Table of Contents
Can I redo my own hardwood floors?
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
What is the cheapest way to refinish hardwood floors?
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
How much does it cost to redo wood floors?
According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor. Roughly 80 percent of the cost to refinish hardwood floors comes from labor.
Is it cheaper to refinish or replace hardwood floors?
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.
Is redoing hardwood floors hard?
The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. Buffing hardwood floors can be tricky, so if you’ve never used a buffer before, practice in the middle of the room until you get a feel for how to maneuver it.
What is the best time of year to refinish hardwood floors?
If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it’s often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.
Can you refinish a wood floor without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish. The former is a proven floor restoration method, while the latter is the “Hail Mary” pass of floor care.
How can I restore my hardwood floors without sanding?
3 Approaches to Refinishing Hardwood Floors Without Sanding Use a store-bought chemical abrasion kit. Buff and recoat floors with polyurethane. Use a revitalizer.
How do you refinish hardwood floors yourself?
Prepare the Floor for Refinishing. Take the following steps before wood floor refinishing. Pull Up the Shoe Base Moulding. Rough-Sand the Floor. Sand the Edges and Corners. Screen Sand the Floor. Remove All Dust. Apply the Wood Stain. Apply the Finish.
Can I sand my floors myself?
Sanding wood floors is a time consuming but relatively easy procedure. Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it.
Can I change the color of my hardwood floors?
When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.
What is the difference between refinishing and resurfacing wood floors?
What’s the Difference? Refinishing involves sanding down the uppermost layer of the floor and applying fresh stain and lacquer over the existing wood. Resurfacing your floor involves more than just putting a layer of polish on top.
How do you tell if your wood floors can be refinished?
Water Test. Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.
Can old hardwood floors be matched?
Although a professional can recommend a flooring replacement that will closely match your current floors, for a perfect match, it’s best to strip your current hardwood floors and refinish both, or stain the new boards to exactly match the existing floors.
How do you salvage an old wood floor?
Almost all old floors can be salvaged and refinished by skilled contractors. Termite-damaged planks, insect-infested boards or delaminated strips can be replaced if there aren’t too many. Squeaky floors can be tightened and quieted, at least temporarily, with nails or dry lubricant. Holes can be plugged.
Can I sand wood floors with a hand sander?
The palm sander is definitely the most common tool for sanding a wooden floor by hand. Use it with a coarser sandpaper grit for a lot of efficiency and quick results. Palm sanders also have a square edge, which means you can sand right into the corners of the floor.
Does refinishing hardwood floors remove scratches?
Refinishing hardwood floors is the right solution. Hardwood floor refinishing can help you get rid of those unsightly scratches and marks. But as long as the damage is shallow—in the coating and not in the wood itself—you can renew the hardwood floor by adding a new coat of polyurethane right over the old finish.
What grit sandpaper do you use to sand hardwood floors?
Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.
Can you sleep in house after polyurethane?
We recommend a minimum of 2 days of socks-only traffic for floors finished with oil polyurethane. The house is not inhabitable for a minimum of 2 days after the job is completed, and better to stay out for at least 5 as the fumes/off-gassing is not advisable to breathe in, even if there are other rooms to sleep in.
How long before you can put furniture on refinished floors?
Wait 48 to 72 hours after the hardwood has been refinished/ finished before “PLACING” furniture back in its place. Keep a steady temperature and humidity within your home. Dramatic swings in temperature will cause hardwood to shrink or to cup. Sweep/dust and mop often.
