How To Make A Nightstand Taller

How to Make a Nightstand Taller in 7 Steps 1: Get the Right Equipment. 2: Gather and Cut the Materials. 3: Add Legs to Increase the Height. 4: Attach an Extra Top Unit for Height and Functionality. 5: Add a Tall Back Panel. 6: Attach Shelves for Storage and Support. 7: Add the Finishing Touches and Paint. 1: Fit New Legs.

How do you raise the height of a nightstand?

If your nightstand is too low, you can: Add a drawer topper to the nightstand to make it higher. Fit furniture risers to the nightstand. Use another piece of furniture, such as a flat chest, to raise the nightstand. Finally, you could pay a competent carpenter to craft new legs to raise the nightstand.

What height should a nightstand be?

RULE: 24”-27” is the ideal height for a nightstand but just keep the height 5″ higher or lower than the top of your mattress. Nothing worse than reaching over for a glass of water and having to crawl out of bed to try and find it on a super low nightstand.

How do you put legs on a bedside table?

Mark where you want your wooden furniture legs and pre-drill holes. If you don’t have enough work space for the legs, you’ll need to add a small piece of wood to the underside before attaching the legs. Next hammer in your Tee nuts into your pre-drilled holes. Then screw the furniture legs into the Tee nuts.

How do you raise the height of an end table?

You can add lifts, feet, or extensions to your table legs to make the table taller. Wooden extensions can be added to your wood table to add height to the legs. Alternatively, you can replace your table legs entirely to make sure you get the height that you want.

Are nightstands supposed to be taller than the bed?

As a general rule of thumb, the top of your nightstand should be level with the top of your mattress, or about 2-4” taller. It’s much easier for somebody to reach above to grab something when they’re laying on the bed, as opposed to reaching below.

Can nightstands be different heights?

That’s the traditional approach, yes—but as with all design traditions, rules are meant to be broken! So you can definitely have two nightstands of differing sizes, shapes, finishes and even heights.

Should bedside tables be the same height as the bed?

As a general rule of thumb, Tahn says your bedside should be roughly the same height as the top of your mattress, and lamp height approximately the same height as your bedhead. This creates helps the room feel orderly.

How do you add legs to a piece of furniture?

Instructions Remove the old base or legs by unscrewing and prying off glued parts. You may need to use a multi-functional tool to cut off the base. Modify the base for new legs. (optional) Some dressers need extra support. Attach furniture leg plates. Screw in the new legs.

How do you change table legs?

Most table legs should simply unscrew at the base. Just turn the leg counter-clockwise, and it should begin to come loose. If the table is very old, it might take a little muscle to get it loose. Other times, the leg is attached with a series of screws that can be removed with a screwdriver.

How do you add legs to a table?

For small tables with thin legs, try using metal plates called surface plates and screw the legs into them. If you’re going to move the table a lot, install small inserts called T-nuts directly into the tabletop and screw the legs into them.

How do you attach table legs?

Here are 8 ways how you can easily attach table legs: Straight and Angled Metal Plates. Threaded Inserts. Mounting Blocks. Straight and Angled Cleats. Single Angled Cleats. EasyBase™ system – A TableLegs.com exclusive. Direct Attachment. Traditional mortise and tenon joinery.

How do you add height to furniture?

How to Make a Desk Taller – 5 Easy and Affordable Solutions Use Risers. Using furniture risers is the most common method to add extra height to tables and desks. Add Bun Feet. For wooden tables, you can use bun feet to raise the height of the table. Get Wooden Extension.

Can I add feet to my dresser?

Adding feet to a dresser can make a dresser taller, add extra character and even change the style of the dresser. Adding feet to a dresser doesn’t need to be hard, or a long process! This DIY dresser makeover was quick and painless with only a couple of general tools (a hammer and a drill) needed!.

What should be in a nightstand?

5 nightstand must-haves for a more restful night A lamp. Hand lotion, lip balm and any medications you may need during the night will allow you to fix simple issues without making a bleary-eyed trek to the bathroom medicine cabinet in the middle of the night. Small dish or tray. Reading material. A flashlight.

How tall should an end table be?

An end table should be no taller than the height of the arm of the chair(s) they’re serving, and no lower than the height of the seat. The best height is one around 3 inches shorter than the arm. For chairs without arms, aim for a table top that’s no more than 8 inches above the seat height.

What are the dimensions of a nightstand?

Nightstands are usually square and come in pairs: one for each side of the bed. An average nightstand measures around 20″ wide and 20″ deep. The height of the nightstand should be equal — or close to — the height of your bed frame and mattress so that the pieces align properly.

How do you coordinate nightstands?

Your nightstands, dresser or bed can coordinate with the lighting, window treatments, artwork, or rug in the room. For example, if you have a brass chandelier, use brass details in either the nailhead trim of an upholstered bed or in the hardware for nightstands or a dresser.

How do you decorate the top of a nightstand?

Add a set of 2-3 frames with your own art or photography or add artwork that embodies the color palette of the room in a subtle way. Add fresh or faux floral to liven up the look and give it life. If you use art above the nightstand slide the lamp to the left or right of the art piece so you can see all its beauty….

Do nightstands and dressers need to match?

It is not mandatory for nightstands and dressers to match. Instead, the nightstands and dresser in your bedroom space should complement each other and coordinate with the other furniture and decor in the room. These pieces can complement each other through: Style.