Table of Contents
How deep should a closet be framed?
The standard minimum depth for a reach-in closet is 24 inches, but a closet intended to store coats or other bulky hanging items may need to be as deep as 28 inches. A closet less than 22 inches deep isn’t deep enough to allow hanging clothes.
Do closets usually have studs?
Closet shelves are usually anchored to the wall where the mounting screws can grab wall studs. If your walls are masonry, you likely don’t have studs at all. You’ll need the proper materials and methods to build a stud-free closet shelf.
How far apart are studs in closets?
Studs are usually placed either 16 or 24 inches apart. However, it’s always best to use a stud finder.
How do I add a space to my closet?
Instead of cutting your wardrobe in half, use these 19 small closet ideas to create twice as much space as you had before. Get a Clothing Rack. Hide Items Behind Glass Doors. Add Storage Under Clothes. Re-Organize Seasonally. Utilize Modular Shelving. Install Task Lighting. Install Sliding Doors.
What is the minimum width for a walk-in closet?
Walk-in closets should be a minimum of 4 feet wide by 4 feet deep. With these minimum dimensions, the closet will accommodate shelves and hanging space on one side wall and the back wall.
What is the standard bedroom closet size?
A typical closet is approximately 24-inches deep. A walk-in closet should be at least 36- to 48-inches deep. The width of the closet ideally is half the width of the room, if not more. A standard 12-by-12 bedroom would ideally have a closet 6-feet wide by 48-inches deep.
Is it hard to build a closet?
It’s not difficult to add a closet, but doing so will probably be more costly than reorganizing an existing one. So exhaust all other storage options before taking the plunge.
How much does it cost to frame a closet?
The average cost to build a closet in a bedroom is about $750 to $1,000 for a reach-in, and $2,000 to $2,500 for a walk-in. Prices depend on the size and whether or not the framing is already in place.
Does adding a closet to a room increase home value?
The short answer is yes, a custom closet can help with the resale value of your home with a higher return on your initial investment than other renovations. Adding a customized wardrobe to an empty spare room can make it feel like an extra bedroom, increasing the home’s value.
What are standard closet dimensions?
A typical reach-in closet is approximately 6-feet long, 8-feet high, 24-inches deep with an 80-inch high door opening. Reach-in closets are very practical for a single occupant. They allow for easy viewing and access to all contents. Accessories and baskets work well in them.
What to do if you have no closet?
10 ways to store clothes without a closet Buy or DIY a clothing rack (or a few) Hang your clothes and curtain them off. Use a utility shelf or bookshelf and add storage baskets. Turn a wall or corner into a built-in closet. Stack up some wooden crates or boxes. Hang unique wall hooks. Make room for a wardrobe.
How do you build a closet in a room with a slanted ceiling?
Working With Sloped Ceilings in Your Closet Stagger the Heights of Your Closet Organizers to Match the Slope of the Ceiling. Start Your Closet and Storage Sections Below the Angle. Allow More Depth to Your Closet Sections & Build Away from the Wall. Learn how to install a closet rod on an angled wall.
How do you cut shiplap for angled walls?
There’s a simple tool you can use to get your angles perfect. Just line up a carpenters sliding bevel to the trim edge and then move it over to your board and trace the exact angle on to your board. I love little tools like this one that make life so much easier!Apr 20, 2017.
Is there a stud in every corner?
Studs exist to hold up drywall on interior walls and wood sheathing on exterior walls. This means you will always find a stud, header, or footer on the top, bottom, or corners of walls. Most electrical boxes for switches or outlets are attached to a stud on one side. There are studs on either side of a window.
How do you attach wood to drywall without studs?
One of the best methods for attaching wood to drywall is to drive screws through the wood and drywall, securing the wood to the studs behind the drywall. If you are securing wood to drywall where there are no studs, use a strong construction adhesive. Only use nails if you are securing trim and baseboards.
Can I put up a shelf without a stud?
Fortunately, there are several different options you can use to support a shelf. The most common one is a drywall anchor, which is like a plastic screw that plugs into drywall. If you’re working with plaster or need something that bears more weight, try using a molly bolt. For very heavy shelves, pick toggle bolts.
How deep are studs behind drywall?
16 Inches On-Center.
What is the width between studs?
Studs are boards that function as framing elements in your home, supporting the walls. You may wonder, how far apart are studs in my home? They’re always spaced either 16 or 24 inches on-center (measured from center to center) along the wall and run between the floor and ceiling.
Why can’t I find studs in my wall?
Baseboards should be attached to studs and if the spacing of nails is about 16 inches this might be the case. Spot the nails with your eye then knock on the wall directly above the nail location. If the you hear a higher pitch sound above the nails then you’ve likely found a stud. This is a simple way to find studs.
Does a closet need a header?
As you might have guessed, even a closet doorway needs a header. No matter how light the door, window, shutter — or even if an opening is empty — you must frame it with king studs, jack studs, cripples (one every 16 inches) and a header.
How do I extend the depth of my closet?
Move the walls, as necessary, to enlarge the closet to the desired size. Plumb each end of a wall exactly vertical with a 4-foot level. Attach the stud at the end of a wall to the corresponding adjacent wall with 16-penny framing nails at 12-inch intervals from top to bottom.
