Table of Contents
Fortunately, you can get measurements in three simple steps: Measure the inside of the window frame in three places for width: across the top, middle and bottom. Measure for height: at the left, middle and right side. Measure the depth of the window so you know how deep the blinds can be.
How do you know what size blinds you need?
Measuring for Horizontal Blinds Measure exact window width at top, middle, and bottom. Use the narrowest width. Do not make any deductions – provide the exact measurements of the narrowest width. Measure exact window height at left, middle, and right side. Use longest height.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
Do blinds have to fit exactly?
Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. If the shades are installed outside of the window opening — called an outside mount — the shades typically are wider than the window by a few inches and can also be longer than the window.
What is the standard blind size?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How much space needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
What sizes do ready made blinds come in?
Standard Sizes for Blinds 36 inches. 48 inches. 60 inches. 72 inches.
Are blinds measured width by height?
One of the most important steps is to measure both the height and width in 3 places – top, middle, and bottom. For Roller Shades, Solar Shades, Sheer Shades, or Vertical Blinds use the measurement from the top of the window. For all other styles, use the narrowest width measurement of the top, middle and bottom.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
Are blinds better inside or outside recess?
Why fit outside of the recess? The main advantages of hanging your blinds outside of the recess are that more light will enter the room when the blinds are open. You can block out more light when the blinds are closed. However, any items that you have placed on the windowsill won’t be visible when you close the blinds.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
What is the difference between inside mount and flush mount?
Minimum inside mount depth is the amount of depth required to securely mount the shade/blind inside the window frame. The minimum flush mount depth is the required mount depth needed for the shade/blind to fit fully inside of the window frame, without protruding outward at all.
How do you measure curtain drop?
As a rule, measure the drop from the underside of the curtain rings to ensure the pole can be seen above the curtains. The curtain drop is the length from the top to the bottom of the curtain. The drop will depend on where the base of the curtain is to finish, ie sill, below sill or floor and the heading style.
How do I measure curtain width?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
How do you measure curtain width?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do you install blinds that are too narrow?
Here are some simple installation steps to follow: Position Headrail. Place blind centered in the window with the brackets and mark with a pencil on the top of the window sill on each side of the blinds headrail. Installing the mounting brackets. Install blinds. Install the valance.
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
How do you read window dimensions?
A window’s size notation is basically width and height combined. The first two #’s are for width and the second two #’s are for height. A 2426 Replacement Window would have a width of 2’4″ and height of 2’6″.
What goes first width or height?
What comes first? The Graphics’ industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width.
How wide should outside mount blinds be?
Outside Mount To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width.
