Table of Contents
Here’s how to replace your fireplace mantel in a few easy steps. Step 1 – Remove the Old Fireplace Mantel. Step 2 – Measure. Step 3 – Purchase a New Fireplace Mantel. Step 4 – Attach the Support Ledger. Step 5 – Prepare the New Mantel. Step 6 – Attach the Mantel to the Support Ledger Board. Step 7 – Secure the Mantel.
Is it hard to replace a fireplace mantel?
A painted wood mantel is the easiest to install. It may need to be shimmed till it’s plumb and level; then it’s fastened to the wall studs with countersunk screws. Small gaps around the perimeter can be filled in with caulk and painted. If a wood mantel is clear finished, the job is much less forgiving.
How do you remove an old mantel?
Place a pry bar along the side of the mantel and tap in place with the hammer if it is a full mantel. Begin at the top edge and pry the mantel off the side of the fireplace. Move the pry bar down the side length of the surround; tap the pry bar in place and pry the side piece off until you’ve removed the entire piece.
How expensive is it to replace a fireplace mantel?
The national average materials cost to install a fireplace mantel is $236.47 per mantel, with a range between $212.16 to $260.79. The total price for labor and materials per mantel is $578.11, coming in between $483.53 to $672.69.
How much does it cost to replace Mantle?
Cost to Install a Fireplace Mantel Fireplace Mantel Costs Zip Code Mantels Basic Better Fireplace Mantel – Material Prices $285.00 – $350.00 $555.00 – $825.00 Fireplace Mantel – Installation Cost $150.25 – $175.35 $190.50 – $220.05 Fireplace Mantel – Total $435.25 – $525.35 $745.50 – $1045.05.
How easy is it to remove a fireplace?
If it’s a wooden or tiled surround, it can be as simple as removing screws and lifting it away. You may need some help with tiled surrounds due to their weight. It’s also important to wear gloves and protective goggles if you choose to break them up with a sledgehammer.
How do you update an old fireplace?
But if your mantel is looking a little tired there are lots of budget-friendly, practical tips to give it a makeover. Start by giving it a good clean. Brush it up with paint. Embrace the materials. Whitewash it. Tile in style. Fit a floating beam. Replace the mantelpiece. Try a faux fire.
How easy is it to change a fireplace surround?
The fire surround is often the easiest place to start, as you don’t need to worry about gas pipes or brickwork. Here, some paint, new accessories or even a whole new surround can go a long way when you need an easy fireplace update.
Can you replace a mantel?
Replacing an older or outdated fireplace mantel can update the look of the entire room. You can expect to complete this project in a few hours, but the pleasure you’ll get from your new mantel will last for years to come. Here’s how to replace your fireplace mantel in a few easy steps.
How much does it cost to install a mantel mount?
Cost to Install a Fireplace Mantel Item details Qty High Unused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks. 0.0 h $0 Totals – Cost To Install Fireplace Mantel 1 EA $824 Average Cost per Mantel $824.37.
What is a floating mantel?
Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.
How much does it cost to replace hearth?
Surround Material Average Cost Brick $100 to $2,000 Wood $100 to $4,000 Metal $950 to $5,700 Stone $1,000 to $10,000.
How far should mantle extend past fireplace?
A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that. Do not guess when sizing the mantel to a room, or the mantel could wind up being too long or too short.
How much does it cost to add a hearth to a fireplace?
Fireplace installation costs between $100 and $5,600 depending on the type. The cost to install a gas fireplace is $2,300 to $4,000, a traditional wood-burning fireplace runs $1,900 to $3,300, and an electric fireplace costs $100 to $2,200. Building a masonry fireplace costs $3,500 to $5,600.
How can I update my fireplace for cheap?
Learning to DIY: How to Update a Fireplace on a Budget Add a touch of paint. Gone are the days of design elements such as bold and bright red fireplaces and natural, oak-colored wall paneling and trim. Turn your brick to stone. Add a mantel. Think — and build — outside the box. Accessorize, accessorize, accessorize.
How do I cover my fireplace walls?
Hiding an Unused Fireplace with Decorative Items Decorative fireplace screen or insert. Firewood. Oversized candles. Candelabra or ornamental candle holder. Potted plants. Books. Large mirror.
How do you remove a mantel from a brick fireplace?
How to Remove a Mantel From a Brick Wall Remove any decorative trim around the outside edges of the mantel. Insert the short end of an I-beam construction pry bar between the back edge of the mantel and a brick wall. Cut through the mounts with a reciprocating saw to release the mantel.
How much does it cost to remodel fireplace?
The cost to remodel a fireplace ranges from $390 to just over $2,000, if done by a professional. A small fireplace remodel might involve repairing or enhancing a fireplace façade, while a larger project would include installing a wood stove or replacing the chimney.
Is it expensive to remove a fireplace?
The cost to remove a fireplace and chimney is $3,000 to $6,000, which includes demolishing the stack and breast, installing structural support, and repairing the walls, floor, and roof. A partial fireplace or chimney demolition costs $500 to $2,500 to remove everything below or above the roof-line.
