Table of Contents
Do you need an electrician to install recessed lighting?
Yes, you need (sic) to hire a licensed electrican to install recessed lights in a ceiling. Yes, a person with good knowledge and experience in electrical work is able to preform the work.
Is installing recessed lighting easy?
Recessed lighting is easiest to install during new construction but can be retrofitted into existing ceilings. Because recessed lighting is installed in the ceiling, it’s simplest to put in before ceiling material goes up—during new construction or a major renovation.
How far apart should recessed lights be placed in a kitchen?
The common rule is that 4-inch fixtures should generally be placed at least 4 feet apart and 6-inch fixtures about 6 feet apart. Center recessed lighting fixtures in front of the objects you wish to light—a painting, bookshelf, or drapery panels, for example—and about 12 to 18 inches in front of that object.
How do I know where to put recessed lighting?
A good general rule for placement is to divide the height of the ceiling by two. The result is the amount of space to leave between each light. For example, recessed lighting spacing for an 8-foot-high ceiling would be 4 feet between each light. This will provide good spacing for general room lighting.
How much would an electrician charge to install a ceiling light?
Installing ceiling lights typically requires an hour or two per fixture, regardless of the fixture type. The installation cost therefore depends on the electrician’s hourly rate, resulting in a total installation cost between $90 and $230.
Is it OK to install a light fixture without a ground wire?
Yes, if you have a metal light fixture your fixture needs to be grounded. The ground wire exits your junction box, but it is not attached to your junction box.
Can I install a light fixture without a junction box?
You can’t install a light fixture without a junction box, but the fact that there’s no box at the spot where you want to install the light doesn’t mean you can’t install the light. It anchors to the back of the drywall and can support a fixture that weighs as much as 10 pounds.
Is recessed lighting outdated?
The one reason why recessed lighting is timeless because they offer the flexibility to change the finishes later. You have a can in your ceiling that stays forever. However, the finish may become outdated and can be purchased in different colors and styles to suit your needs. You can change them as often as you like.
Why is recessed lighting bad?
Used properly, recessed lights are sleek, unobtrusive fixtures that can be good problem-solvers. Used improperly, they can waste electricity, provide poor lighting and cause your heating and cooling bills to go up. Kitchens are common places where recessed lighting fixtures are used.
How much does it cost to install recessed lighting in kitchen?
Recessed Lighting Cost Expect to pay between $100 to $480 per fixture, or $360 on average, when having recessed lighting installed by a pro. At the average price, the project runs about $2,160 for six fixtures. The total varies depending on the type of housing, trim, and bulbs you select.
Do recessed lights add value to home?
Does recessed lighting add home value? Recessed lighting can absolutely add home value of you take the time to place them correctly and use the right light temperature for the room. There are also ways to make recessed lighting more energy efficient which is not a bad additional benefit.
What is the difference between can lights and recessed lights?
Recessed lights, also known as can lights, are described as metal light housings installed in the ceiling for a sleek look that gives you back your ceiling.
How many can lights can be on one light switch?
There is no limit to the number of lights on a circuit. The load of the fixtures is what determines how many lights a circuit can accommodate. A conventional 15A circuit can have up to 1400W of lighting loads connected to it. A 1400 Watts lighting load can accommodate one 1400W fixture or fourteen 100W fixtures.
How long does it take to install recessed lighting?
Installing recessed lighting is fairly simple and should only take between 2-4 hours, depending on how many lighting fixtures you need.
Can you have too many recessed lights?
It often seems that installing recessed lights is a cure all, but they cannot properly wash light upon walls and all dark corners, which would bounce reflective light into the room. In fact, using too many recessed light may leave areas of your room dark and may even cost you more on your electric bill.
How far should recessed lights be from upper cabinets?
How far should recessed lights be from the kitchen cabinets? If you have upper cabinets, another good rule of thumb is to center the lights with the edge of your countertops. In most homes, that means that lights will be roughly 25 inches from the wall.
What size can light for kitchen?
Recessed Lighting Sizes 4-inch and 5-inch fixtures are great in kitchens for providing overhead countertop lighting. 6-inch fixtures are most common for general lighting purposes. 7- to 9-inch fixtures will create a wider wash of light.
How far from a wall should recessed lights be?
Keep your fixtures between 1.5 and 3 feet away from the wall. Space fixtures equidistant from each other. Place adjustable trim away from the wall.
How many downlights do I need in my kitchen?
If you’re looking for the short answer to this, you can install 1 downlight per square metre, leaving 1 metre spacing’s between each downlight and a distance of 1/2 a metre from the walls. This would generally get you the correct, bright and even lighting results.
Are LED lights good for kitchen?
LED lights for kitchens need to be chosen with care to ensure that the worktops beneath the cabinets in kitchens are well lit. For a nice and bright experience, LED tapes with closely spaced LEDs are a good choice. This will ensure that the area beneath the cabinet is lit properly.
