Table of Contents
Inside-Mounted Horizontal Blinds Measure exact window width at top, middle, and bottom. Use the narrowest width. Do not make any deductions – provide the exact measurements of the narrowest width. Measure exact window height at left, middle, and right side. Use longest height.
How much space is needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
How do you measure for replacement blinds?
How Do You Measure your Blinds? Measure your window opening width at the top, middle, and bottom. Also measure the height at the left, right, and center. Write the narrowest width and tallest height down, rounded to the nearest 1/8 inch. Write down your measurements as width X height.
How much smaller should blinds be than the window for inside mount?
Inside-Mounted Vertical Blinds Window should have a minimum recessed space of 2 3/8″ for inside mount. Measure the width of the window from the top of the opening to the sill in 3 places. Use the smallest dimension for the blind width. The factory will automatically deduct up to 1/4″ – 1/2″.
What width do blinds come in?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How do you know what size blind slats to buy?
Measure your window’s height and width, as well as depth, and pair it with proportionate blinds. Easily enough, small slats are ideal for narrow window frames or tiny windows, while bigger spaces generally beg for larger slats.
How do you measure for replacement mini blinds?
Measure the width of the inside edge of the window frame from left to right in three places – the top, middle, and the bottom. Write down the smallest of the three widths down to the nearest 1/8”. If you have a 1/16” or 1/32” increment when measuring, round down to the nearest 1/8”.
How do you measure for replacement vertical blinds?
If you have an existing slat that you are looking to replace, then you can measure this. Remove the bottom weight and measure the total hem to hem drop of the fabric slat from the very top to the very bottom, ensure the fabric is flat with no folds or creases. This measurement is the drop size you will order.
Does the width of a roller blind include the fittings?
For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How much should I subtract for window blinds?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame.
How much shorter should blinds be than opening?
To minimize light leakage the blind should overlap the window opening by at least 1 1/2″ on each side for a total of 3″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″.
How much longer should your blinds be than your window?
Lastly, to make sure of the light control as well as privacy, the blinds should be at least three inches broader than the window casing, so that it overlaps the window by 1 and a half inches on each side.
Do you need a drill to install blinds?
Hanging window blinds is super easy, and it doesn’t even require a drill. Having a drill will make it easier, but you can do everything with a screwdriver. And if you need to make a pilot hole to get the screw started, simply tap the end of a nail into the wall with a hammer and then pull the nail back out.
Are blinds measured width by height?
One of the most important steps is to measure both the height and width in 3 places – top, middle, and bottom. For Roller Shades, Solar Shades, Sheer Shades, or Vertical Blinds use the measurement from the top of the window. For all other styles, use the narrowest width measurement of the top, middle and bottom.
What sizes do ready made blinds come in?
Standard Sizes for Blinds 36 inches. 48 inches. 60 inches. 72 inches.
What are the different sizes of blinds?
The standard sizes of window blinds ought to match these and can be found in most stores: Picture windows: 1–8 feet high, 2–8 feet wide. Double-hung windows: 36–72 inches high, 24–48 inches wide. Sliders: 24–60 inches high, 36–84 inches wide.
How far do perfect fit blinds stick out?
4) Do your windows have 25mm clearance? ‘Clearance’ refers to the empty space around the window, which needs to be free of obstructions. Perfect Fit blinds are set flush to your window, and the 25mm measurement ensures there is enough space for them to be installed.
What is blind slat width?
But the most common slat size is 2 inches, and that’s the size you’ll find the majority of blinds and shades. Keep in mind that you may have a medium sized window but with a shallow or narrow windowsill. 2” blinds may not fit. But you always have the option to choose a smaller slat size or simply use an outside mount.
How wide can horizontal blinds be?
These blinds can be anywhere from 70-96” in width, however for sizes larger than that you’ll have to go for 2 or 3 blinds on 1 headrail. They might be a replica of wooden window treatments but have entered the popular space because of the multitude of benefits they have on offer.
