Table of Contents
MEASURE YOUR SPACE Begin by measuring the width of your vanity. Typically, your medicine cabinet should be narrower or the same width as the vanity. To determine the height, measure the distance between your lights and faucet. Choose a size that provides clearance above the faucet and below the lights.
How do you size a medicine cabinet?
When choosing the right medicine cabinet size, consider the width and height of your sink or vanity. For smaller sinks and vanities 18 to 24 inches wide, a 15 x 24-inch medicine cabinet is a good fit. For compact vanities 30 to 36 inches wide, a 20 x 24-inch medicine cabinet is a good fit.
What is a standard medicine cabinet size?
Builders Grade Medicine Cabinet Size: 22″ H x 16″ W x 4.25″ D, Mount: Surface Mounted.
What is the rough opening for a medicine cabinet?
Cabinet may be inverted for right- or left-hand door swing. Provide framed rough wall opening 14″ wide x 23-5/8″ high (355 x 600mm). Minimum recessed depth required from finish face of wall is 3-1/2″ (89mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
What is the standard height for a medicine cabinet?
Standard Height The installation height for medicine cabinets is generally accepted to be 64 inches from the floor to the mirror’s center, according to Broan.
Should a medicine cabinet be as wide as the vanity?
A single medicine cabinet’s width should be equal to or less than that of the sink or vanity over which it sits. It should be centered over the vanity or sink. Keep it at eye level and arm’s length when standing in front of the sink.
How much space should be between vanity and medicine cabinet?
They should be between 12 and 18 inches apart. If your medicine cabinet is wider than the space between your studs, you can still use it, but you’ll need a more custom installation.
Do medicine cabinets go into the wall?
A surface mount medicine cabinet attaches directly to a wall. You can avoid moving any plumbing or electrical lines that may be in the wall behind it. A recessed mount medicine cabinet is installed in a wall.
How can I update my medicine cabinet without replacing it?
Medicine Cabinet Makeover: how to update a medicine cabinet without replacing it Step 1: Remove the old light. Step 2: Build up the box. Step 3: Add the crown moulding to the top. Step 4: Add the new lighting. Step 5: Prime and paint.
How high should cabinets be above toilet?
A bathroom cabinet should be hung approximately 2-feet or 24-inches above the top of the bathroom toilet.
What is the average cost to install a medicine cabinet?
Cost to Install a Bathroom Medicine Cabinet Bathroom Medicine Cabinet Cost Zip Code Basic Best Bathroom Medicine Cabinet – Installation Cost $65.00 – $85.00 $145.00 – $160.00 Bathroom Medicine Cabinet – Total $125.00 – $155.00 $305.00 – $410.00 Bathroom Medicine Cabinet – Total Average Cost per unit $140.00 $357.50.
Which way should medicine cabinet open?
If you want the hinge on the left side, the door opens from the right and swings out towards the left. If you want it to go the other way, flip the cabinet around 180 degrees and the hinges will be on the right, the door will open from the left side and it will swing open towards the right.
How high above the medicine cabinet should the light be?
Over-Mirror Lighting Height Install the light above the medicine cabinet or mirror at a height of about 75 to 80 inches from the floor. You can also use the vanity as a guide. Place the light about 40 inches above the top of your vanity.
How high should mirror be above sink?
THE MIRROR Here are three easy tricks to determine the optimal mirror height: Hang the mirror 5” to 10” inches above the sink. Hang the mirror a few inches above the highest part of the faucet. Center the mirror in between the vanity lighting and the sink.
How do you measure a bathroom medicine cabinet?
To get an accurate measurement, remove the cabinet door, then unscrew the cabinet from the framing. Measure the height and width of the cavity, as well as the available depth.
How do you fix a wall after removing a medicine cabinet?
How to Fix a Hole From a Medicine Cabinet Step 1: Cut the Top and Bottom of the Hole. Step 2: Cut Two Planks. Step 3: Cut the Drywall. Step 4: Apply Adhesive and Screw in the Drywall. Step 5: Add Drywall Joint Compound. Step 6: Sand and Add More Layers. Step 7: Sand and Paint.
Can I replace the mirror on my medicine cabinet?
Glass is fragile, so any number of accidents could crack or break your bathroom cabinet mirror. But there’s no need to replace the entire fixture if you can just substitute a new piece of glass for the old one. It’s an easy project for most DIYers and it could save you a little time and effort in the long run.
Do medicine cabinets add value?
2. Recessed medicine cabinet = built-in storage – This one is a bit of a technicality but we’ll go with it. Built-in storage is a value-add for your home value. So, when it’s time to sell your home, your medicine cabinet could bump your house value up a small amount (okay, really small, but any gain is a good gain.
How do you hang a medicine cabinet in the wall?
Table of Contents Step 1: Locate Pre-Drilled Nailing Strips. Step 2: Find Studs Behind the Drywall. Step 3: Mark the Top of the Cabinet. Step 4: Drill Mounting Holes. Step 5: Drill Pilot Hole. Step 6: Use Anchors or Toggle Bolts if Needed. Step 7: Secure One Side of the Cabinet. Step 8: Level the Top and Secure the Cabinet.
Can you put a recessed medicine cabinet in a load bearing wall?
Installing a medicine cabinet in a load-bearing wall is doable, but if it’s not done properly it could lead to a sagging floor/ceiling. You may want to call a pro. However, if your cabinet is narrow enough to fit between two studs, then load bearing shouldn’t be an issue.
Can you paint a wood medicine cabinet?
If your medicine cabinet is a wooden built-in, you can repaint it to give it a new look. To paint the cabinet, remove any removable shelves or doors and set aside any hardware. When all non-painted areas are taped off, sand all the painted areas with high-grit sandpaper to prep the surface.
How do you replace a medicine cabinet with shelves?
Step 1 – Take Measurements. Step 2 – Sketch the Shelves on Your Plywood. Step 3 – Cut the Shelves. Step 4 – Install Your Shelves. Step 1 – Remove Old Shelf. Step 2 – Remove Old Shelf Supports. Step 3 – Install New Supports. Step 4 – Install Your New Shelves.
What do you put in cabinet above toilet?
Take advantage of the space between the walls over a toilet that sits in a nook. Wall-to-tall floating shelves will make an otherwise awkward space look intentional, and they will also provide additional storage. Place baskets, folded towels, tissues, decorative items, and extra rolls of toilet paper on the shelves.
What is comfort height toilet?
Traditional toilets are 15 inches high. Comfort height toilets (or “right height” toilets) have higher seats than traditional toilets, usually between 17 inches and 19 inches. Comfort height toilets are becoming a popular option for many households.
Can you hang a cabinet on one stud?
One stud should be fine, using a high and a low screw, plus fastening the cabinet to the adjacent ones.
