Table of Contents
Measure the width of the inside edge of the window frame from left to right in three places – the top, middle, and the bottom. Write down the smallest of the three widths down to the nearest 1/8”. If you have a 1/16” or 1/32” increment when measuring, round down to the nearest 1/8”.
How do I know what size my blinds are?
Measuring for Horizontal Blinds Measure exact window width at top, middle, and bottom. Use the narrowest width. Do not make any deductions – provide the exact measurements of the narrowest width. Measure exact window height at left, middle, and right side. Use longest height.
What are standard sizes for mini blinds?
Standard sized blinds are anywhere from 24 x 72 – 72 x 72 off the shelf at your local hardware stores.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
What widths do mini blinds come in?
Window Width 23 Inch Wide. (92) 36 Inch Wide. (80) 29 Inch Wide. (76) 31 Inch Wide. (76) 35 Inch Wide. (76) 30 Inch Wide. (75) 34 Inch Wide. (72) 24 Inch Wide. (71).
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
What size is a normal window blind?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
How much do you take off when measuring for blinds?
MEASURING INSTRUCTIONS BY MOUNT Measure once on the left, at the center, and on the right and take the longest of the three measurements. If you prefer to keep the blind from resting on the sill deduct a 1/4″ from the height. If your window does not have a sill, measure to the point you would like the blind to reach.
Does Home Depot cut blinds length?
Once you have properly measured, bring your measurements in to the store. Our associates can cut your in-store bought blinds to the exact size needed, for free.
Are blinds length times width?
Decide if you want an inside mount or an outside mount before you begin the measuring process. If you aren’t sure, take measurements both ways and then choose blinds that appeal to you. Always put your width measurement first and height last (W x H).
What are the different sizes of blinds?
The standard sizes of window blinds ought to match these and can be found in most stores: Picture windows: 1–8 feet high, 2–8 feet wide. Double-hung windows: 36–72 inches high, 24–48 inches wide. Sliders: 24–60 inches high, 36–84 inches wide.
Are blinds measured width by height?
One of the most important steps is to measure both the height and width in 3 places – top, middle, and bottom. For Roller Shades, Solar Shades, Sheer Shades, or Vertical Blinds use the measurement from the top of the window. For all other styles, use the narrowest width measurement of the top, middle and bottom.
How wide can horizontal blinds be?
These blinds can be anywhere from 70-96” in width, however for sizes larger than that you’ll have to go for 2 or 3 blinds on 1 headrail. They might be a replica of wooden window treatments but have entered the popular space because of the multitude of benefits they have on offer.
Should blinds touch window sill?
Generally, blinds are usually fitted within a window recess and are fitting so that they touch or sit just above the window sill.
How much space do you need on each side of blinds?
Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How do you install blinds that are too narrow?
Here are some simple installation steps to follow: Position Headrail. Place blind centered in the window with the brackets and mark with a pencil on the top of the window sill on each side of the blinds headrail. Installing the mounting brackets. Install blinds. Install the valance.
Does Lowes cut blinds to size?
Minimum Inside-Mounting Clearance (for most brands) Lowe’s can cut many blinds to custom-fit your windows at no additional cost. Bring in your measurements, and we’ll prepare your blinds while you shop. You can even Special Order just about anything you need for your installation.
Can mini blinds be cut?
You can cut an even amount off of each side of the headrail or if it is a small amount, just cut it off of the lift cord side of the headrail. Remove the end stiffener from the headrail. With the tin snips or hacksaw, carefully cut the headrail along the mark you made.
What are standard window sizes?
Widths can be 2 feet, 3 feet, 4 feet, 5 feet, 6 feet, and 8 feet. Standard heights can range from 2 feet tall to 8 feet tall, with additional heights of 18, 52, 54, and 62 inches. Rough openings are in whole numbers, while 1/2 inch is taken from each rough opening size to get the actual window size.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
Is there an app to measure windows?
Windowmaker Measure 2.0 – Smartphone/Tablet App for Window & Door Measurements. Windowmaker Measure allows a salesperson or surveyor to capture photos and add text or voice annotations for each ‘hole in the wall’. It provides automatic and precise measurements of window & door openings with various approaches.
