Table of Contents
How much space is needed for inside mount blinds?
3⁄4″ is the minimum depth required for inside mount blinds.
How much smaller should blinds be than the window?
Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?Jun 25, 2021.
How do I know what size blinds to buy?
Measuring for Horizontal Blinds Measure exact window width at top, middle, and bottom. Use the narrowest width. Do not make any deductions – provide the exact measurements of the narrowest width. Measure exact window height at left, middle, and right side. Use longest height.
How do you measure a window for blinds?
To measure for blind length, take the same approach using the metal tape measure from the top of the recess to the windowsill at 3 points and note the narrowest point. For vertical blinds, we recommend you reduce the length by 1cm to prevent the fabric from catching on the sill.
What is the standard size for window blinds?
If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.
Should blinds be flush with window?
1. Measuring window frame for accurate blinds fitting. 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.
How wide should outside mount blinds be?
Round off your measurements to the nearest 1/8 inch. As a rule, the blinds will look nice if they extend about 3 inches beyond each side of the window opening. So a 42-inch-wide window calls for a 48-inch-wide blind that allows for a 3-inch overlap on each side.
Does the width of a roller blind include the fittings?
For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.
What is inside blinds?
An inside mount is when blinds or shades are installed inside the top of the window frame. Installing window treatments as an inside mount gives your windows a clean, finished look, allows blinds or shades to be flush with the trim or wall, and doesn’t cover decorative molding.
What size blinds do I need for a 35 inch window?
The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.
How do I measure a window?
Measure the height from the head of the window (top fixed-frame piece) to the windowsill (bottom fixed-frame piece) As with the width, take three measurements: down the left side, right side and the middle. Record the shortest measurement — this ensures that the new window will fit.
How many inches is a standard window?
A 2020 standard window is one of the most common window sizes you’ll come across in most homes, small-scale office buildings and apartments. This window size typically refers to a 24×24-inch frame.
Do you need a drill to install blinds?
Hanging window blinds is super easy, and it doesn’t even require a drill. Having a drill will make it easier, but you can do everything with a screwdriver. And if you need to make a pilot hole to get the screw started, simply tap the end of a nail into the wall with a hammer and then pull the nail back out.
What is the difference between inside mount and flush mount?
Minimum inside mount depth is the amount of depth required to securely mount the shade/blind inside the window frame. The minimum flush mount depth is the required mount depth needed for the shade/blind to fit fully inside of the window frame, without protruding outward at all.
What does inside flush mount mean?
Flush Inside Mount means the entire shade fits within the window frame. In other words, if you were to run your hand along the wall or window frame, your hand would not bump into the shade. The minimum window frame depth required for a flush mount is 2 1/4″.
How much space do you need between blinds and window frames?
To minimize light leakage the blind should overlap the window opening by at least 1 1/2″ on each side for a total of 3″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″.
When measuring for an inside mount shade Which of the following is important?
The height of the window also needs to be measured in three different places: left, center, and right. These measurements should also only be taken of the inside of the frame for inside mount blinds. Like the width, the height measurement should also be rounded to the nearest ⅛” inch.
How do you measure a double window for blinds?
For two (2) separate blinds in one window, take the smallest width and divide it by 2. (The factory will deduct 1/8″ – 1/4″ from each blind.) For three (3) blinds in one window, repeat the same steps. Then add 1/8” to the width of the left and right blind.
How wide do roller blinds go?
Generally, our standardchain operated roller blinds can reach a maximum of 3450mm wide and our new Premium XL range of roller blinds can reach up to 4700mm wide, which for most people is plenty wide enough.
How do you measure fabric for roller blinds?
For roller blinds you need to decide how far above the window you want the blind to hang. You also need about 5cm each side and 5cm at the bottom. Measure from E to F to get the width and then G to H to get the finished length.
Can all roller blinds be cut to size?
You can usually buy roller blinds in different sizes. If you’re lucky, you’ll be able to find one that fits your window perfectly. But if not, it’s easy to cut a blind to the right size. Choose a blind that’s slightly longer and wider than the window frame.
Should blinds go inside or outside the window?
If you’re installing blackout window treatments to block unwanted light, then you should use outside mount blinds. Mounting blinds outside the window frame will give you more light coverage than blinds that hang from the inside.
Can you mount shades inside window?
Inside mounted blinds and shades will give you the cleanest look. That is because they fit inside the window frame, and can be mounted as deep or as shallow as you like. Outside mounted blinds and shades give the flexibility of choosing almost any window covering for any situation.
