Table of Contents
How deep does a concrete pad need to be?
Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks.
Can I pour my own concrete pad?
When you pour your own concrete slab, you’re giving yourself a design material that is adaptive to many of your outdoor design needs, while saving money that would have been spent on a contractor.
Can you lay concrete on dirt?
Long story short, yes you can pour concrete over dirt.
How many bags of concrete do I need for a 10×10 slab?
Regarding this, “how many bags of concrete do I need for a 10×10 slab?”, at 4 inches thick, generally you will need approximately either 74 bags of 60lb or 56 bags of 80lb premixed concrete for a 10×10 slab, at 5 inches thick slab, either 93 bags of 60lb or 70 bags of 80lb premixed concrete are required, while at 6.
Do you need gravel under concrete?
Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn’t drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.
How much does it cost to pour a 24×24 slab of concrete?
A typical 24×24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
Can you use quikrete for a slab?
Concrete is one of the most economical, versatile and durable building materials available. Build a sidewalk, patio, or floor with QUIKRETE concrete mixes no matter your skill level.
Is it cheaper to pour your own concrete?
Whether you’re pouring concrete countertops or a patio out back, it may be cheaper to pour concrete yourself rather than hiring someone. Whether you’ll save much in doing so depends largely on the amount of concrete needed and the amount of time you have to invest in your concrete project.
Does ground need to be dry to pour concrete?
Civil engineer here. The concrete needs to stay wet in order to cure properly. As noted before, concrete doesn’t dry out to harden, it cures through a chemical reaction that needs water to facilitate the reaction. If the ground is dry, the ground will absorb moisture from the concrete and it won’t cure properly.
Do I need rebar in a small concrete pad?
Rebar is not necessary for every concrete project. Reinforcing concrete with rebar or wire mesh not only makes the concrete strong, but it also significantly curtails the number of cracks that appear in that concrete down the line.
What’s the best base for concrete?
What is the Best Base for a Concrete Slab? Most people build a driveway or a patio so in that case, a good choice would be a mix of coarse and fine aggregate which will create a compactable base. Overall, a mix of crushed stone and stone dust is the best base material for any concrete flatwork.
Is sand a good base for concrete?
Simply put, sand isn’t sturdy enough to work well as a subbase for something like a driveway. It is also difficult to maintain a level sand surface when pouring concrete, and therefore difficult to maintain a uniform thickness of the concrete slab.
How many bags of cement do I need for 12×12?
To determine how many bags of concrete you will need, divide the total cubic yards needed by the yields, at 4 inch thick, for a 12×12 slab you will need 1.76 yards of concrete, so number of 80lb bag of concrete = 1.76 ÷ 0.022 = 80 bags, No. of 60lb bag = 1.76 ÷ 0.017 = 104 bags & No.
What kind of gravel goes under concrete?
More gravel is better, but 3 inches is the minimum amount of gravel you should have with a 4” slab. Use ¾” washed and screened gravel, then compact it to level.
How much does an 80 lb bag of concrete cover?
30 cubic feet, 60 pounds of concrete mix yields . 45 cubic feet and an 80-pound bag yields . 60 cubic feet.
How many bags of concrete do I need for a 10×8 slab?
Regarding this, “how many bags of concrete do I need for a 10×8 slab at 4 inch thick?”, its depend on thickness of slab, at 4 inches thick, generally you will need approximately either 58 bags of 60lb or 45 bags of 80lb (0.98 cubic yards or 26.4 cubic feet or 0.748 m3) of premixed concrete for a 10×8 slab.
What is a cheaper alternative to concrete?
There are a few different types you can find in the home improvement store that can replace concrete cement used for driveways and walkways. These include pea gravel, crushed stone, and quarry process. Cheaper than other surface materials and low-cost to install.
What happens if you don’t put gravel under concrete?
Because concrete is a very porous material, it will absorb any moisture that it contacts. This can cause pooling. Without crushed stone, pooling water will settle under it and erode your slab.
Can you use pea gravel for concrete base?
While pea gravel can be used as a mulch alternative, garden border and other landscaping purposes, it is not the best choice for a patio base.
How much does a 40×60 concrete slab cost?
How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That’s based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.
How big is a yard of concrete 4 inches thick?
One Cubic Yard of Concrete: 4-inches thick – covers 81 square feet. 5-inches thick – covers 65 square feet. 6-inches thick – covers 54 square feet.
How much would a 10×12 concrete slab cost?
Cost of concrete per square foot Slab Size Square Feet Average Cost 10×10 100 $600 10×12 120 $720 10×20 200 $1,200 12×12 144 $864.
