Table of Contents
A tenoning jig locks a board against a plate and holds it tightly in place so it can cut cheeks and shoulders on all four sides of a tenon. A stop piece keeps the board square in both directions. Cutting on all four sides of a tenon allows for a better fit, thus making the joint easier to conceal.
What is a tenoning machine?
Tenoning machines use cutter heads and/or saw blades to form projections (tenons) on pieces of stock. Each tenon can be inserted into a cavity (mortise) on another piece of wood to form a mortise and tenon joint. The figure to the right shows a single-end tenoning machine.
How does a mortising jig work?
Mortising bits cut square holes. The auger bit fits inside the chisel and protrudes slightly. During operation, the auger drills a round hole and the four-sided chisel squares the corners. Cut side by side, square holes create mortises.
What tools do I need to make a mortise and tenon joint?
If you’re doing woodworking on a shoestring budget, you’ll be happy to know that the only tools you need to cut tight-fitting mortise and tenon joints are a square, knife and marking gauge, a fine-toothed saw, and a couple of sharp chisels and mallet.
How does a tenoning machine work?
Tenoners utilize saw blades or cutter heads to create specific projections (called tenons) on wooden workpieces. Each of the tenons can be put into an appropriate cavity (called mortise) on another wooden workpiece to create a mortise and tenon joint.
What does a spindle moulder do?
The guard’s main purpose is to provide pressure on the workpiece to hold it very firmly onto the table and horizontally against the fence. Compared to its smaller cousin, the router table, a spindle moulder is able to produce work with a much larger profile such as a crown moulding.
What does a mortiser do?
A mortiser or morticer is a specialized woodworking machine used to cut square or rectangular holes in a piece of lumber (timber), such as a mortise in a mortise and tenon joint.
Can a router be used as a mortiser?
Creating accurate mortises quickly is a great way to get the most out of your plunge router. This easy-to-use jig simplifies the process. One of the best ways to get the biggest bang from a plunge router is to put it to work routing mortises. The technique is easy to master and the results are top-notch.
What is a BeadLOCK jig?
This advanced version of the innovative BeadLOCK loose tenon system offers several joinery options in one easy-to-use jig. The original, basic BeadLOCK system is essentially a drilling guide that allows you to create accurately sized and positioned mortises in mating workpieces with just a hand drill.
What is the weakest wood joint?
The Butt Joint is an easy woodworking joint. It joins two pieces of wood by merely butting them together. The butt joint is the simplest joint to make. It is also the weakest wood joint unless you use some form of reinforcement.
How deep should a mortise and tenon joint be?
The mortise depth should be roughly three times the thickness of the tenon. It can be cut in several ways, among them the traditional approach of using sturdy mortising chisels and a mallet to chisel out the hole by hand.
Can you cut tenons on a table saw?
Video: How To Cut Tenons With A Table Saw – Video Transcript. Chris Marshal: Now the good news about tenons is you can use any table saw to make them, using either a standard blade or a dado blade set. You don’t need a big cabinet saw like this one over here to make tenons.
What does Tenoner mean?
(tĕn′ən) A projection on the end of a piece of wood shaped for insertion into a mortise to make a joint.
What is a Tenoner used for?
Tenoners are woodworking machines that are used to produce tenons, projecting wooden members that fit into a mortise. Typically, tenoners are used with a router and equipped with router spindles.
What is a tenon jig for table saw?
This jig enables you to safely make a cut on the table saw with the workpiece held vertically as it moves over the blade.
What is a Delta shaper?
DELTA® Industrial shapers feature a spindle, housing, motor, raising and lowering mechanism that is a single self-contained unit, securely assembled to the underside of the table for absolute 90° spindle-to-table alignment: spindle, 3″ travel; 5-1/4″ capacity under nut.
How does a molder work?
Moulders and How They Work It is called a moulder, because it essentially “moulds” the shape by cutting away the excess wood needed to reveal the profile. This process happens on all four sides of the board in one pass through the machine.
What’s the difference between a shaper and a moulder?
A wood moulder differs from a shaper, which typically has one vertical cutting head and none horizontal. The term “tooling” refers to a moulder’s cutters, knives, blades including planer blades, and cutterheads.
Can you use a hollow chisel mortiser as a drill press?
At their most basic, hollow-chisel mortisers are mechanically and operationally the same as drill presses. Both have a spinning chuck, and both have feed levers that lower and raise the chuck through the workpiece.
What is a mortise in woodworking?
A mortise (occasionally mortice) and tenon joint connects two pieces of wood or of material. Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at right angles. In its most basic form, a mortise and tenon joint is both simple and strong.
How do you cut a fence post into a mortise?
How to Cut a Mortise in a Fence Post Lay out the desired location of the mortise opening on the side of the fence post. Cut the perimeter line of the mortise using a wood chisel. Chip out the interior area of the mortise outline, cutting toward the inside and pivoting the chisel to remove the wood chips.
What is a mortise router bit?
Freud Mortising Bits are designed to deliver clean, precise, splinter free mortises in plywood, veneer, solid wood or almost any composite material. Most of these bits feature a down shear design that helps eliminate splintering by pushing wood fibers down during the cut.
