Table of Contents
Since neither option is very sturdy, we recommend you attach the mantel to a cleat—a simple piece of lumber securely fastened to the wall. One cleat runs horizontally under the mantel shelf, and the others run vertically inside the legs (most mantels are hollow in back).
How is a fireplace mantel attached?
As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. In this case any screws or nails may be located on top or beneath the mantel.
How do you remove a fireplace mantel?
Pound the bottom of the mantel shelf with a rubber mallet to separate it from the wall if it doesn’t release when you pry the base of the mantel away from the wall, advises Fireplace Town. Tap it gently, but with enough force to pull the nails from the wall. Once it’s loosened, pull out on the shelf to remove it.
How are mantels attached to brick?
Lift the mantel and position it in place, aligning the holes in the back of the mantel with the support rods. Push the mantel onto the rods until the back of the mantle is against the bricks. Gently tap with a small hammer and a small piece of wood if necessary to completely align the mantel next to the brick.
How is a mantle attached to a brick fireplace?
The mantel is lifted into its wall position by aligning the holes to the support rods. The mantel is pushed back into the rods and against the bricks. Secure attachment of a mantel to a brick fireplace is realized by tapping it in with a hammer and a scrap wood spacer.
How do you attach a mantel to an existing fireplace?
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How do you hang a heavy mantle on drywall?
Holding your drill at a 45 degree angle downward, drill a pilot hole through the shelf and drywall and into the stud. Install a finishing nail into each of the pilot holes with a nail gun or hammer; the nails must be long enough to penetrate at least 1 inch into the drywall. These nails will secure the mantle in place.
Can I remove my fireplace insert?
A wood-burning fireplace insert must be removed when your fireplace and chimney enclosure need cleaning. Most wood-burning fireplace inserts are heavy and are secured to the enclosure with screws or bolts. If you don’t want to hire a professional to remove the fireplace insert, you can attempt to remove it yourself.
How much does it cost to replace a fireplace mantel?
Install a Fireplace Mantel: national average cost The national average materials cost to install a fireplace mantel is $236.47 per mantel, with a range between $212.16 to $260.79. The total price for labor and materials per mantel is $578.11, coming in between $483.53 to $672.69.
What type of wood is used for mantels?
Walnut is a popular choice for fireplace mantels. It is a harder and heavier type of wood than most and is extremely durable. The rich dark brown wood is an excellent for an impressive fireplace mantel. Hickory is also a great choice for a fireplace mantel if you are going for a unique look.
How do you install a floating mantel on a brick fireplace?
Make sure those marks are level, centered and extend far enough to cover the mantel’s length. drill holes at each mark. Drill Sleeve Holes. Drill holes at each mark using a drill and 3/4″ masonry bit. insert lead sleeves into holes. Insert Sleeves. drive lag bolts. Drive Lag Bolts. install the mantle. Install Mantel.
How do you hang a heavy wood mantel?
Slide Over Bolts Method Locate the studs behind the brick, stone, or faux veneer. Drive 1/2in lag screws through each of the studs. Have a helper support the mantel while you mark the location of the support rods on the back of the beam. Apply construction adhesive into the holes. Slide into place, admire, and enjoy!.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How much weight can a fireplace mantel hold?
Combustible objects placed on or around the mantel must meet your fireplace manufacturer’s requirements for clearances to combustibles. DO NOT OVERLOAD MANTEL: THE MAXIMUM LOAD FOR ALL 60 INCH MANTELS is 150lbs. MAXIMUM LOAD FOR ALL 72 INCH MANTELs is 180lbs.
How do you screw a stone fireplace?
Using the masonry drill bit drill a hole into the stone/brick as deep as the lead anchor directions say to go. With a hammer tap the anchor into the hole. With a screwdriver insert the screw into the anchor leaving space to hang your art on the end. Hang your art!Sep 28, 2021.
How do you attach wood beams to drywall?
Covering the Beam Screw drywall to a wooden beam on the three exposed sides to cover them, using type W drywall screws, also called “coarse thread” screws. Add joint compound, commonly called “mud” in the drywall trade, at the inside and outside corners.
How far should a mantle stick out?
A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).
How far above fireplace should mantle be?
As a general rule, it’s important to mount the mantle an average of 12 inches over the fireplace opening, which is a general rule from the National Fire Protection Agency (NFPA) to ensure it’s up to code. The mantle can also be 4 1/2 feet above the floor.
What is the difference between a fireplace and a fireplace insert?
Fireplaces will have large viewing areas and box dimensions because they are designed to be built into new construction and not limited by the existing fireplace opening size. A fireplace insert is basically a stove, wood or gas, that is designed to be inserted into a fireplace that is already there.
How do I replace my mantel?
Here’s how to replace your fireplace mantel in a few easy steps. Step 1 – Remove the Old Fireplace Mantel. Step 2 – Measure. Step 3 – Purchase a New Fireplace Mantel. Step 4 – Attach the Support Ledger. Step 5 – Prepare the New Mantel. Step 6 – Attach the Mantel to the Support Ledger Board. Step 7 – Secure the Mantel.
Is a fireplace insert worth the money?
Are Fireplace Inserts Worth the Money? Savings: Fireplace inserts can help you to cut down on your heating bill. A fireplace insert is not recommended as a sole use of heating but when used in conjunction with turning down your thermostat, can save you money on your heating bill.
How much does a new fireplace insert cost?
How much does a fireplace insert cost? Most fireplace inserts and a professional installation cost about $2,000 to $4,000, depending on the state of your existing chimney and the model you select. Some electric models cost significantly less, but they offer less heat output than wood and gas fireplace inserts.
