Table of Contents
How do you hang a heavy beam mantel?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do you attach a wood beam to a fireplace?
How do you hang a heavy mantle on drywall?
For stone or brick walls, insert the lag bolts’ sleeves into the pilot holes, then drive the lag bolts into the sleeves with a lag screwdriver. For drywall, use a hammer to tap a wall anchor into each pilot hole not entering a wall stud. Drive 2-inch screws through each pilot hole to hold the mantel in place.
How do you attach a wood mantel to a brick fireplace?
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How do you attach wood beams to drywall?
Covering the Beam Screw drywall to a wooden beam on the three exposed sides to cover them, using type W drywall screws, also called “coarse thread” screws. Add joint compound, commonly called “mud” in the drywall trade, at the inside and outside corners.
How much weight can you hang from a joist?
If you have another floor above your garage, the ceiling\floor structure can usually support up to 40 lbs/SqFt (including the weight of the floor above it). If you do not have another floor above, the ceiling trusses may only be able to hang a maximum of 10 lbs/SqFt.
How do you secure a wood mantel to brick?
Modern Timber Craft says to insert a lag bolt into each sleeve and tighten it with a screwdriver or drill until it is secure. Then, use an angle grinder to remove the head of each bolt. If a different set of hardware is provided with your mantel, anchor the hardware to the brick using screws in the inserted sleeves.
How do you secure a mantel to brick?
Mark where the anchors or brackets line up on the mantel and drill the corresponding holes. Lift the mantel and place it so that the lag bolts or brackets fit into the holes. For extra security, coat the tip of each bolt with liquid nails or another adhesive just before installation.
How do you build a floating mantel on a brick fireplace?
How to build a floating mantel (or shelf): Prep your surface. For me, that meant staining our fireplace white beforehand. Create mantel support. Create a hollow box for your mantel. Finish the mantel. Attach your shelf support onto the brick. Fit your mantel onto the mantel support. Style your finished mantel!.
How much overhang should a mantle have?
A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that. Do not guess when sizing the mantel to a room, or the mantel could wind up being too long or too short.
How high should a fireplace mantel be off the ground?
Mantel Height: We recommend installing the mantel 4.5′ from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
How high does mantel need to be above fireplace?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
Can you put a TV on a mantel?
The short answer is – yes. However, to ensure your television isn’t damaged from the heat, care must be taken to ensure heat generated by the fireplace is redirected away from television. There are several ways to do this, such as installing a proper mantel and building an alcove for the television.
How is a fireplace mantel attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. In this case any screws or nails may be located on top or beneath the mantel.
Can you set TV on mantle?
Ideally, televisions should be set at the eye level of seated viewers, but unless you have a very low mantel, this placement probably won’t be possible above a fireplace. Sit in your favorite chair and stare at the template for a while; if you experience neck strain, consider placing the TV somewhere else.
How are mantels attached to the wall?
Since neither option is very sturdy, we recommend you attach the mantel to a cleat—a simple piece of lumber securely fastened to the wall. One cleat runs horizontally under the mantel shelf, and the others run vertically inside the legs (most mantels are hollow in back).
