing with 2nos of 12mm bar at top, 2nos of 16mm bar at bottom and 2nos of 12mm crank bar of Fe500 with stirrup T8.

Should deck joists be 2×6 or 2×8?

In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists. 2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards.

Should I use deck boards or 2×6?

2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.

How many footings do I need for a 12×16 deck?

A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck. These must be topped with adjustable post caps.

Should I use 4×4 or 6×6 deck posts?

Unfortunately, a 4×4 post may not be able to withstand the weight, causing the entire porch to buckle. A 6×6 post gives you a little more long-term stability, particularly in those colder climates. Not only does it perform better when carrying heavier loads, but it also makes the heading for your roof more secure.

Is it hard to build a deck yourself?

Building a deck is not as hard as you might think, and if you follow some basic guidelines it can be a great DIY project. Decks are built to add living space to a home and every one of them should be built nice and level.

What is a good size deck for entertaining?

However, the average size of a deck should range between 300 and 400 square feet. Larger decks can be constructed with multi-level designs and bigger square footage depending on the space available. Generally, a deck should be wider and the longer side should be proportionate to the house.

How big is too big for a deck?

Size of Your Home Most builders suggest that your deck should be no larger than 20 percent of the house’s* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!May 21, 2020.

What is a good size for an outdoor deck?

A small deck intended to hold a round dining table should be at least 12 feet by 12 feet, while a large deck can be designed with much more space. The average deck size is between 300 and 400 square feet. Generally, a deck should be wider than it is deep, with the longer dimension running along the house.

How can I save money building a deck?

The Top 8 Ways to Save Money Building Your Deck Choose the Right Type of Deck. Make an Efficient Deck Design. Low-Cost Materials vs Maintenance-Free Materials. Shop for the Deck Sales. Off-Season Building to Save Bucks. Buy Fasteners and Hardware in Bulk. DIY Build for Definite Savings. Seal Your Deck.

What is a floating deck?

A floating deck, also called a free standing deck, is simply a deck that’s not attached to any structure, including (of course) your house. Instead, you can put your deck’s structural members — posts, girders, and joists — on precast pier blocks set directly in the ground.

How do I estimate the cost of a deck?

The average cost to build a deck is $25 per square foot with most homeowners spending between $4,380 to $10,080 total. An entry level deck with basic materials costs $15 per square foot, while a deck built with premium materials costs $35 per square foot.