Table of Contents
Instructions Clean and Sand the Plywood. Put on your dust mask and safety glasses. Fill Indentations With Wood Putty. Plywood often has dents, dings, indentations and even gouges. Clean Up for Painting. Apply Primer. Paint the Floor. Create a Pattern (Optional) Seal the Floor. Let the Paint Cure.
What kind of paint do you use on plywood floors?
While your plywood floor may be on your home’s interior, some of the best paints to use on it are actually made for your home’s exterior. Valspar Porch and Floor Enamel, available at Lowe’s, is an oil-based floor paint that will provide a hard, durable layer of color and protection for your plywood floor.
Can you just paint a plywood floor?
Sand the plywood to whatever smoothness you want. We coated our plywood floor in enamel paint, which comes only in a satin finish. If you want a semi-gloss or glossy look, you can use that type of paint, but you must protect it with a layer of water-based polyurethane.
How can I make my plywood floor look good?
Step 1: Apply the Base Coat. Brush or roll a coat of floor-grade primer to seal the grain and prevent bleed-through, wait for it to dry, then apply a coat of floor enamel. Step 2: Draw Planks. Step 3: Gouge the Lines and Stain the Floor. Step 4: Make a Glaze. Step 5: Paint the Grain. Step 6: Apply Clear Finish.
What paint do you use on subfloor?
Paint your subfloor I used Valspar latex porch and floor paint in ‘Chimney Smoke’. (In case you are wondering latex paint works just fine over oil based primer; you just can’t do oil based paint over water based primer. I chose to use latex paint instead of oil because it is easier to work with and easier to clean.).
Do I need to prime plywood before painting?
Plywood, just like any other wood, requires preparation before painting. The quality of the preparation determines the finished quality of the painted surface. Pour primer into the paint tray until the lower half is full. Roll the roller into the paint and back out to coat the roller with primer.
What is the toughest paint for wood floors?
The best type of paint to use on wood floors is latex or acrylic enamel wood paint. It is eco-friendly, durable, and produces fewer fumes than traditional oil paints. While oil-based paints used to be the top choice, they are banned in many states and are bad for your health.
What do you seal plywood floors with?
One way to preserve plywood flooring is to coat it with layers of clear sealant, which will prevent the plywood from becoming damaged by moisture or wear. Sealant can be painted over a plywood floor using tools that are readily available at any hardware store, such as paint rollers.
How do you prime a plywood floor?
Apply a thin coat of primer with a hand paintbrush all along the edges of the floor by the wall. The coat should be thick enough so it covers the plywood floor surface but not so thick that it creates pools of primer on the floor surface. Roll on a thin coat of primer using a paint roller attached to a broom handle.
What do you paint wood floors with?
For best results, go with a standard oil-based porch and floor paint or oil-based enamel. These aren’t exactly the greenest products on the market, but they’ll stand up to foot traffic better than any other paint. Other types of paints offer a tradeoff – they’ll have less fumes, but they won’t be as durable.
How long do plywood floors last?
Plywood floors, such as T-111 should last for at least 35 years provided it is appropriately finished, Plywood used for smaller spaces such as the kitchen storage or the closet can last virtually forever provided it doesn’t experience much wear and tear.
Can you use Kilz on subfloor?
KILZ Restoration has odor-sealing properties designed to seal out medium to severe odors, including smoke, food and pet odors. Pro tip: KILZ Restoration can also be used on subfloors to block severe pet odors before laying down carpet or laminate.
Can I paint OSB subfloor?
If you want to use OSB as a finish material, you can successfully paint it to make it more attractive and perhaps even improve its utility.
Can epoxy paint be used on plywood?
Although latex and acrylic latex paints are generally preferred for coating plywood, epoxy floor paint can be used, provided the applicator employs the proper preparation and application strategies. Improper techniques will ultimately lead to paint failure.
What happens if you paint plywood without primer?
You may choose to prime your plywood project or not prime it. However, priming is usually recommended. Primers are used to seal the surface of the wood. Unlike paint, they won’t soak into the wood as much, but will dry quicker than they soak in, sealing the grain.
What’s the best paint for plywood?
Top 5 Best Paints For Plywood Rust-Oleum Painter’s Touch Latex Paint. Montage Signature Interior/Exterior Eco-Friendly Paint. Krylon COLORmaxx Brush On Paint. RECOLOR 100% Recycled Interior Latex Paint. PRESTIGE Interior Paint & Primer In One.
How do you seal painted plywood?
Apply a coat of polyurethane sealer over the entire project. Once the paint coats are completely dry, apply the sealer evenly according to the instructions given. Allow to dry at least two days before touching to avoid any blemishes.
Does floor paint need primer?
There are two types of porch and floor paints—oil-based enamel and latex enamel. NOTE: In most cases, you do not need a primer with porch and floor paint products due to the high binder content in the formulation. This is why many of them are considered self-priming.
Do Painted wood floors hold up?
Painting floors can also help hide imperfections. The paint evens out dents and gouges and unifies uneven finishes. It’s certainly not perfect, but painted floors look a lot more ‘finished’ than roughed-up old floors do.
How do you make painted floors durable?
If you plan to add a second coat of paint, lightly sand the first coat before putting the second one down. Tip: The higher the gloss on paint or polyurethane, the more durable it is. If you want the resilience of high gloss without the shine, put on a top coat of satin polyurethane to tone down the gloss.
