Table of Contents
Can you install hardwood floor over plywood?
Engineered or Solid Wood Flooring that is less than 1/2″ thick can be installed over a plywood subfloor.
What kind of flooring can you put over plywood?
As a general rule, you can install vinyl flooring over plywood. In fact, it’s recommended to put a ¼ inch (6 mm) layer of plywood on top of the subfloor you’re installing the vinyl on to.
What is the recommended underlayment for hardwood flooring?
What Underlayment is Best for Wood? When installing hardwood or engineered wood flooring, the best underlay options are cork and foam. However, foam does have more give than cork so, while it is the more popular option, we recommend cork. Cork has less give, making it less likely to flex underneath your planks.
What goes on top of subfloor?
Underlayment: Some types of flooring can be installed directly on top of the subfloor, such as vinyl flooring. Other types need a middle layer, called underlayment, such as laminate,carpet and tile.
Can you install hardwood flooring over OSB board?
OSB can accommodate glue-down, nail/staple or floating hardwood installations. With glue-down, follow the hardwood flooring manufacturer’s guidelines. Achieving a quality hardwood floor over an OSB substrate is not difficult, and is largely the same as working on top of plywood.
What goes between subfloor and hardwood?
Underlayment is the layer of material that sits between the subfloor and the new hardwood flooring. Subflooring is a layer of plywood or engineered wood that sits at the very bottom layer of the flooring.
Is underlayment necessary for hardwood floors?
Why You Need Underlayment While underlayment isn’t always necessary for your hardwood floors, there are always benefits to it. It allows your flooring to lay correctly over the subfloor, preventing tripping hazards or an uneven appearance. Underlayment also provides extra sound absorption for your floor.
What do you use to fill gaps in plywood subfloor?
Fill Plywood Subfloor Gaps An effective strategy for filling large gaps is to mix patching compound to a stiff, mortar-like consistency, trowel it into the plywood subfloor gaps and wait for it to stiffen before troweling it smooth. Some sanding may be needed when it sets completely.
How do you prepare subfloor for hardwood floors?
Shape Up the Subfloor Whether the hardwood floor you’re installing will be floating, nail-down, or glue-down, you must ensure that the subfloor—be it plywood, concrete, or plywood over concrete—is clean, dry, flat, and sound.
How do you fill gaps in plywood?
While it’s best to fill any voids prior to attaching pieces of plywood together, you can fill voids between plywood sheets with wood filler. Sand the surface of the plywood with 80-grit sandpaper. Combine wood filler with some of the sawdust in a small container. Fill a syringe with the wood filler.
Does plywood need expansion gap?
APA recommends a 1/8-inch space between panel edge and end joints. Plywood and oriented strand board (OSB), like all wood products, will expand or shrink slightly with changes in moisture content. If the wood structural panels are tightly butted, there is no room for expansion and buckling can occur.
How thick should plywood be for flooring?
Some experts suggest that 15/32-inch plywood should be standard if the underlying floor joists are spaced 16 inches apart or less, but slightly thicker 3/4-inch plywood should be used for joists spaced further apart.
Can you use subfloor as your floor?
Concrete subflooring is acceptable as regular flooring, as long as it’s in a moisture-proof environment. Consider the long-term effects of leaving your subflooring exposed.
Do you staple down underlayment?
There is no fastening the underlayment to the subfloor. If your choose this route, staples are a good choice to fasten the underlayment. Staples usually have a coating which help increase the holding power. Using a crown compression stapler, staple 2 inches on the seams and edges with 4-6 inches apart in the middle.
What is the difference between subfloor and underlayment?
The subfloor is the bottom most structure of the floor. It provides a flat and stable surface and supports the actual floor. Underlayment is different from the subfloor in that it rests between the subfloor and the actual floor.
Do you nail or screw subfloor?
Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.
How do you secure plywood to subfloor?
Attach the smaller piece to the subfloor with a 1-inch wood screw every six inches in each direction using a power drill. Push the full sheet tightly against the small section of plywood and the wall, and attach to the subfloor with a screw every six inches.
What do you put between subfloor and underlayment?
Use building paper! Yep, put down an underlayment of 15-pound felt building paper between a wood subfloor and your hardwood planks, and you can reduce the chance of squeaky floors and control moisture.
Is OSB OK for subfloor?
Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.
Can you install a new hardwood floor over an old one?
With all that said, although you can add New Wood Flooring over the old one, the answer is YES. New Hardwood Flooring Over Old Hardwood Flooring: 3/4 “thick or thicker Solid or Engineered hardwood flooring must be built over old wood flooring boards (at an angle of 90 degrees).
