Table of Contents
8.2.2 Coagulants Chemicals used as coagulants in drinking-water treatment include aluminium and iron salts, such as aluminium sulfate, polyaluminium chloride or ferric sulfate.
What two chemicals are commonly used as water coagulants?
Aluminum sulfate (alum) is the most common coagulant used for water purification. Other chemicals, such as ferric sulfate or sodium aluminate, may also be used.
What is the most commonly used coagulant in water treatment?
Aluminum and iron salts are the most commonly used inorganic coagulants in the wastewater treatment settings. These include based aluminum metals (aluminum chloride, aluminum sulfate, sodium aluminate) and iron based metals (ferrous sulfate, ferric sulfate, ferric chloride) [13, 17, 18].
Is alum a coagulant?
Alum is one of the most widely used coagulants in the water treatment industry (Benschoten and Edzwald 1990). For water and wastewater treatment, the coagulants used more frequently are the inorganic salts of aluminum.
What are common flocculants?
Aluminum sulfate or alum (Al2(SO4)3), ferric chloride (FeCl3) and ferric sulfate (Fe(SO4)3) are the most widely used flocculants [1, 70]. These flocculants have a long history of use in removing colloidal particles from water and wastewater [15, 17].
Is calcium chloride a coagulant?
Calcium Chloride Liquid is a highly versatile coagulant commonly used as both a dust suppression agent and an effective chemical for breaking emulsions and destabilizing suspensions in a wide variety of waste stream sources.
Which are two chemicals used to purify water?
Chlorine and ozone are two chemicals used to purify water.
What is the most used coagulant?
Iron and aluminium salts are the most widely used coagulants but salts of other metals such as titanium and zirconium have been found to be highly effective as well.
What is a jar test?
A laboratory procedure that simulates coagulation/flocculation with differing chemical doses. The purpose of the procedure is to estimate the minimum coagulant dose required to achieve certain water quality goals.
How much coagulant is added?
Typical coagulant dosage ranges from 0.5 to 20 ppm. Inorganic coagulants generally require a higher dose than polymeric coagulants. The best technique for determining the proper dosage of coagulant is to feed the product in-line and measure the SDI in the filter effluent as a function of coagulation feed rate.
Which chemical is used for cleaning water?
The most common disinfection method involves some form of chlorine or its compounds such as chloramine or chlorine dioxide. Chlorine is a strong oxidant that rapidly kills many harmful micro-organisms. Because chlorine is a toxic gas, there is a danger of a release associated with its use.
What does coagulant mean?
Coagulants are a substance which cause particles in a liquid to curdle and clot together. Coagulation treatment chemicals are used in effluent water treatment processes for solids removal, water clarification, lime softening, sludge thickening, and solids dewatering.
What is the pH of alum?
Alum is most commonly delivered as a liquid concentration, having a solids level of 8.3% as Al2O3 or about 50% as hydrate. Alum solutions are acidic. For instance, a 1% solution has a pH of around 3. Ionic species present in alum solutions are highly dependent on the degree of reaction with hydroxyl ions.
What is the use of coagulant?
In water treatment, coagulants are used to remove a wide variety of hazardous materials from water, ranging from organic matter and pathogens, to inorganics and toxic materials, like arsenic, chemical phosphorous and fluoride.
What is the difference between coagulant and flocculant?
Depending on the charge and chemical composition of your wastewater, flocculants can either be used on their own or in combination with coagulants. Flocculants differ from coagulants in that they are often polymers, whereas coagulants are typically salts.
Why does pH affect coagulation?
Since pH values affect the surface charges and forms of the coagulants and impurities to be removed, controlling the level of pH would significantly improve the coagulation process. Therefore, not only coagulant dosage, but also pH value should be optimized to maximize the removal of impurities present in raw water.
Which gas is used in purification of drinking water?
Disinfection usually involves a form of chlorine, especially chloramines or chlorine dioxide. Chlorine is a toxic gas, resulting in some danger from release associated with its use.
Is FeCl3 a coagulant?
Ferric chloride (FeCl3) is the most common iron salt used to achieve coagulation. Its reactions in the coagulation process are similar to those of alum, but its relative solubility and pH range differ significantly from those of alum. Both alum and ferric chloride can be used to generate inorganic polymeric coagulants.
What are the side effects of alum?
Side effects of Alum The excessive amount of alum intake may cause breathing difficulty, facial puffiness, pricking sensation & small ulcers on the skin, chest/throat tightness, and burns rarely seen in some cases.
Is Lime a coagulant?
Lime (Ca(OH)2 or CaO): Lime, or calcium hydroxide, is predominantly used to adjust pH, but as a softener, it can also be used as a coagulant aid. The lime bonds with the other particles and increases the size/weight of the flocs which then increases the speed with which they settle out of the water.
Which chemical is used to clean the water tank?
The most common way of disinfecting a water tank is by chlorination. Chlorine is delivered in a variety of ways but the most common is high-strength calcium hypochlorite (HSCH), which, when mixed with water, liberates 60 to 80% of its volume as chlorine.
Which gas is released when alum is added to water?
Explanation: Carbon dioxide gas is released when alum is added to water, which is corrosive to metals.
Why alum is used as coagulant?
When alum is added to water, it reacts with the water and results in positively charged ions. Coagulation removes colloids and suspended solids from the water. These particles have a negative charge, so the positively charged coagulant chemicals neutralize them during coagulation.
Which chemicals are used for coagulation?
Traditional chemical coagulation uses aluminum and iron coagulants. The most common aluminum coagulants are aluminum sulfate, aluminum chloride, and sodium aluminate. Iron coagulants include ferric sulfate, ferrous sulfate, ferric chloride, and ferric chloride sulfate [4].
What is coagulant give at least two examples of coagulant?
Examples of inorganic coagulants are as below:
- Aluminum Sulfate (Alum) – One of the most commonly used water treatment chemicals in the world.
- Aluminum Chloride – A second choice to Alum as it is more expensive, hazardous and corrosive.
- Polyaluminum Chloride (PAC) & Aluminum Chlorohydrate (ACH)