Table of Contents
How do you attach a mantel to an existing fireplace?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
How is a mantle attached to a brick fireplace?
The mantel is lifted into its wall position by aligning the holes to the support rods. The mantel is pushed back into the rods and against the bricks. Secure attachment of a mantel to a brick fireplace is realized by tapping it in with a hammer and a scrap wood spacer.
How do you install a floating mantel on a brick fireplace?
Make sure those marks are level, centered and extend far enough to cover the mantel’s length. drill holes at each mark. Drill Sleeve Holes. Drill holes at each mark using a drill and 3/4″ masonry bit. insert lead sleeves into holes. Insert Sleeves. drive lag bolts. Drive Lag Bolts. install the mantle. Install Mantel.
Can you add a mantel to a tile fireplace?
If you plan on installing a mantel to help complete your fireplace surround, you will need to do so over the tile facing. Because tile is a hard, durable covering, take additional steps to ensure the mantel is properly secured and mounted into place.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
Can you add a mantel to a brick fireplace?
Since wooden mantels are quite heavy, they need to be securely attached not only to the brick fireplace but to the wall studs behind the brick. You can attach a wooden mantel to a brick fireplace in an afternoon with common hand-operated tools.
How do you attach a wood mantel to a brick fireplace?
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How far above fireplace should mantle be?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
Can you put wood over tile on a fireplace?
Yes, you can lay a wood floor over tile if the existing floor is in good shape and without cracks. I would suggest 3/8” thick, prefinished engineered hardwood flooring or easy to install laminate flooring.
How do you hang a heavy mantle on drywall?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
How do you attach a mantel to a stud?
Installing Support Rods The mantel needs to anchor to the studs in the wall above the fireplace. Drive 1/2- or 3/4-inch rebar rods or lag screws into pilot holes drilled into the studs. For best support, drive them all the way through the stud. Place one rod or screw in each stud behind the mantel.
How heavy can a mantle be?
The maximum weight for all 60INCH MANTELS is 150 lbs. The maximum load for all 72 inch mantels is 180 lbs.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
How is a mantle attached?
Since neither option is very sturdy, we recommend you attach the mantel to a cleat—a simple piece of lumber securely fastened to the wall. One cleat runs horizontally under the mantel shelf, and the others run vertically inside the legs (most mantels are hollow in back).
Why do fireplaces have mantles?
Why Do Fireplaces Have Mantels? The purpose of a fireplace mantel was traditionally to catch smoke before it entered the room from the firebox of an open fireplace, but mantels in more modern times are used primarily for decorative and aesthetic purposes.
What is code for a fireplace mantel?
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.
Are wood mantels safe?
The primary goal is to help you avoid creating unsafe situations that can result in a fire burning your home and possibly causing the loss of life. The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening.
Can you use a floating shelf as a mantle?
For those of you that haven’t opened up your Kreg Jig yes, this is a GREAT beginner project! The shelf is 60″ long making it a perfect mantle as well! I also think floating shelves are perfect for renters. Really you only leave a few screw holes in the wall that are very easy to fill and paint back over.
How do you secure a mantel to a brick fireplace?
Mark where the anchors or brackets line up on the mantel and drill the corresponding holes. Lift the mantel and place it so that the lag bolts or brackets fit into the holes. For extra security, coat the tip of each bolt with liquid nails or another adhesive just before installation.
Can you put floating shelves on tile?
If you’re looking to install floating shelves on a tile wall, it requires the use of anchors to keep things sturdy and safe. Here’s how. The floating shelves in the laundry room are now painted and finished! They’re everything I wanted: wide, solid, long… and not at all chunky.
Can you put shelves up on tiles?
Hanging something on a tile wall is easy—if you’re lucky enough to catch a stud, that is. If you’re not, you’ll need to use a hollow wall anchor to keep your new shelf in place.
