Table of Contents
SPACING FENCE POSTS As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer’s instructions for spacing, which typically ranges from 4-10′ apart—spacing should not exceed 10′ on-center.
How do you space a chain link fence post?
Chain link fence posts are typically spaced a maximum of ten feet apart. For aesthetic reasons, space posts evenly, but do NOT exceed ten feet between posts. If you plan on installing privacy slats or another type of material that will increase wind load, consider using 8′ or 6′ post spacing.
How deep should chain link posts be?
Dig the line post holes – 6 inches diameter and 18 to 24 inches deep with sloping sides (bottom wider than top). The height of line posts, above level ground equals the height of the fabric minus 2 inches. Repeat the terminal post installation steps for each line post.
How far does chain link fence stretch?
Fence fabric should be stretched from the terminal post already attached to the terminal post at the other end of the line – or – at stretches less than two hundred feet.
Do chain link fence posts need to be cemented?
You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.
How many bags of cement do I need for a fence post?
Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.
Should chain link fence touch the ground?
Generally, it is not recommended for a chain-link fence to touch the ground. Ground contact makes the bottom of the fence more vulnerable to corrosion. It can also make yard maintenance more difficult. The fence touching the ground can prevent rodents and other small animals from getting inside for garden areas.
Can you use T posts for chain link fence?
Chain link fencing can be installed with T-posts. The chain link goes over them and is attached to the posts. Chain link can also be installed with T-posts. These posts are typically used to install smaller chicken wire and garden fencing, but can be used to install chain link.
How do you secure the bottom of a chain link fence?
The simplest way to reinforce your chain link fence at the bottom is by using tent stakes. Tent stakes can be bought at any hardware store, and they are very cheap. If you don’t want to do any kind of installation or you’re just not the DIY person, then using tent stakes is a simple and straightforward solution.
Can you install a chain link fence without a top rail?
When we install a chain link fence without a top rail, we put three terminal posts on corners and two on ends set 10′ apart. We then add a rail that’s just a bit smaller than the posts to the center between the two posts making an “H” shape.
What is the standard width of a chain link fence gate?
The most common size is 4′ inches wide and can range from 3′- 6′ wide. This gate is perfect for those looking to purchase the most simple and affordable fencing option to accommodate foot traffic.
Does chain link fence need tension wire?
Chain Link Tension Wire Installation. Tension wire is an important part of chain link fencing. It secures the bottom and top of your chain link fence to ensure the chain links remain tight to the posts and rails.
How much does it cost to have chain link fence installed?
Chain-link fence installation costs between $15 and $25 per linear foot, with most ranging from $2,250 to $3,750 on average. Chain-link fencing is available in a range of heights from 3 to 12 feet, and come as either galvanized steel or black vinyl coated galvanized steel.
How do I make my chain link fence look pretty?
Slide privacy slats into the links of the fence. Install privacy slats, into the mesh of the chain link fencing, to create privacy and add color. Cover the chain link fence with climbing vines. Painting chain link renews the look. Rolled bamboo creates a serene wooded atmosphere.
Is 2 feet deep enough for fence posts?
2 feet is the minimum depth that you should dig your fence post holes for. To dig the holes one-third to one-half of the post’s aboveground height, is a general formula. The deeper you dig the holes, the more stability your fence has.
Can you build a fence without digging holes?
If you need a temporary fence or a border that you can move as needed, a quick way is to use concrete blocks. Attach a bracket to a concrete block that is heavy enough to hold the wood or other material you plan to use to build the fence. The posts can be mounted to the brackets and the fence finished from there.
How deep should a metal fence post be?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
What is the best concrete mix for fence posts?
In terms of the ratio to use for a concreting fence posts, the best mix is a mix of 1:2:4 (1 cement, 2 sand, 4 aggregate). Concrete is always best mixed using a cement mixer to ensure it’s even, but if you only need to mix a little, hand mixing is ok (see mixing concrete project above for tips on how to do this).
How deep should an 8ft fence post be?
Keep the height of your fence in mind when digging your post holes. As a general rule of thumb, you’ll need to place at least 1/3 the height of the post in the ground. For example, a 6-foot tall fence will need at least 2 feet of post in the ground.
