Table of Contents
How do you attach a mantel to the wall?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How do you hang a heavy mantle on drywall?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
How is my mantle attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How do you anchor a heavy mantle?
The mantel needs to anchor to the studs in the wall above the fireplace. Drive 1/2- or 3/4-inch rebar rods or lag screws into pilot holes drilled into the studs. For best support, drive them all the way through the stud. Place one rod or screw in each stud behind the mantel.
How heavy can a mantle be?
The maximum weight for all 60INCH MANTELS is 150 lbs. The maximum load for all 72 inch mantels is 180 lbs.
How do you attach a mantel to an existing fireplace?
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you fill a gap between a wall and a fireplace?
You can fix gaps between brick fireplaces and sheetrock. Measure the size of the gap between the drywall and the brick. Use 1/4-round trim molding that’s wide enough to cover the space of the gap. Place a tube of acrylic caulk into a caulking gun. Replace the caulk in the caulk gun with a tube of construction adhesive.
How do wall mounted fireplaces work?
A fireplace that’s designed to go into a wall or cabinet, will expel the heat out a vent in the front of the unit. A fireplace that’s designed for surface mounting will expel heat out the top or the bottom of the unit.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How far above a fireplace should a TV be mounted?
Above Fireplace Mounting The rule of thumb is, if your mantel is less than four feet from the floor, you should mount your TV about 12 inches above it. This rule applies to a fireplace without a mantel as well.
How far does a mantel need to be above a fireplace?
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.
How deep should a fireplace be?
The standard size of a fireplace is anywhere from 2 – 3 feet wide, 24 – 29 inches high, and always about 16 inches deep. Of course, the opening could vary depending on your style and design ideas, as well as where you are locating the fireplace.
How high should a mantle be above the floor?
Mantel Height: We recommend installing the mantel 4.5′ from the floor. This allows room for stockings during the holidays. Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box.
How much weight can a French cleat hold?
Well, surprisingly french cleats are strong. They can hold 20 pounds to 200 pounds. However, the weight can decrease and increase depending on different factors. Plus putting studs in drywall changes the weight-holding capacity of a cleat.
How do I attach shelves to corbel?
Drill three pilot holes, spaced 4″ to 5″ apart, and insert the anchors in the wall, then screw the shelf to the wall through the backing piece. (If you don’t want a backing piece on your shelf, you can attach the corbels to the wall first, then screw the shelf on once the corbels are in place.
What is a fireplace corbel?
A corbel is a structural piece of stone, wood or metal protruding from a wall to carry weight. A chimney corbel, in very simple terms, is a brick bump-out. You will find essential chimney corbelling in the smoke chamber or on a multi-flue outside wall chimney, this area is also known as a shoulder.
Do wall mounted electric fireplaces put out heat?
The vast majority of electric fireplaces give off heat in the form of a heating element that is usually located at the top the unit. Fans blow hot air from out of the electric fireplace to provide heat to the room.
