Table of Contents
What kind of wood do you use to make shutters?
Cedar is the most common material for construction of exterior shutters because of its resistance to both insects and decay. It is a straight wood that finishes very well and can withstand harsh outdoor conditions well.
How thick should wood shutters be?
Thickness, Width, Height Our default standard thickness is 1 5/16″, but that can be varied from 7/8″ to 2 1/4″ to match existing exterior shutters. The length and height can be specified to the nearest 1/16″ inch.
What kind of wood do you use for board and batten shutters?
Western Red Cedar is the most common material for building exterior board and batten shutters in the industry. Cedar has many of the same qualities as Redwood, yet is less dense, making it easier to sand and finish.
What are the four types of shutters?
Exterior window shutters come in four basic types: paneled, louvered, board and batton (sometimes called BnB) and Bermuda.
How thick are exterior shutters?
Measure Exterior Shutter Depth It is preferable for functional outdoor shutters to fit entirely within the window opening. Measure from the back of the side jamb to the front of the window casing. Premium wood shutters require a void of 1.5 inches, while composite shutters need 1.25 inches and Pine shutters 1 inch.
How wide should board and batten shutters be?
Building Board and Batten Shutters Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window. Each batten will run diagonally across the boards and should be just shy of the width of your shutter.
How wide should board and batten be?
The battens should butt tightly against the top trim board and be flush at the bottom with the wider vertical boards. While the width of the battens is your choice, they should be wide enough to overlap the edges of the larger boards by at least ½ inch on both sides.
Are board and batten shutters popular?
Existing on historical cottages, European homes, and early American colonials for centuries, these classic shutters continue to be a popular choice, especially when the homeowner wants to create a rustic or modern farmhouse feel.
What are exterior shutters made of?
Exterior window shutters come in four basic types: paneled, louvered, board and batton (sometimes called BnB) and Bermuda. They are available in a variety of materials including MDF (medium density fiber), vinyl, synthetic foam, faux wood and wood. Basswood is the most popular wood for shutters.
Should shutters be the same size as the window?
For the most authentic look, we recommend measuring only the window opening not including any frame or trim around it. Typically, the width of your shutters should be half of your total window width. Keep in mind that the shutters should look like if they could close to cover the window.
What type of shutters are best?
Composite wood materials could be made from one wood species or several species combined. Engineered wood shutter material is sturdy making it the best option for plantation shutters. It is also a great alternative to plain wood shutters, thanks to its durability and flexibility.
What are louvers on shutters?
Louvers are the angled slats attached to the vertical stiles that frame the shutter panels. On traditional shutters, the louvers can be opened and closed by moving the center tilt-rod.
What are the two types of shutters?
There are two basic types of shutters: 1) between the lens shutter, and 2) focal plane shutter.
How far should shutters be from window?
In most cases, the height of decorative shutter that is most appropriate is from the top to the bottom of the window trim. If there is a sill at the bottom of the window and you are installing vinyl shutters, it is important to leave a gap of at least 1/4 inch to allow the vinyl material to expand and contract.
Is it OK to put shutters on the back of the house?
Whether it’s high winds or flying debris, functional shutters act as a shield for your windows and help keep everything inside safe. Windows at the back of a home are just as vulnerable to weather damage as those in the front; therefore, shutters can provide the same benefits on both sides.
What size do plantation shutters come in?
Choose from 1 7/8, 2 1/2, 3 1/2 and 4 inches. Larger louver sizes help give your window a more modern, contemporary look. They also preserve a clearer view when you open the louvers to look outside. A smaller louver size helps lend a more traditional design to your window.
What is the difference between shiplap and board and batten?
Shiplap and Board and Batten are two different wooden wall treatments. Shiplap refers to wooden boards of the same width with grooves that help each board fit together tightly, while board and batten refers to boards of different widths installed with space between, usually vertically.
Is there a standard height for board and batten?
It should generally measure either one-third or two-thirds the height of the ceiling. But it should never settle at half the height of a room. Using board and batten can completely alter the face of a home or the style of a room because it adds detail onto an otherwise flat surface.
What is batten spacing?
Typically, batten are spaced anywhere from 12” to 24” apart. I think it looks best to space them as close to 18” as possible, but that’s just a personal preference.
How many boards board and batten shutters?
Depending on the size, you’ll want to use two or three boards to make up the shutter body. For my rather large window openings, I needed 21 inches of shutter per side. This was best made up of three 1″ X 8″’s ripped to a combined dimension of 21 inches. I took off about 1/2″ from each board.
What is board and batten shutters?
Exterior Board & Batten Shutters Spaced or joined board & batten shutters are a charming addition to traditional homes. This style of shutter replicates old-world craftsmanship with its attention to detail and variety of styles to fit different shapes of windows. Standard Three-Board Spaced Shutter.
Can you put shutters on board and batten siding?
Bringing it home might be easier than you think. Swapping in board and batten shutters is a simple way to do it, but you can also completely swap out your home’s exterior for board and batten siding with a little expert help and some patience.
