Table of Contents
What is the purpose of a window apron?
An apron is decorative trim installed against the wall immediately beneath the stool of a window. It accentuates the look of the window inside the house; almost a like a piece of moulding.
What is a window sill apron?
The window sill refers to the bottom or base of the window opening. The sill is made up of two parts, the shelf is the base or bottom of the window and the apron is the decorative trim underneath the shelf.
What are the parts of a window called?
Exterior Parts of a Double-Hung Window Frame. A window frame is the framework that surrounds and supports the entire window system. Head. The head is the main horizontal part forming the top of the window frame. Jambs. Jambs are the main vertical parts forming the sides of a window frame. Sill. Jambliner.
What is the thing above a window called?
In architecture, a transom is a transverse horizontal structural beam or bar, or a crosspiece separating a door from a window above it. This contrasts with a mullion, a vertical structural member. Transom or transom window is also the customary U.S. word used for a transom light, the window over this crosspiece.
What are window tracks?
Window tracks are the raceways in which the window slides up and down. Clean the window tracks first (because the windowsills will get dirty while you’re working on the tracks). Vacuum the tracks, using a crevice tool to get into the narrow areas. You’ll find dirt, dead bugs and dried leaves in there.
What angle do you cut a window apron?
Finish the apron Start by cutting a 45-degree miter on each end. Mark for the long point of the miters by resting the apron on the stool and making marks where the outside edges of the casings intersect the apron material.
Does a window need a stool?
The window stool is the first piece of trim to be installed when trimming out a window. All of the other window trim pieces abut the stool. The stool is a landing place for the jamb casings above, and the apron casing fits against the underside of the stool. The stool should always be installed level.
What is apron Moulding?
Apron Moulding A piece of horizontal sash or window trim applied against the wall immediately below the window stool; the apron serves to conceal the. joint made by the sash or window frame sill and the interior wall surface.
How far does window stool stick out?
How far should a window sill stick out from a wall? The sill should overhang from the front edge of the wall or window frame at least 3/4 inch. You can make it hang over more if you’d like. Keep in mind the sill should fit the scale of the window and reflect the style too.
What is window explain the types and anatomy of window?
A window consists of a frame area and body area that let the user view and interact with content in an app. A window can appear onscreen alongside other windows, or it can fill the entire screen (see Full-Screen Mode). Users can also click and drag the edges of the window to resize it, if the window supports resizing.
What is the wood at the bottom of a window called?
Sill. Sometimes referred to as the “stool” of the window, the sill is the main horizontal part that forms the bottom of the window frame.
How much does it cost to replace a window sill?
Window Sill Replacement Cost The total cost to replace a window sill falls between $190 and $300 for both parts and labor. The sill is the ledge that juts out at the bottom of the window. You should replace this part when it feels loose or starts to rot.
How easy is it to replace a window sill?
It’s easy to replace a sash window sill, even if it is extremely rotten. You simply cut the rotten defective sash window sill out and then install a new one in its place. Once installed it will need to be primed, undercoated and then painted to match the rest of the window.
What is a window liner?
A jamb liner is a strip which goes on the inside of a window frame to provide a snug fit for the window. A jamb liner is a strip which goes on the inside of a window frame to provide a snug fit for the window. Jamb liners can be built into a window frame, or they can be added or replaced later.
What is transom and mullion?
Transomnoun. A horizontal crossbar in a window, over a door, or between a door and a window above it. Transom is the horizontal, as mullion is the vertical, bar across an opening.
Why Should You clean window tracks?
Clear the grime from your window tracks quickly with this helpful how-to. Dirty window tracks can spoil even the sunniest views. Whether you leave your windows open or closed, the tracks inevitably become a catchall for dust, insect corpses, mildew, and even mold.
How do you clean window tracks?
Steps to follow Vacuum. Vacuum around the tracks to remove any loose debris. Add bi-carb. With the tracks free of loose particles, you should be left with only stains and grime. Spray with vinegar. Fill a spray bottle with vinegar and spray the bi-carb coating. Scrub with a brush. Repeat if needed.
How do you clean window crevices?
Wrap a disposable wipe around a plastic putty knife and angle knife to clean the crevices and corners. Wipe the track dry with a clean microfiber cloth. Repeat as necessary until all of the dirt is removed.
