Table of Contents
Can I install a toilet myself?
All you need are a few hours, a helper and the right tools and toilet parts for the job. Before you begin learning how to install a toilet, choose your new toilet, and if you aren’t replacing an existing toilet, make sure you have plumbing ready for the new installation.
How much should it cost to have a new toilet installed?
On average, a standard toilet installation costs between $120 and $230 with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $100 to $200 for a total toilet replacement cost of $221 to $427.
Is changing out a toilet easy?
Replacing a toilet is a major project, but it is not as difficult as might be imagined. The hardest tasks usually are selecting a new toilet and removing the old one. Then remove the tank cover, flush the toilet and sponge the tank dry. Use a plumber`s plunger to force as much water as possible out of the bowl.
How long after a new toilet is installed can you use it?
Once the toilet is installed, you should wait at least 6 to 12 hours to ensure that all the work won’t go to waste. No caulk or grout used – In this case, you don’t have to wait as there is nothing that needs to dry.
How often should a toilet be replaced?
Typically, toilets need replacement after 25 years of use so this can be considered the average toilet lifespan. Some would argue that the porcelain toilet itself has a much longer, and even unlimited, lifespan and that it’s only the components inside that need repairs and replacements.
How long does it take for a plumber to install a toilet?
Replacing a toilet is a simple and straightforward job, so you should be able to remove the old toilet and install the new one in about two to three hours. However, if you don’t have a lot of DIY experience, you might want to add an hour or two to that timeframe.
Can you have two toilets on the same line?
Most houses have more than one toilet, and if they are on the same side of the house, their waste lines can usually tie into the same stack. If they are on opposite sides, however, each may need its own stack. Since the stacks must be vented, this would mean two vent openings on the roof.
Do you have to replace the wax ring when you remove a toilet?
Whenever you remove a toilet for any reason, you will need to replace the wax ring seal between the toilet and the toilet flange (sometimes called a closet flange) attached to the floor. A wax seal is used because it resists mold and bacteria and retains its sealing ability after years of use.
Do you need a plumber to install a toilet?
Yes. A toilet is part of your plumbing system, and needs to be installed by a licensed and qualified plumber. If you are undertaking a complete bathroom renovation and replacing your toilet as part of this job, your bathroom renovator needs to be appropriately licensed and use a plumber for this job.
What tools are needed to replace a toilet?
Tools slip-joint pliers. open-ended wrench. screwdriver. sponge. adjustable wrench. rag. needlenose pliers. gloves.
What is the last step when installing a toilet?
The final step is to seal around the base of the toilet with silicone caulk. It’s wise to use your toilet for a day or two before applying the silicone. You want to be extra sure there are no leaks from the base.
Do you have to caulk around a toilet?
Caulk keeps your toilet secure the floor, and avoids any chance of injury or toilet malfunctioning. It’s actually required by the International Plumbing Code to caulk a toilet to the floor, and now knowing the reasoning behind it, why would you not want to?Oct 4, 2021.
Do new toilets come with bolts?
Items You May Need to Install Your New Toilet An assortment of stainless steel and brass toilet bolt kits with extra washers and nuts. High-quality tank-to-bowl bolts. Most kits come with three bolts and accessories.
Should you tile under a toilet?
The bathroom fitters are unanimous—if you’re looking for a high quality finish, with a better seal against water damage, then always tile the floor first. The floor will be sealed a lot better with the tiles being laid under the toilet. 2. It is also easier to do this rather than trying to cut tiles around the toilet.
What is better wax ring or rubber?
Using a wax-free seal makes clean up easier and there’s less room for error. If you need to remove the toilet base with a wax ring, you’ll need to purchase another ring to reinstall the toilet. When you use a wax-free seal, it’s reusable as long as it’s in good condition.
Do all toilets fit the same?
For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. If the rough-in measurement is not between 11 inches and 13 inches, a standard toilet will not fit the space, and you will need to look for a toilet designed for that specific rough-in distance.
Is it bad to put bleach in the toilet?
Yes, bleach can damage toilet bowls if not diluted with water. While generally safe with porcelain and fireclay, bleach can oxidize the iron of an enamel toilet to firm rust stains. Even worse, a poisonous gas is formed when bleach reacts with ammonia.
Should I keep old toilet?
For most toilets, a 20-year lifespan is the outer limit. A toilet may continue to work after this, but it will be at a higher risk of starting to leak and suffering from numerous clogs and other repair issues. Get ahead of the problem and replace a toilet that’s 20 years or older.
What toilet brand is best?
Our Top 10 Toilet Reviews 1 – KOHLER Santa Rosa Toilet. 2 – American Standard Champion 4. 3 – Saniflo SANICOMPACT 48 Toilet. 4 – Toto Neorest Dual Flush Toilet. 5 – Kohler Wellworth Toilet. 6 – Toto Washlet with Integrated Toilet. 7 – Niagara Stealth Toilet. 8 – American Standard H2Option Toilet.
