Table of Contents
A thickness planer (also known in the UK and Australia as a thicknesser or in North America as a planer) is a woodworking machine to trim boards to a consistent thickness throughout their length and flat on both surfaces.
What is the purpose of a wood planer?
A planer is used to shave wood from the surface of boards. Imagine scraping a knife across the top of a block of butter. That’s pretty much the action with a planer – though you might need a bit more muscle power! They’re used to make a rough surface flat and smooth, or to reduce its thickness.
Do I need a planer for woodworking?
Most woodworkers know that you need both a planer and a jointer to get the most out of rough lumber (at least for power tool users). If you run the other rough face on the jointer, you can certainly make it flat but you won’t make it parallel to the first face.
What do you use a planer for?
Woodworking jointers and planers are used to mill wood so they can be used to build furniture and other projects to correct dimensions. If your workshop doesn’t have a jointer to square up an edge or your wood piece is too large to fit through, you can use your planer to flatten both pieces of wood.
When would you use a planer tool?
With the proper skill and accessories, you can also use power planers for finesse work like beveling door edges, scribing cabinets and countertops, and shaping and tapering wood trim (Photos 3 – 5).
Is a planer a sander?
Whereas sanders are used to alter the finish of wood, a wood planer is used to even out wood to an exact thickness. Planers produce boards of even thickness.
Does a planer make wood smooth?
Smooth rough-cut wood stock with a planer. The planer is a tool for woodworkers who require large quantities of planed stock and who elect to buy it rough cut. It, too, cuts with a cutterhead, but the planer smooths the face of much wider stock.
Will a planer flatten a board?
In order to flatten a warped, twisted, or cupped board, a common approach is to first use a jointer to create one perfectly flat face. Then you run the board through a thickness planer with the flat face downward, and the planer makes the top face parallel to the bottom.
Can I use a table saw instead of a planer?
When surface or thickness planing wood for a project, the end product needs to be as clean and straight as possible. When working with wood, it has a tendency to move, warp, and bend as the tension is released from the material.
What is a planer used for in fishing?
Planer boards are devices that attach to fishing lines and take those lines, and the lures on those lines, out away from the boat. Boards allow anglers to spread lines across a wide area, which is an advantage especially when trolling lures over flats or lake basins where fish are often scattered.
Do I need a hand planer?
If you’re a woodworker who needs to straighten or smooth wood, a hand plane is a must for your tool set. Whether shaving down a wood door that’s sticking or smoothing the surface of a wavy board, no tool works quite as well as a hand plane.
Which machine is best used in planing wood?
Top 9 Wood Planer Machines in India Product (Best Brands) Average User Rating Bosch GHO 6500 Professional Planer 4.3/5 Digital Craft Wood Planer 600W Machine 4.2/5 Janvitha JEP1010 750W ABS Wood Electric Planer 3.4/5 iBELL 82-58, 580W Electric Hand Planer 4.1/5.
Will a planer remove paint?
Can a planer be used to remove paint? A planer can be used to remove paint. Although running it gently along the surface may not do the trick, you can achieve this effect with a deeper blade setting. You need to set your blades, so they dig deep enough to get under the layer or layers of paint you wish to remove.
Do I need a planer or sander?
Answer from Lee Grindinger: “A planer will remove stock much, much more quickly than a drum sander. A sander is built to sand. For surfacing you’d be using a very coarse grit and this means several grit changes to get to the smoothness you’re looking for in a drum sander.
Do you have to sand after using a planer?
If you are happy with the surface as it is now, there is no need to now sand it. To determine if the surface is ready for the color coat, wet a clean rag with alcohol or lacquer thinner. Wipe and wet the surface. This will highlight any sanding miscues or other surface blemishes.
How much does a planer take off?
Most planers remove a maximum of 3 mm per pass. If a narrow piece of lumber is being planed, the maximum amount may be removed. A piece that it at the maximum width of the planer may cause the motor to overheat and the cutter to stall.
Does a planer cut both sides?
With one flat face, you can now put the flat face down on your planer bed and pass it through to flatten the opposite face. Since you already have one flat face to index off of, your planer will cut the opposing face parallel to the flat face.
Does a planer remove cupping?
It is difficult to flatten a cupped board with a thickness planer because the downward pressure of the feed rolls will press out much of the cup, thereby not allowing the planer knives to flatten the board.
What’s the difference between a planer and a jointer?
A jointer creates a flat surface on wood, and yes, it can be used to correct bow and warp on one side of a board at a time. “A planer is a thicknesser. It takes a thick board and makes it thinner. At the same time, the planer will also make the rough side both smooth, and parallel to the other side.
Can you plane wood with a router?
If you have a beautiful, thick piece of timber that is too wide to use your Planer, you can get the face of the wood parallel and smooth using a router and a jig. A router is a simple and accurate way to plane wood while saving time and energy.
