Table of Contents
You cannot lay resin bound surfacing directly over block paving with no preparation and not expect to some signs of cracking over time.
Is a resin driveway more expensive than block paving?
Overall resin-bound paved driveways are cheaper than block paving. However, resin bound driveways will not have weeds growing in between the gaps, as there aren’t any. They will also not have any displacement issues, so no costs to repair or re-lay.
Can you cover block paving?
Block Magic is a high performance restoration product that not only colours, but also seals and protects block paving. Block Magic should not to be confused with a concrete paint. Once applied, it will soak into the pavers, and unlike a paint, will not peel, flake or chip off.
Are resin driveways better than block paving?
Resin bound minimises weed growth and leaves you with a low maintenance driveway, whereas block paving has many gaps which allow space for weed growth. Resin bound provides homeowners with a wide range of colour options to match your property’s individual style.
What are the disadvantages of a resin driveway?
3 Disadvantages of Resin Driveways Cost. Unlike concrete or block paving, resin bound surfacing isn’t simple to install. Heavy Usage. Resin bound driveways and surfacing aren’t the best choice for areas that regularly endure heavy traffic and usage. Weed and Moss Growth. What are the alternatives to resin bound driveways?.
Do weeds grow through resin driveways?
Resin bound surfacing is completely bound, which means that it is weed resistant. This is because small seeds can fall onto the driveway resulting in the growth of surface weeds. Some climates and weather conditions can also result in the growth of moss and algae on resin bound surfacing.
How much should a resin driveway cost?
It is difficult to quote a cost per square metre for resin driveways as each project has completely unique considerations and specifications. Generally speaking, though, a resin driveway costs from around £40 per square metre upwards depending on the size of the area, existing floor and type of aggregate.
Is it OK to jet wash block paving?
The short answer is yes you can. But there are some conditions. Pressure washing is a good way of keeping your block paving in great condition, but if you do it incorrectly, or too frequently, you can damage your paving and ruin your driveway.
Can you lay a resin driveway on top of concrete?
Resin bound surfacing can be laid on either a concrete surface (non permeable) or on a permeable asphalt surface.
How do I bring my pavers back to life?
Old Pavers-With the use of a wet look sealer you can bring out the original colors in faded pavers. A solvent based sealer will give the faded pavers a wet look which basically darkens the pavers and pops out color bringing old pavers back to life.
Are there any problems with resin driveways?
However, there are a number of problems that can arise during the installation of a resin-bound system (if installed incorrectly), including a poor resin-aggregate ratio, application depth, weather conditions, curing too quickly, poor installation, and lack of attention to protecting the surface.
How good are resin bound driveways?
Its longevity: resin bound paving is a long lasting durable surface. While guarantees vary between 10 – 21 years, when properly installed and maintained, can last for more than 25 years. It requires minimal maintenance: there are no weeds to ‘weed’ or loose stone to sweep.
Do resin driveways sink?
Resin bound material is resin and stone mixed together, and then trowelled onto the prepared base to a depth of around 15mm or more in some cases. You can choose stone in any colour you like, and the result is an attractive finish that should be sink free-even after many years of use.
Do resin driveways add value?
The answer to that question is a resounding yes-especially if you opt for resin.
Is a resin driveway better than tarmac?
Resin driveways provide you with an anti-slip surface as they are installed with a smooth finish and no loose chippings (and are SUDS compliant). Whilst tarmac is a sturdy surface and can withstand strong forces of pressure, over time the bonds can weaken and create loose stones.
What are the pros and cons of resin driveways?
Pros of Resin Driveways Resin Driveways Are Low cost. Resin Driveways Are Quick to install. Resin Driveways Are Easy to maintain. Resin Driveways Have Rare drainage complaints. Resin is admirable. Resin Driveways Are Durable. Resin Driveways Are Flexible. Uses Of Resin Bound Stone.
How soon can you walk on a resin driveway?
Q: How long do I have to wait before I can walk or drive on my Oltco resin bound driveway? A: This varies depending on the traffic. For pedestrian traffic we recommend 16-24 hours. For vehicular traffic and heavy traffic we recommend at least 48 hours to ensure the surface is fully cured.
How thick should a resin driveway be?
Composed of kiln-dried aggregate bound with clear polyurethane resin, resin bound surfacing is typically laid from a minimum thickness of 15mm to 20mm. Resin bound surfacing may be laid on a solid base of concrete, asphalt concrete or hot rolled asphalt.
Can you jet wash a resin bound driveway?
The short answer is yes – you can jet wash a resin surface such as a resin bound driveway or patio. This is because the surface upon which vehicles are parked tends to accumulate oils and dirt more rapidly than patios and other surfaces. When jet washing any resin surface, care must be taken not to damage the area.
Can I lay my own resin driveway?
If you are a DIY enthusiast, experienced tradesman or builder you all have the option to self-install permeable resin paving for your own residential or commercial projects.
Can a resin driveway be laid on a slope?
You’ll be happy to learn that resin bound surfacing is perfectly suitable for sloped driveways, but more than that, it’s one of the best driveway materials on the market to combat the issues that can arise when applying a new surface to a sloped area.
Can resin driveways be laid in the rain?
Weather conditions such as rain, humidity, dew, wet aggregate or any other ground moisture can present a big danger to your Resin Bound system. Moisture and resin react together instantly, producing gas bubbles which will appear as foam or clouding within the resin.
