Table of Contents
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you secure a wood mantel to Brick?
Modern Timber Craft says to insert a lag bolt into each sleeve and tighten it with a screwdriver or drill until it is secure. Then, use an angle grinder to remove the head of each bolt. If a different set of hardware is provided with your mantel, anchor the hardware to the brick using screws in the inserted sleeves.
How do you attach a fireplace mantel to the wall?
Mount the fireplace mantel. Push the mantel against the wall, using the drawn lines. The mantel should fit around the cleats, which hold it in position. Then use the drill to insert screws through the mantel and into the cleats. These screws should be roughly 16 inches apart.
What is the best way to drill into brick?
Begin by drilling a pilot hole using a small masonry bit. Then, attach the larger bit and drill again to make a bigger hole. Make sure the drill is perpendicular to the brick wall. Drilling through brick and mortar places stress on the drill, causing it to heat up.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How do you install a floating beam mantel?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do you hang a heavy mantle?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
What holds up a fireplace mantel?
Since neither option is very sturdy, we recommend you attach the mantel to a cleat—a simple piece of lumber securely fastened to the wall. One cleat runs horizontally under the mantel shelf, and the others run vertically inside the legs (most mantels are hollow in back).
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
Can you drill into stone fireplace?
All in all, drilling to masonry is completely achievable for a do it yourself-er. I definitely think drilling into brick/stone is easier than concrete but you can do it!Sep 28, 2021.
How do you anchor wood into brick?
Hammer the nails into the wood wherein it should barely protrude. You can use a heavy hammer for the job. You can apply some glue on the wood surface as an extra adhesion. Hold the wood in place and use a heavy hammer so the nails are driven into the brick.
How do you attach wood to brick without drilling?
The best way to attach wood to brick without drilling is to use a brick wall hook. These hooks are designed for brick walls, even slightly curved ones. They are removable, adhesive-free, and strong (holds up to 25 lbs). You can install them in seconds and most importantly: no holes to drill.
What does a drill bit for brick look like?
Masonry Drill Bits – Best for Stone and Brickwork Masonry bits look like larger twist drills with a slightly tighter corkscrew shape. You can identify them thanks to their wide arrow-shaped heads. They’re commonly used in hammer drills to grind masonry down as they cut through it.
Why can’t I drill into brick?
However, if you have old, fragile brick and you’re mounting a heavy object that requires deep holes and expansion-style anchors, drilling into the brick may not be the best choice. Deep holes weaken the brick and expansion anchors can create enough circular stress to crack the brick.
How thick should your mantle be?
A depth of 7 inches is ideal for most mantels, as it allows plenty of room to accommodate decorative objects. Keep in mind that the top and the sides of the mantel should be the same depth.
How high above a fireplace should a mantle be?
Mantel Height: We recommend installing the mantel 4.5′ from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
How high should a wood mantle be above the fireplace?
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
How do you build a fireplace mantel beam?
Instructions: Step 1: Cut 45• miter cuts at each end on two of your 1x8x6 boards. Step 2: Glue and nail the boards in place. Step 3: Measure and cut your end caps to size. Step 4: Distress your beam. Step 5: Fill the wood seam with wood putty. Step 6: Sand your beam.
