Table of Contents
Can you put any light fixture in a bathroom?
There are safety regulations for installing electric light fittings near sources of water, but as long as you follow some simple guidelines it’s perfectly fine to use ordinary light fittings in a bathroom. But outside those zones then any standard lights are fine to use.
Does a bathroom light fixture need a junction box?
If you’re wondering how you install a light fixture without an electrical box, the short answer is that you don’t. You can’t install a light fixture without a junction box, but the fact that there’s no box at the spot where you want to install the light doesn’t mean you can’t install the light.
Do you need special light fixtures for bathrooms?
While damp-rated lights are recommended in some parts of your bathroom, they’re not necessary for dry spots. In short, unless you’re wiring fixtures in close proximity to your shower, you can use dry-rated lights for most bathroom locations.
Do bathroom lights need to be waterproof?
Here is a quick guide to what IP rating is required for bathroom lights and their zones: Zone 0 – this refers to lights that will be fully submerged in water, such as inside a bath or wetroom floor. You will need IP67 for these lights.
What is the purpose of a junction box?
A junction box is an enclosure that protects a connection (the junction) of two or more wires carrying electrical current. This level of protection is needed to prevent fires and to maintain solid, reliable connections that stay tight over many years.
What kind of box do you use for a vanity light?
Heath described the best style of electrical box for various uses. In general, he recommends plastic boxes for switches and receptacles and metal boxes for light fixtures. Metal boxes are required when the existing wiring in the home is metal clad cable and must be bonded to the ground wire.
Can you use an outlet box for a light fixture?
Octagon or circular boxes are used to hang a light fixture, square boxes are most often used as junction boxes, and rectangular boxes hold switches and receptacles. A covered electrical box in the ceiling or a ceiling receptacle box will require an inspection to ensure that you can use it to install a light fixture.
How do you tap an existing wall switch?
Related Articles Locate the circuit breaker that controls the switch and turn it off. Pull off the switch cover plate by removing the two screws with a screwdriver. Unscrew the two screws that hold the switch in the box, and pull the switch and the wiring out of the box as far as the wiring will allow.
How can I light a room without a ceiling fixture?
Explore these ways to light a room without ceiling lights Floor lamps. In a dark room, floor lamps can bring the night to life. Plug-in wall sconces. Plug-in ceiling pendants. LED strips. String lights. Table lamps. Portable lights.
How big should a light fixture be over a bathroom vanity?
Choosing a fixture that is roughly three quarters the width of your vanity is a good rule of thumb if this is the style that speaks to you. If your mirror is particularly wide, or you’re looking for double sink vanity lighting, consider mounting two smaller fixtures centered over each sink instead.
How do I choose a bathroom light fixture?
7 Must-Read Tips On Choosing Bathroom Lighting Consider Side-Mounted Sconces. Side-mounted sconces, like this one, are one of the best lighting options for a bathroom. Plan for Layers of Light. Use Pendants as an Alternative. Stick to Similar Finishes. Remember the Tub Area. Choose Brass or Chrome for Versatility.
Can Wall lights be used as ceiling lights?
Make the most of a small or narrow space with wall sconces. Such wall-light fixtures use low-wattage bulbs to reduce glare while providing plenty of light. To install a wall-mounted light, you’ll use a ceiling box and wire just as you would for a ceiling light.
Where should lights be placed in bathroom?
It should be placed 75 to 80 inches above the floor and, like all vanity lighting, contain at least 150 watts — ideally spread over a fixture that’s at least 24 inches long so that the light will wash evenly over the hair and face.
Can you put a light above a shower?
While it may be tempting to place a decorative fixture above a shower, it’s not simply a matter of just picking out any ceiling light you like. A ceiling light that goes directly over a shower must be rated for damp or moist areas, and certain types of ceiling light are generally not suited for over-shower placement.
How many lights should be in a bathroom?
In a standard medium sized bathroom, there should be at least three or four vanity lights above the mirror, placed 75 to 80” from the floor and wall sconces on both sides of the mirror, which are placed 66” from the floor, so that the lighting gets evenly spread out in all directions.
Where should a junction box be placed?
Junction boxes are often located on walls near compressors, pumps or large pieces of equipment. In addition, junction boxes are often used on the roof of commercial buildings to provide access to circuits associated with air conditioning units and ventilation fans.
What is the easiest method of mounting electrical boxes?
Mounting new electrical boxes is a simple process, but the job does require careful planning. Metal electrical box utilizes cable clamps to secure nonmetallic cable. Nail-on plastic electrical boxes are affordable and easy to use. Nail-on electrical wall box is quick and fast to nail in place.
