Table of Contents
How do you turn a bookshelf into a built in?
Step 1: Screw the bookcases together. Assemble bookcases if needed. Step 2: Cut trim for bookcases. Step 3: Attach the smaller trim. Step 4: Nail the larger trim. Step 5: Touch up and decorate built-ins.
How do you fill a gap between a bookcase and a wall?
Step 1: Scribe and Cut Trim Board. Scribe a board to fit over any irregularities and cut to length. Step 2: Fasten Scribed Board. Fasten the scribed board to the bookcase using screws. Step 3: Fill gaps with Caulk. Fill any gaps between the scribed board and the wall or bookcase with caulk for a clean finish.
How deep is the space between wall studs?
The general spacing for wall studs is 16 inches on center, but they can be 24 inches.
How do you hide holes in bookshelves?
Using the putty knife, apply a small amount of spackling to each section of holes. I worked from top to bottom filling first one row then the next. Use plenty of spackling and push it into the holes as much as you can. You could also use your fingers for this process, but I found a putty knife to be more effective.
How do I reinforce an Ikea bookcase?
To correct and strengthen your BILLY, all you need is a few more nails (consider using double the nails as suggested in the original instructions) and some wood glue. Place the flimsy backing piece back on your bookcase as directed, but use more nails hammered more closely together.
Do Billy bookcase shelves sag?
Why do Billy Bookcase Shelves Sag? Billy bookcases sag because they are made out of particle-board. This material, while cheap, is not as durable as pure wood or other shelf materials.
Do Ikea bookcases need to be fixed to wall?
Though the instruction manuals that come with chests of drawers advise customers to secure their furniture to the wall using a bracket provided, not all do so, leading to tragic consequences. Ikea issued a safety warning, instructing all buyers to attach Malm chests to the wall to avoid other such accidents.
How do you stabilize a bookcase without the back?
If it has a backing, drive 3-inch screws through the backing into the studs behind the bookcase. Use washers with the screws to distribute the load. Alternatively, if there is no backing, affix 1-inch metal corner brackets to the studs and the underside of the top shelf or the sides of the bookcase.
Do you have to attach Billy Bookcase to wall?
The Billy Bookcase is not specifically designed to be wall-mounted. Consequently, the only standard wall connection with the Billy Bookcase is two small brackets that attach the top of the shelving unit to the wall. That being said, there is no reason why you can’t get creative and wall-mount a Billy Bookcase.
What do you do with Billy bookcases?
The options for storage for Billy Bookcase are endless. You can use them to store toys, turn them into dressers, house books, transform a room to appear that it has built-in shelving, and so much more!Jan 13, 2020.
How deep are Billy bookcases?
IKEA Billy Bookcases come in height variations from tall at 93.25” (237 cm) to short at 41.75” (106 cm). Widths range from wide designs at 31.5” (80 cm) to thin designs at 15.75” (40 cm). All bookcases have a depth of 11” (28 cm).
Why do old houses have spaces between the walls?
Because of their big, heavy stature, they required quite a bit of space. Homes used to have niches in walls for this purpose. Today, however, they’re a place to store things like mail or display a plant. If you have an old house with a random toilet in the basement, here’s why.
Do studs have to be 16 on Center?
Why You Should Find Studs They’re always spaced either 16 or 24 inches on-center (measured from center to center) along the wall and run between the floor and ceiling. Drywall or lath (for plaster walls) attaches to the edge of the studs.
What is the space between two studs called?
The cavities between the studs are called bays (or stud bays). A horizontal piece at the bottom of the wall is called the bottom plate. The studs are nailed to this plate, which is nailed to the floor.
How much weight can a 2×4 shelf hold?
A 2×4 can hold up to 40 pounds or 300 pounds when laying on its edge without sagging when laying horizontally. Several factors can lower or increase a 2x4s strength, including wood species, lumber grade, and moisture content.
How do you stack two bookcases?
Place three C-clamps spanning across both bookcases evenly spaced vertically from top to bottom. One side of the clamps will fit in one bookcase, and the other side will fit into the other bookcase. Tighten the clamps securely to bond the two bookcases together.
Do you need to fix bookcase to wall?
Bookcases do not need to be fixed to the wall unless circumstances call for it due to safety reasons. It is recommended that you fix your bookcase to a wall if you have pets or small children, or if you live in areas that are prone to earthquakes.
Can you stack Billy bookcases?
BILLY bookcases are built with a stackable design that allows you to attach new units whenever you need additional storage, just decide on what height suits your space best.
What can I use instead of built ins?
Just take a look at these 5 Ways to Fake Built In Shelving. Bookcase with a Bump-out. Breakfast Nook Bench. Character-Adding Closets. Tall Library Shelving. Mudroom for Less.
