Table of Contents
How to Clean Concrete Floors Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum, soft bristle broom or dry dust mop. Apply Simple Green Multi-Surface Floor Care. Spray the cleaning solution as a light mist across your floor section by section. Mop up in sections. Dry.
What is the best thing to clean concrete floors with?
You’ll just use a mop and a bucket of water mixed with a mild cleaner. Don’t use ammonia, bleach or any highly acidic substance on polished or stamped floors. Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners.
How do you clean unsealed concrete floors?
How to Clean Unsealed Concrete Floors Sprinkle sawdust on grease and oil stains. Sweep the floor with a push broom. Dust mop or vacuum the floor. Apply detergent and water on the stains. Scrub the stained spots with a brush. Mop with a baking soda solution. Rinse and wipe the floor dry.
What is the best way to clean a concrete basement floor?
How To Clean Your Concrete Basement Floor Start By Removing As Much As You Can From The Floor. Thoroughly Sweep Or Vacuum To Remove Debris. Treat Any Stains. Scrub Your Floor With Your Chosen Cleaning Product. Thoroughly Rinse Your Floor. Let The Floor Dry Thoroughly Before Returning Furniture And Using The Room.
Can you use vinegar to clean concrete floors?
A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.
Can you use Swiffer on concrete floors?
All You Need to Know About Polished Concrete Floor Cleaning Never use any acidic based cleaners like: Swiffer Wet-Jet. Pine-Sol. Bleach.
Can you use Pine-Sol on stained concrete floors?
Don’t: Never use everyday floor cleaning products, such as Pine-Sol; always select a pH-neutral cleaner. Never use products such as ammonia, vinegar, bleach, muriatic acid, or other harsh cleaners on concrete floors.
How do you clean stained concrete floors indoors?
Perhaps the best cleaning solution for interior stained concrete floors is actually the simplest solution — dry mopping and occasionally wet mopping using a pH-neutral cleaner. This alone is usually enough to keep your floor pristine, especially for concrete with low foot traffic.
How do you clean rough concrete floors?
Mix a gallon of warm water with 2 or 3 ounces of trisodium phosphate and pour it directly over any difficult stains on your concrete. Use your wire brush to scrub the concrete surface and then rinse with water. You can find trisodium phosphate, or TSP, for sale in home improvement stores.
How do you clean sealed concrete floors indoors?
To clean a sealed concrete floor, sweep or vacuum the surface to remove any loose dirt and then mop using a dust mop to get rid of fine dust. Mop the floor with warm water mixed with dish soap and then rinse off using a clean mop and fresh, clean water.
Is it OK to use bleach on concrete?
Concrete floors are commonly used in basements, patios and garages. Since these areas are prone to dirt, residue, mold or mildew, you should clean them with bleach. Bleach effectively removes many stains, deodorizes and kills mold and mildew when used properly. Allow the bleach solution to sit for five minutes.
Is vinegar harmful to concrete?
2. Stone, Concrete, and Ceramic Tile Floors. When it comes to cleaning stone, concrete, and ceramic tile floors, leave the vinegar under the sink. Vinegar will strip away the protective seal coating, making the floor vulnerable to water damage, stains, and pitting.
Does Roomba work on concrete floors?
Braava dry and wet mops, the Roomba vacuums; both would work on concrete floors. If you are feeling rich, you can get the Roomba to vacuum before the Braava to wet mop. As long as the concrete floor is smooth, I’d say you need a Braava. The Braava is essentially a mopping device and the Roomba is a vacuuming device.
Are concrete floors bad for your feet?
According to experts, concrete floor systems can cause everything from bunions and ingrown toenails to shin splints, lumbar strain, and achilles tendonitis. It can also lead to lower back pain, stress fractures, knee pain, and worsening of arthritis symptoms.
What kind of wax do you use on concrete floors?
Cherry Wax provides excellent scuff and abrasion resistance for all types of interior flooring applications including stained concrete floors and epoxy floors. It’s superior resistance to traffic, yields a smooth polished look for months without maintenance.
Do you have to rinse Pine Sol off floors?
A: Yes. Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
How do I get my concrete white again?
Apply vinegar or bleach to the discolored areas. If you use vinegar, do not dilute it. Pour it onto the concrete and scrub it into the surface with a scrub brush. If the discoloration starts to fade, repeat until it disappears completely.
How do you remove black stains from concrete?
Sweep the concrete with a broom to remove any loose dust and dirt. Mix 1 cup of ammonia and 1/2 gallon of warm water in a bucket. Apply the mixture to the black stain and let it stand for 5 minutes. Wet an old towel or shop towel with warm water from a sink.
How do you clean a concrete balcony floor?
Clear the Patio. Remove all furniture, grills, plants, and toys from the patio. Mix the Cleaners. Pour one cup baking soda into a plastic bucket or bowl. Scrub, Scrub, Scrub. Allow the mixture to sit on the concrete surface for around 30 minutes. Rinse and Dry. Rinse away the cleaning solution.
Does Coca Cola remove oil stains from concrete?
One of the oldest tricks used to remove oil stains involves using Coca-Cola on the stain. This method typically works best on smaller sized stains. You can use any type of cola product and pour it directly over the oil stain and then let it soak in overnight (or for at least 8 hours).
