Table of Contents
How do you attach a bookshelf to the wall?
Measure on Top of the Bookshelf Measure on Top of the Bookshelf. Place the bookshelf against the wall. Apply Double-Sided Mounting Tape. Apply a piece of double-sided mounting tape to the top of the bookshelf where you made the pencil marks. Connect the Velcro Fastener.
Can you mount a bookshelf on a wall?
Bookcases typically stand on the floor, but if you don’t have the floorspace, you can hang one on the wall. All bookcases are designed with a stretcher or board across the back at the top and bottom. The type that can hang on the wall should also have a backing.
Do bookcases need to be fixed to the wall?
Bookcases do not need to be fixed to the wall unless circumstances call for it due to safety reasons. It is recommended that you fix your bookcase to a wall if you have pets or small children, or if you live in areas that are prone to earthquakes.
How do you secure a shelf to a wall without screws?
You can use plastic ties, steel cables, or Velcro straps to accomplish. Please note, you may have to drill or glue hardware to the back of the furniture. Be aware this method may not be sufficient for holding up furniture to the wall in the event of jostling, a natural disaster, or if the furniture is top-heavy.
How do you secure a freestanding bookcase?
Place silly putty, velcro, or surfboard wax under breakables, to keep them from falling off shelves. Add a thin strip of wood as an additional barrier.
Do I really need to anchor my bookshelf?
Bookcases, dressers, armoires and cabinets are all worthwhile candidates for anchoring — so is any piece of furniture holding a TV. Consider, too, whether a piece of furniture has drawers, shelves or doors.
How do you hang a heavy bookcase on the wall?
5 Tips for Hanging a Perfect Bookshelf Use the right fastener. Don’t hang a bookshelf with any old screws you have laying around. Know what you’re fastening. Bookshelves, kitchen cabinets, and wall cabinets have a piece of wood that you’re supposed to fasten through. No stud, no problem. Use a level. Get on the good footing.
Will my bookshelf fall over?
Furniture will sometimes tip over because it is top-heavy. Try to keep heavier items on the lower half of your bookshelf to help stabilize the bookshelf at the bottom.
Do I have to attach Billy bookcase to wall?
The Billy Bookcase is not specifically designed to be wall-mounted. Consequently, the only standard wall connection with the Billy Bookcase is two small brackets that attach the top of the shelving unit to the wall. That being said, there is no reason why you can’t get creative and wall-mount a Billy Bookcase.
How do you stabilize a bookshelf?
Drill a hole for each foot in the underside of one of the legs and tap in the foot, using a hammer. Right the bookshelf and put it back into position. Raise or lower each foot until the bookcase stops wobbling. Raise the feet by turning them clockwise; lower them by turning them counterclockwise.
Can you hang shelves with no more nails?
To hang up your shelf, you’ll need to get strong adhesive mounting strips designed for pictures or other large objects. Popular adhesive strips include Command picture hanging strips, Scotch reclosable fasteners, and Velcro removable mounting strips. You can buy these products from most craft and office supply stores.
How do you stabilize a Billy bookcase?
To correct and strengthen your BILLY, all you need is a few more nails (consider using double the nails as suggested in the original instructions) and some wood glue. Place the flimsy backing piece back on your bookcase as directed, but use more nails hammered more closely together.
How do you keep a bookshelf from falling down?
Fasten a furniture strap to the wall and the bookcase to keep it from tipping over. The straps cost about $6 at Target and hardware stores. Or, fasten the bookcase to the wall by driving 3-in. screws through the back of the bookcase (at obscure locations) into studs (be sure you hit studs).
How do you attach wood to brick without drilling?
The best way to attach wood to brick without drilling is to use a brick wall hook. These hooks are designed for brick walls, even slightly curved ones. They are removable, adhesive-free, and strong (holds up to 25 lbs). You can install them in seconds and most importantly: no holes to drill.
Can you hang shelves on brick wall?
Traditional screws and fasteners that easily attach to drywall or plaster walls simply won’t work in brick. When attaching shelves to a brick wall, look for specialty fasteners designed for masonry applications.
What anchors do you use for brick?
Self-tapping brick anchors, concrete block or concrete screws are used for fastening items to brick. Concrete screws are most commonly called Tapcon® masonry screws. The heavy-duty masonry screw has the versatility for use in brick, mortar joints, CMU, block or solid concrete.
How do you brace a bookshelf?
Stand a level on the side of the bookcase. If the level shows that the bookcase is leaning to one side, tap on the side of the bookcase with a rubber mallet until the bookcase is level. If it won’t stay in place, tighten the screws slightly and tap on the case until it stays level.
How do you support a leaning bookshelf?
If your bookcase is leaning because it has a leg that is too short, Wobble Wedge® plastic shims are great for fixing this problem too. Soft plastic Wobble Wedge® shims will protect delicate wooden bookshelves from dents while allowing you to level the shelf on hard flooring, like wood or tile.
How do you hang an Ikea bookcase on the wall?
Remove all of the items stored on the top shelf and the shelf directly below the top shelf. Place a right-angle bracket on each end of the top shelf so the bracket rests on the top of the shelf and against the wall. Drill a hole though each mark on the wall. Drive the anchor into the wall with a hammer.
