Table of Contents
How does adjustable closet rod work?
Adjustable closet rods have a rod that fits inside a slightly larger-diameter tube. The two pieces slide apart to fit the width of the space. At their shortest, adjustable closet rods are as stable as a solid rod. The further apart they slide, the weaker the rod becomes, even if the material itself is sturdy.
Are closet rods adjustable?
The Symple Stuff chrome finished closet rod is adjustable from 48-72 inches, and fits most standard closets. Easy to install with mounting plates on both ends (mounting hardware included). A great solution for hanging clothes in your closet for storage and organization.
How do you adjust a hanging rod?
5 Steps to Adjusting Your Closet Rod Remove clothes from the rod. To make the rod easier to move, remove all of your hanging clothes for now. Push up on the rod to remove. Reposition the clips. Ensure the rod opening at the bottom. Reattach the rod to the clips.
How do you support a closet rod?
Before installing a closet rod, it is best to place closet brackets in a position on the wall that allows for the most support. This will require a stud finder. Once wall studs have been located, closet rods and brackets can be screwed into the stud for optimal support.
How do you hang a closet rod from the ceiling?
Draw a straight line on the ceiling at right angles to the joists using a yardstick or straightedge tool as your guide. Make the line the length of the closet rod you purchased for the project. Put the line at least 12 inches from the back wall of the closet to allow room to hang clothes hangers on the clothes rod.
How far from Wall should closet rod be?
As a rule, place the top rod 80 to 82-inches up from the floor and the bottom rod about 40-inches up from the floor. For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging.
How long can closet rods go without support?
If your closet rod is longer than 48 inches, you will need support. However, regardless of how long the closet rod is, if you’re hanging heavier items such as winter jackets, then you will want support no matter what.
How much weight can a wooden closet rod hold?
Never put more than 25-pounds of clothing on one of these rods or it will fail. The motorized version works with a remote control and can hold up to 60-pounds of clothing per rod.
How do you measure a closet rod?
First, position your tape measure horizontally, and measure 12 inches from the rear wall. This marks the ideal depth of the closet rod. Next, you’ll want measure 66 inches from the ground upward, which marks the ideal closet rod height.
Does a closet rod have to be in a stud?
Basic Installation It should be placed in front of a stud so you can screw into the stud to give it support. The typical height of a closet rod is from 60 to 80 inches, and both brackets should be at the same height, or the hooks you hang from the rod will slide to one end.
Do closet rods need studs?
Drywall is thin and cannot hold the weight of a loaded closet rod on its own. The key to proper closet rod installation is using wall studs when possible to support your brackets. This ensures that the load of the closet rod isn’t on the drywall but is instead on solid wood.
How do you use a slanted closet?
In no time, you’ll transform your slanted closet into a functional and beautiful storage space. Be creative with your hanging-rod placement. Try using drawers closer to floor-level. Utilize custom shelving for triangular spaces. Steer clear of cabinet doors. Include custom lighting for a luxurious feel.
Is a metal or wood closet rod better?
Wood rods use a shelf support and a hook for the rod. Metal rods are integral to the shelf and are supported with various wall anchors. When supporting these, you will get more support and stability when you install into the studs, regardless of whether the rod is made of wood or metal.
How can I make my closet rod stronger?
Attach closet rod support brackets at various points along the closet rod. Use a stud finder to locate the studs in either the wall or ceiling. Drill pilot holes, using a drill and drill bit. Alternatively, use self-tapping wood screws and mount the bracket directly into the stud.
How do you maximize a hanging space in a closet?
If most of your clothes are short hanging, add an extra closet rod to instantly double the amount of hanging space. Add-on, cascading and slim profile hangers are other good ways to save space. Finally, give yourself the benefit of drawers in your closet by using hanging sweater and hanging shoe organizers.
How do you make a hanging closet rod?
DIY Hanging Closet Rod Step 1: Cut Dowel to Desired Length. You can have it cut at the hardware store or use a miter box and saw) Step 2: Install Eye Hooks. Drill pilot holes and put in eye screws at each end of the dowel (these will be used to hang the dowel). Step 3: Attach Chain. Step 4: Hang Your Stuff!.
How do you reinforce a tension rod?
The caps on tension rods are often made of plastic, but even rubber ones are so incompressible that moist, smooth surfaces such as tile or fiberglass can’t hold them. You can fix that by gluing rubber shelf lining material to the ends with strong glue – two-part epoxy or contact cement.
Can you use PVC for closet rods?
The PVC pipe was much less expensive than buying custom closet rods and it worked just fine as the closet rods. I put in an extra bracket to support the top rail and prevent sagging in the middle.
