Table of Contents
How do you build a wall niche?
How to Build a Wall Niche 1 Lay Out Niche. Determine that the wall you’re cutting into is not a load-bearing or exterior wall. 2 Cut Deeply Into Wall Studs. 3 Finish Cut with a Reciprocating Saw. 4 Rip-Cut Frame Boards to Width. 5 Assemble Niche Box. 6 Trim Out Niche. 7 Fasten Niche Box.
How thick does a wall need to be for a niche?
The typical depth of a shower niche is 3.5 inches, the width of a wood stud. In a high rise building, the steel studs may be 2.5 inches deep and this should be considered. This is still wide enough for most bottles. Niches should not be against outside walls if possible in cold weather climates.
How do you make a plaster niche?
Steps 1Find the stud openings in the wall. 2Cut to locate the stud. 3Measure the height and width of the niche. 4Cut out the plaster. 5Install the niche. 6Apply the multi-purpose joint compound. 7Apply the second coat of the joint compound. 8Scrape and sand back the compound.
What are wall niches?
A wall niche is basically a decorative box nested inside a wall of your home. People love them because they’re fully customizable, and they offer a creative way to squeeze in some extra storage out of a blank wall. But not all niches have to be functional, and in fact many are purely decorative.
How tall should niches be?
Positioning your niche at chest to eye-level is a good standard. This translates to a height of about 48 to 60 inches. Ideally, you’ll want to position your niche to fit between the studs which are usually located 16 inches apart. But many contractors can help you with planning the space for a more custom look.
How much slope does a shower niche need?
The proper slope is 1/4 inch per foot so about 1/8 total for a niche.
Where should a shower niche be placed?
For this reason, the wall opposite the shower head is the most popular place for shower niches. Regarding shower niche height – if it’s a regular stand up shower, a placement height above the waist (approximately 3 feet from the shower pan/base) would be most convenient for reach.
What do you put in a niche?
Make Wall Niches Stand Out Paint, tile, and moulding. Add in a statement piece. Highlight the space with art. Turn Your Wall Niche Into a Functional Area. Add a Decorative Sculptural Element. Fake Built Ins. Fill in the Wall Niche with Furniture.
How do you light a niche on a wall?
Let There Be Light: illuminating your wall niche. If your wall niche is deep enough, place a low-voltage bulb in the top of the wall niche to have the light come straight from the top. If you have a smaller wall niche, then you could always have a light source mounted on the ceiling and aiming at the wall niche.
What is niche in interior design?
An interior design niche is an area of specialty. It’s the thing you’re known for and what you do best. It sets you apart from the competition. Some designers naturally fall into a niche by following their interests or the needs of the market. Others have to consciously decide to focus on a certain niche.
What is the size of the niche?
Assuming that you are considering installing a prefab tile ready foam board shower niche, the most popular standard shower niche size is 12″ wide x 28″ high x 3-1/2″ deep. This is based on sales volume of the biggest brand of prefab foam shower niches*. The second most popular size is their 12″ x 12″ niche.
How big is a niche?
The ideal height of a shower niche is at chest to eye level when standing. However, that’s strictly related to the height of each individual person. On average that usually means a height of 48 to 60 inches (120-150 cm).
How high is a niche?
Realistically, most people will want a shower niche to be between 36 to 60 inches (91 to 152cm) from the floor, which makes it a comfortable height to reach for a bottle of shampoo or a bar of soap.
Does a shower niche need a lintel?
Do I need a lintel above my shower niche? Yes. A lintel is always required above the shower niche, ven if you have solid brick walls.
Should a shower niche be slanted?
Well yes the shower shelves should be slightly sloped to let soapy water drain away. And if left for any length of time it might get moldy. But if it’s too late, not a big deal. Just kind of soak of residue water and let it dry.
Can I put a shower niche on an exterior wall?
Generally frowned upon, installing a shower niche in an exterior wall is still possible.
Should you tile shower niche first?
This ensures any splashing or accidental spraying of water on the wall or shower door does not result in any seepage and water damage behind the tiles. If the niche needs to be tiled, then it has to be done tile by tile.
How do you waterproof a shower niche?
Waterproof Shower Niche To waterproof a tiled niche, apply waterproof backerboard to the inside surfaces of the niche. Next, apply waterproof membrane, bedding it in unmodified thinset. With the waterproofing complete, install the tile starting with the bottom of the niche, which should have a slight pitch for drainage.
How long does it take to install a wall niche?
Most wall niches ship within 7 to 10 business days (in most cases sooner). Your wall niche will come with simple instructions making installation a breeze.
How big can an opening be in a load bearing wall?
Any opening that’s 6 feet or less can have just one 2×4 under the beam. This creates a bearing point 1.5 inches wide. Any opening wider than 6 feet should have a minimum of two 2x4s under each end of the beam. CLICK HERE to get FREE & FAST BIDS from local bearing wall carpenters.
