Table of Contents
How do you make a breakfast counter?
Steps: Use a utility knife to cut along the corners of the wall and the ceiling. Make an inspection hole to see what wiring is behind the wall. Use a hammer to remove drywall all the way to the floor. Frame in the breakfast bar with 2x4s. Build the base for the cabinets with 2x4s. Set the cabinets in place on the base.
How wide is a breakfast bar worktop?
These worktops start at a width of 900mm up to a width of 1240mm – and larger sizes are available via our made to measure worktop service.
What is the minimum overhang for a breakfast bar?
The overhang of your breakfast bar should be between 8 inches and 15 inches. This measurement depends on the amount of space you have available to dedicate to your breakfast bar, the height of the people using it, and the type of material you are using for the counter.
How deep should bar counters be?
Bar counter depth can range from 16 to 20 inches deep, depending on your preference. This is also going to depend on the type of seating you choose and what kind of overhang is recommended so that your guests can sit comfortably at the bar with enough leg room.
What are breakfast bars made of?
Common breakfast bar ingredients to keep on hand Rolled oats. Nut butters (such as peanut butter, almond butter, cashew butter) Dried fruits (such as apricots, cherries, cranberries, raisins) Nuts (such as peanuts, almonds, cashews, macadamia nuts, pistachios, walnuts, pecans).
What is breakfast bar height?
How High Is A Standard Breakfast Bar? Breakfast bars are generally 30, 36, or 42 inches tall (42 inches is the most common). Depending on the placement and the rest of the kitchen’s design, you may want to make the breakfast bar the same height as any other adjoining or nearby counters.
Should breakfast bar be same height as worktop?
In most cases the island or breakfast bar height would be the same as the main kitchen, this is to keep the design flowing. Sometimes you can get away with an island being a bit higher, say 900mm worktops and 1100mm island, it isn’t too noticeable. A height of 1100mm works very well for breakfast bars and stools.
Is breakfast bar same height as worktop?
What Height is a Breakfast Bar? In most homes, the breakfast area is around 90cm tall, the same height as the kitchen work surfaces. We’ve made sure that all of our fixed height breakfast bar stools are just the right size for use with worktop height units.
How far can a countertop overhang without support?
The allowable overhang with no additional support is no more than 1/3 of the depth of the countertop and not to exceed 15” total. Overhangs greater than 15” require the installation of corbels. The corbels must be designed to support the weight of the countertop and be mounted to studs.
How much should an island countertop hangover?
Hanging Out on an Island The standard overhang of an island countertop — on the side designed to sit at and tuck stools underneath — is 12 inches. If you plan to extend the counter farther, you need to add supports such as legs, or wood corbels or metal L-brackets that extend half the overhang’s distance.
How much knee space is required under Island?
The NKBA guidelines recommend that each seat be 24 inches wide. But the depth, or knee space, required varies with countertop height. For a 30-inch-high island, knee depth should be 18 inches; for a 36-inch height, it should be 15 inches; and it should be 12 inches for a 42-inch-high island.
What do you put on a breakfast bar top?
Most designers choose a solid wood countertop for breakfast bars. Unlike stone and metal, wood is a naturally warm surface that is perfect for sipping morning coffee or enjoying ice cream. Despite its name, a breakfast bar isn’t just a spot for morning coffee and a bowl of oatmeal.
What kind of wood should I use for a bar top?
Many experienced woodworkers consider walnut to be the best wood for bar tops due to its shock resistance and range of colors. Walnut can be golden, honey colored or medium to dark brown. Walnut bar tops can be satin-smooth with a muted grain or conversation pieces with prominent textures and knotholes.
How thick should a wood bar top be?
The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood. Increased thicknesses are available using a built-up assembly or other construction styles, such as edge grain. The front overhang for the patron side of the bar is typically 6- to 12-inches if you intend to have bar stools.
How high should I build my bar?
The standard height for a bar in the United States is 42 inches. This is the perfect height for a 30 inch bar stool. You want 12 inches of clearance between the top of the bar stool and the top of the bar.
What is the typical overhang on a counter?
A countertop overhang provides a lip that extends beyond the front of your cabinets. The purpose of a standard overhang (usually about 1 1/2 inches) is to prevent liquid spills from dribbling down the face of your cabinets and to keep crumbs from finding their way into the drawers and cupboards below.
Are breakfast bars healthy?
High in protein, healthy fats, and fiber, Perfect Bars are a nutritionally balanced option to start your day. Peanut butter, the main ingredient in these bars, may provide additional benefits when eaten with breakfast.
Why is granola so bad for you?
Granola may prompt weight gain if eaten in excess, as it can be high in calories from added fats and sugars. What’s more, sugar is linked to chronic conditions like type 2 diabetes, heart disease, and obesity.
How thick should my countertop be?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
