Table of Contents
How deep should a countertop bar be?
A breakfast bar should be 24 inches deep. This depth gives you an appropriate amount of space on your counter without being too big.
What is the base for countertops?
If you are intending to have a countertop made from tiles, you can make a base for it with the use of ¾ inch plywood. Make your base equal to the size of the base cabinet on which you will be creating the countertop. Your plywood base should be laid over with cement backer board that is ½ inch thick.
Do I need plywood under granite countertop?
When installing granite countertops, you will not need an underlayment of plywood if the granite has a thickness of 3 centimeters (about 1 1/4 inches). However, 2 centimeter granite needs support under it since it is less sturdy, so having a plywood underlayment is a must.
How much overhang should a bar top have?
A typical overhang for a comfortable seating area should be around 25-30cm (10-12”), this should leave enough knee room and adequate space between the countertop edge and the person seated. Therefore, as the depth of the overhang increases, so does the comfort and usability of the bar.
How wide should a kitchen bar top be?
The main bar top surface should be at least 16” wide and can be as wide as 20” or more depending on the space available but enough space should be provided for a dinner plate, pan of pizza and some drinks.
How long should a bar be for 3 stools?
In order to determine how many stools will fit at your kitchen island, home experts recommend you allow 28 to 30 inches for each seating space, which means you can divide the length of your island’s counter by 30 to to figure out how many stools will comfortably fit.
How thick should plywood be for bar top?
When making a home or commercial bar top we always recommend using ¾” thick solid hardwood for the main bar top as it is more durable and longer lasting than a plywood top and can even be refinished.
What kind of wood should I use for a bar top?
Many experienced woodworkers consider walnut to be the best wood for bar tops due to its shock resistance and range of colors. Walnut can be golden, honey colored or medium to dark brown. Walnut bar tops can be satin-smooth with a muted grain or conversation pieces with prominent textures and knotholes.
What do I need to build a bar?
Required Materials for this Project 2 x 4s. 3/4-in. plywood. Bar molding. Base material. Beer tap kit. Construction adhesive. Drywall screws. Foam insulation.
How much does it cost to build a home bar?
A home bar costs $8,000 on average or $500 to $22,500. Custom work runs $5,000 to $20,000. Premade units run from $800 to $6,000, not including plumbing, outlets or lighting. Labor and design fees range from $200 to $8,000.
What is standard bar height?
A bar-height table generally measures in the 40- to 42-inch height range. A counter-height table runs about 34 to 36 inches tall, and standard dining-height tables range from 28 to 30 inches tall.
Can you make a bar out of pallets?
Pallet wood is ideal for DIY projects because it’s easy to get hold of, costs little or nothing and is extremely versatile – so it’s the perfect material to use for constructing a homemade bar.
Where can I get pallets for free?
Ten Places to Find Free Pallets for Hobbyists/Crafters Bars and craft beer locations. Pet food stores. Feed & Tack stores. Stationary shops. Furniture stores. Liquor stores. Schools. Flooring stores.
What is the average height of a countertop?
Kitchen – The standard kitchen counter height is 36 inches (3 feet) above the floor. Kitchen islands designed for bar-style seating can climb as high as 42 inches.
Can you use plywood as a countertop?
Plywood countertops add an aesthetic beauty that can’t be matched by plastic or tile. It is not as durable as laminate, but when properly sealed will last almost indefinitely and adds the warmth of real wood to a kitchen or business. Finished plywood is also popular for high-end tabletops and furniture.
How thick is a countertop?
The industry standard thickness for kitchen, bathroom, and other countertop surfaces in natural stone is 1.25 inches. This thickness provides the strength and stability required to create an unbroken surface without the need for stabilizing it with a plywood backing.
How much overhang can you have with granite?
According to the Marble Institute of America, you can safely overhang granite that is 1 ¼ inches thick up to 10 inches without support. However, the cantilevered portion cannot be more than one-third the total width of the countertop.
Are granite countertops glued down?
Granite is frequently used as a countertop material in kitchens and bathrooms. This heavy stone is cut to fit the shape of the cabinets it is installed on and requires an adhesive to help hold it in place because granite cannot be screwed down.
What is the best thickness for granite countertops?
The industry standards typically hover around 1 and 1/4 inch (or 3 centimeters) for granite and marble kitchen island countertops and 3/4 inch (or 2 centimeters) for bathroom granite and marble vanity tops.
How much counter overhang do you need for bar stools?
Stools for raised 42-inch countertops are usually between 28 and 30 inches tall, giving a comfortable 12 to 14 inches of knee room. The recommended counter overhang also varies with the counter height, with experts suggesting 15 to 18 inches for the lower counter and 12 inches for a raised counter.
How far can a countertop overhang without support?
Different countertop materials have different requirements. Solid Surface countertops can overhang 6 inches without additional support (e.g. plywood decking). 3 cm Quartz (engineered stone) can handle a 14 inch overhangs and 3 cm Granite overhangs should not exceed a 10 inch overhang without additional support.
How much should an island countertop hangover?
Hanging Out on an Island The standard overhang of an island countertop — on the side designed to sit at and tuck stools underneath — is 12 inches. If you plan to extend the counter farther, you need to add supports such as legs, or wood corbels or metal L-brackets that extend half the overhang’s distance.
How much room do you need behind a bar?
How Much Space is Behind a Commercial Bar? There is roughly 3′ of space behind a commercial bar. It’s recommended that the width of this aisle be between 31” and 37”. But if your bar is using barbacks, you should be on the larger end of that range.
How tall should a stool be for a 36 inch counter?
Counter stool height: Countertops range from 36 to 39 inches, so you’ll need a counter stool that ranges from 24 to 26 inches high. Bar stool height: Bar tops are usually around 40 to 42 inches high, so opt for a bar stool about 28 to 30 inches tall.
How much should a countertop overhang?
Generally, the standard overhang of a countertop is 1 to 1 ½ inches from the cabinet, while the exposed ends of a countertop will usually have a ½ inch overhang, and the ends that meet a wall don’t have any overhang at all to keep the fit flush to the wall.
How many barstools do I need for a 6 foot island?
If you have a 6ft counter top you can fit 3 average size bar stool. If you have a 6ft Kitchen island you can fit 6 average sized bar stools.
How wide does a bar need to be?
Home bar tops are usually between 12- to 16-inches wide. Commercial bar tops vary from 20- to 28-inches in width, including a drink rail (or trough) on the server side of the bar. Drink rails are typically 3/4-inch deep by 4-inches wide. The minimum bar top thickness is 1 3/4-inches utilizing a flat grain wood.
Are raised eating bar out of style?
Raised bars are out of fashion. Having one height benches give you much more bench space for preparation and entertaining.
How tall should I make my bar?
The standard height for a bar in the United States is 42 inches. This is the perfect height for a 30 inch bar stool. You want 12 inches of clearance between the top of the bar stool and the top of the bar.
What tools do I need to build a bar?
Tools Required to Build a Home Bar: Compound Miter Saw. Circular Saw. Drill. Hammer. Finishing Nails. Nail Gun. Brad Nails 15-16 Gauge (Optional) Safety Glasses.
How thick should plywood be for countertops?
The average thickness of plywood sheets used for backer on counter tops is 3/4-inch. This provides adequate support for a wide range of finish materials. You can use it as a stand-alone product as well as a finish-type plywood if it has a laminate finish that you can paint or finish according to personal preference.
How high should a foot rail be on a bar?
Standard bar foot rail height is about 6 inches. The bar rail height is measured from the floor to the center of the tubing. So, this means that the center of the rail should be about 6 inches off the ground to provide the best comfort for the bar patrons.
Should kitchen island be taller than counters?
Standard kitchen island height is the same as standard counter height: 36″. That’s a good height for working and seating for average adults. If you plan to use your island mainly for seating and in-kitchen eating space, select bar stools that suit your island height.
