Table of Contents
Inside-Mounted Horizontal Blinds Measure exact window width at top, middle, and bottom. Use the narrowest width. Do not make any deductions – provide the exact measurements of the narrowest width. Measure exact window height at left, middle, and right side. Use longest height.
How much space is needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
How do you measure for replacement blinds?
Fortunately, you can get measurements in three simple steps: Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
What is the standard size for window blinds?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How much should I deduct for interior mount blinds?
When you specify inside mount, we will make a size deduction to allow for operating clearance. We will deduct up to 1/4″ from each side (on vertical blinds there is also a height deduction of 1/4″). The deductions are made so that the blind will not rub or scratch your window frame.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How do you measure a roller blind for a window?
Use a metal tape measure for accuracy. Measure the width at 3 different points as it may not be consistent along the entire recess. Measure at either end and in the middle, and use the smallest measurement as your width guide. For venetian, roman and roller blinds reduce the width by 1cm to allow for smooth extension.
Does the width of a roller blind include the fittings?
For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
What width size do mini blinds come in?
Sliding Window: Standard heights are 24, 36, 48 and 60 inches, and standard widths are 36, 48, 60, 72 and 84 inches.
How should mini blinds fit in the window?
Determine Inside Mount or Outside Mount Inside mount mini blinds will fit inside the window opening (Recommended) Outside mount mini blinds will cover beyond your window opening in width and height.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How do you fit blinds to UPVC windows without drilling?
How To Hang Blinds Without Drilling Holes Magnetic Blinds. The magnets at the back of these brackets make installation a rather seamless process. Tension Rods. Hang these blinds on a tension rod, which you can position inside your window trim. Command Strips. Self-Adhesive Blinds.
What length should blinds be cut?
Typically, a set of inside-mount blinds should measure about 1⁄2 inch (1.3 cm) less than the width of the window frame. Make sure you measure the inside of the frame, where the blinds actually fit, and not the entire window frame. Measure in at least three places — the top, bottom, and middle of the window.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
What does exact mean in blinds?
Exact is when you want your blind to be fitted on the outside of the window recess.
What is the difference between exact and recess blinds?
A blind that is fitted outside of the recess is normally referred to as an exact fitting, and is attached to the wall above the window, covering both the window and part of the wall on either side of the recess.
What does recess and exact mean when ordering blinds?
Recess blinds are designed to fit snugly within the window opening itself, while exact blinds generally sit outside the window recess, overlapping slightly on either side.
How do you measure for replacement vertical blinds?
If you have an existing slat that you are looking to replace, then you can measure this. Remove the bottom weight and measure the total hem to hem drop of the fabric slat from the very top to the very bottom, ensure the fabric is flat with no folds or creases. This measurement is the drop size you will order.
What is the difference between inside mount and flush mount?
Minimum inside mount depth is the amount of depth required to securely mount the shade/blind inside the window frame. The minimum flush mount depth is the required mount depth needed for the shade/blind to fit fully inside of the window frame, without protruding outward at all.
What does flush inside mount mean?
Inside mount refers to blinds and shades that are installed within the confines of a window frame. That means the headrail is attached flush with the top of the window frame and the window treatment is fully contained inside the four corners of the frame itself. Pros: Inside mounts provide a sleek, built-in appearance.
