Table of Contents
Drywall Alternatives
- Wood Planks. Wood planks are an age-old drywall alternative that has certainly stood the test of time well.
- Veneer Plaster. Veneer plaster might be the alternative that comes closest to traditional drywall.
- Lath & Plaster.
- Plywood and Sheet Wood.
- Texture Wall Panels.
- Brick & Masonry.
- Exposed Concrete Block.
- Cement Board.
What is the cheapest wall covering?
What Is The Cheapest Interior Wall Material? Drywall is a pretty cheap option as far as interior wall materials go. A sheet of drywall can cost anywhere from $9 to $15, depending on the size and the installation per sq.
What can I use instead of drywall for walls?
- Wood Planks.
- Plastic Panels.
- Plywood.
- Veneer Plaster.
- Pegboard.
- Lath and Plaster.
- Wahoo Walls.
- Textured Wall Panels.
Is OSB cheaper than drywall?
what should I cover my walls with? The two competing materials at this point are OSB and Drywall. The biggest reason is cost – 1/2″ drywall sheets are about the same price as 7/16 OSB (with 15/32″ OSB not far either).
Is there anything cheaper than drywall?
Sheet Wood Sheet wood can be found in a variety of materials, like a medium-density fiberboard, oriented strand board, and plywood. It’s not only some of the cheapest products that can be used as an alternative to drywall, but it’s easy to install.
What can you use to cover walls?
Here are a few suggestions for how to decorate a wall, without using a paintbrush.
- Temporary wallpaper.
- Tile decals.
- Wall decals.
- Fabric.
- Curtains.
- Original works.
- Photographs.
- Art.
Do you drywall ceiling or walls first?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft. level. Irregularities less than 1/8 in.
Is it OK to use plywood instead of drywall?
Plywood is a viable alternative to drywall for walls and ceilings. If you are planning on redoing your walls or ceilings, the typical materials you’ll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.
How much does it cost to shiplap a whole house?
Shiplap Costs Shiplap wood prices range between $2.50 and $7.00 per square foot for real boards. On average, shiplap interior installation costs $1,000, with most homeowners spending between $500 and $1,500 for one room. Installing exterior shiplap costs $4,000, with most homeowners spending between $2,800 and $7,500.
What can I put on my ceiling instead of drywall?
If you are planning on redoing your walls or ceilings, the typical materials you’ll use include Sheetrock or finished plywood. Each has its benefits as a building material and in some cases, finished plywood is the better alternative.
Is plywood cheaper than drywall?
Drywall is cheaper than plywood – Most wood materials are expensive. Fixing drywall is also a lot cheaper and less time consuming than plywood. Drywall is slightly less durable than plywood, but that is reflected in the cost of the material as well.
What insulates better drywall or plywood?
Drywall offers superior fire resistance compared to plywood, making it the safer wall finish in most applications. This makes it a useful insulating material for flooring, ceilings, roofing, and wall cladding. Insulation offered by plywood can greatly reduce heating and cooling costs.
Is wall paneling cheaper than drywall?
Because of the greater attention needed for cutting and trimming wood, paneling may take more time and cost more than installing drywall. Also, paneling doesn’t work as a sound barrier the way drywall does. Thus, in a workshop, installing wood paneling can produce a noisy, even irritating, atmosphere.
How do you stick things to the wall without damaging paint?
Packing, double-stick and masking tapes, as well as sticky putty, can all be used to hang lightweight frames, wrapping paper, wallpaper and fabric to the walls without risking the paint pulling up.
Why is it called shiplap?
Shiplap likely gets its name from a style of shiplap that was once used to make ships. The same overlapping joint that makes true shiplap tight and weatherproof in a house made for a water-tight ship, too.
What is the latest trend in ceiling finishes?
One of the recent trends for ceilings is an ultra-glossy, reflective finish that shines. A glossy surface tricks the eye so the room feels larger, especially with lighter colors and furniture in place. However, the surface needs to be polished smooth so no bumps show if using paint.
Should I replace old drywall?
This damage can be caused by settling, water damage or rot. It can also simply indicate ageing materials. Ideally, when this sort of damage takes place, older and substitute forms of drywall should be replaced with something more dependable. In the case of basement walls, a mold resistant drywall would be necessary.
What is the cheapest way to do a ceiling?
Easy, Budget-Friendly Ceiling Ideas
- Paint. It’s a great way to change the perception of your space.
- Tin Tiles. Hide damage and uneven surfaces with tin ceiling tiles that introduce a vintage vibe.
- Moldings and More. Adding crown molding and other wood trim pieces to a plain ceiling creates dimension and architectural interest.
- Tiles or Planks.
Which is more soundproof drywall or plywood?
For most applications, drywall is going to be a better soundproofing material than plywood. This is due to the larger mass of the drywall and the fact that sound travels very fast through wood.
How do you cover rough interior walls?
Drywall joint compound is often the best way to cover rough texture and leave a flat, blank canvas on your wall. Wash the walls with degreasing cleaner, then sand them lightly with coarse-grit sandpaper, which helps the joint compound hold.
Is shiplap going out of style?
Shiplap is falling out of fashion. Street added that tile, plaster, rattan, or living walls of plants are becoming more popular this year, instead.
Is shiplap cheaper than drywall?
When comparing the cost of shiplap vs sheetrock, you have to consider the materials used. Shiplap will almost always be more expensive than drywall depending on the materials used. In very few cases, these materials may be less expensive than drywall, but this is rather rare.
What are the 3 types of plywood?
We carry four grades of plywood: A, B, C and D. The grade refers to the quality and appearance of the plywood’s face and back veneers. A has the highest quality and is the most expensive, and D is the least expensive. A-grade plywood features a smooth, sanded surface without knots.
Can you put up paneling without drywall?
The issue of placing paneling only over studs of less than 1/4″ does require a drywall. This is due to fire codes. In the event of a fire, paneling will go burn like crazy and the lack of a drywall backer and/or fireblocking is a major issue. SAFETY FIRST!Jan 27, 2003
