Table of Contents
How do I install my own sprinkler system?
Sprinkler System Installation in 10 Steps Step 1: In-Ground Sprinkler Overview. Step 2: Dig the Trenches. Step 3: Make the Water Connection. Step 4: Install the Zone Valves. Step 5: Place the Pipes in the Trenches. Step 6: Connect the Pipe at the Valve Box. Step 7: Install the Pop-Up Sprinklers. Step 8: Roll Out the Irrigation.
How much does it cost to install a sprinkler system?
Sprinkler System Cost Sprinkler system installation costs $2,540 on average, or typically between $1,706 and $3,525. The size of your yard and the quality of the materials make the biggest difference in price, with larger sprinkler irrigation systems costing nearly $10,000 per acre.
Can I install an irrigation system myself?
Many homeowners choose to hire a contractor to install a sprinkler system, as constructing a DIY sprinkler system can be a challenging project for someone to complete on their own. However, with the right supplies and a little know-how, you can construct your own sprinkler system and save some money on labor costs.
What do I need to know before installing a sprinkler system?
5 Things to Know Before Installing an Irrigation System Different Types of Sprinkler Heads. There are a wide range of sprinkler heads that are used in irrigation systems. You May Need a Building Permit. Different Types of Irrigation Systems. Cost of an Irrigation System. Excavating Your Yard.
How many sprinkler heads can you put on one line?
At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.
How deep do sprinkler lines need to be?
Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area’s freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.
Does sprinkler system add value to home?
If you are wondering whether a sprinkler system can add value to your home, the answer is yes, absolutely! Adding a sprinkler system is an investment that can add upwards $3,000 of value to your home. It adds curb appeal, convenience, and water efficiency features to your home for the market.
Are sprinkler systems worth it?
Benefits of getting a sprinkler system Sprinkler systems make lawn and yard maintenance easy and convenient. Without one, you’ll need to manually water your grass to keep it from drying out. A sprinkler system could also add value to your home and make it easier to sell, especially if you have a larger lot.
How often should grass be watered?
You should water your lawn once or twice a week, giving your grass 1 to 1.5 inches of water each time. The precise number of minutes for each watering will vary from lawn to lawn, depending on factors like the size of your lawn, the type of sprinkler you have, and its settings.
How many sprinkler heads do I need?
As a general rule, HomeTips experts recommend placing the sprinkler heads, so their spray doesn’t overlap. The optimum distance is for one sprinkler head’s throw (how far the water from the sprinkler will travel) to touch the next sprinkler head, or “head-to-head” coverage.
Where are PVC sprinkler lines?
PVC, or polyvinyl chloride, can be tricky to find because there is little or no metal in the pipe system, rendering a metal detector useless. Today, the best tool for the job is ground penetrating radar (GPR) as it accurately maps metal and PVC pipes.
How do I stop my sprinkler lines from digging?
How to Avoid Digging Up a Sprinkler System Look at the design map given to you by your installation company. Locate where a line should be at the edge of the map that crosses the area where you will be working. Mark the area with a flag. Dig down in the area marked, using a hand trowel.
Does a sprinkler system need electricity?
The controller of the irrigation system uses electricity to turn the valves on and off. A typical residential controller uses about 0.5 Kwh a day while a large commercial controller uses about 1.2 Kwh a day.
How long does it take to install a sprinkler system?
How long does it take to install the sprinkler system? Usually 3 – 4 hours depending on the size of the job. 90% of installations are completed in one day.
When should you install a sprinkler system?
Believe it or not, the best time to actually get a sprinkler installation is the fall. There’s no “worst” time to do it, but if you want to not have any worries about your lawn come springtime, it could be beneficial to invest in a new irrigation system right now.
Is it bad to water grass at night?
“A wet lawn at night is the perfect condition for fungus to grow. Along with cutting grass too short, watering at night is about the worst thing you can do to a lawn.” As a general rule, you should water long enough to moisten the soil down to about 6 inches, which is the average depth of a healthy grass-root system.
What pressure do you pump a sprinkler system?
Water pressure is measured in pounds per square inch – also called psi. The average water pressure for most homes and businesses is between 30 psi and 50 psi; most sprinkler systems are designed to use pressures of around 30 psi.
