Table of Contents
Step 1 – Tape off the top and bottom (optional) Step 2 – Spray paint your tumbler. Step 3 – Prepare your turner. Step 4 – Mix and add epoxy resin. Step 5 – Apply glitter. Step 6 – Optional: apply vinyl decal or more glitter. Step 7 – Apply the final coat of epoxy. Step 8 – Clean the tumbler and remove the tape.
What kind of epoxy do you use for glitter tumblers?
How to Mix and Apply Epoxy to a Glitter Tumbler. If you’re wondering what kind of epoxy to use on tumblers, which is a common question from beginners – I used Amazing Clear Cast brand epoxy. It comes with both epoxy part that you will need to mix together. You can also get it as part of a full epoxy tumbler kit.
What do you seal glitter tumblers with?
Seal glitter on the tumbler with a gloss clear spray sealer or brush on mod podge. Allow tumbler to dry. 5.
What kind of liquid is in a glitter tumbler?
If you use too much water, all of the glitter will fall to the bottom. You need about 60% water, 40% glycerin.
Can you use regular glitter with epoxy?
If you want your glitter to be evenly mixed throughout the resin, you need to not use a “heavy” glitter. Instead opt for a fine, micro-glitter like Stampendous micro-glitter or something similar. Many experienced crafters also recommend that you wait before adding glitter to the resin.
Can you use any epoxy for tumblers?
One of the questions most beginners ask is, what kind of epoxy to use on tumblers. One brand that you can use is the Amazing Clear Cast epoxy, you will find it comes in a 2-part clear coating and casting resin. There is also an entire epoxy tumbler kit available in this brand.
What can I use instead of epoxy for tumblers?
Most are using our Brite Tone(BT) as an alternative to Epoxy. BT is a Waterbased product and is very high in solids so it builds quicker than any other Waterbased products. It is very different than epoxy as you have to use several thin layers versus 1 or 2 layers of epoxy.
What is the best way to seal glitter?
Mod podge is considered one of the most effective ways of sealing glitter onto any surface. You must stick glitter onto your project using mod podge. You can also do a second layer to seal the glittered surface. Use mod podge with a gloss finish to achieve a shiny and durable finish.
How many coats of epoxy does a tumbler need?
It does depend on what you’re creating, but the average is 2-3 coats. To properly seal all the layers beneath, we recommend using a topcoat of your resin. For a sparkling finish, you can mix in glitter from our friends at Alumilite to realize your epoxy glitter tumbler vision.
Can you use spray epoxy on glitter tumbler?
To apply the glitter, you need an adhesive. Some folks like Mod Podge, others like spray adhesive. And, of course, you need the epoxy resin to seal your glitter tumblers. This is what will keep your glitter contained and protected on your tumbler!Dec 29, 2018.
How do I make my own glitter tumblers?
Instructions Wash tumbler. Apply tape to top (and bottom – optional). Spray paint the tumbler if needed. Let dry. Apply a layer of mod podge with long even strokes. Dump glitter all over while you are turning the tumbler so the mod podge is all covered. Remove tape. Let dry fully (over night). Time to epoxy.
Why is the glitter clumping in my tumbler?
Pour a dash (count out 1 second) of glycerin into the bottom of the jar. Fill the rest of the jar almost all the way to the top with room temperature water and stir around the contents of the jar. If you notice that the glitter is still clumping, you may have used too much glycerin.
How much glitter do you put in a snow globe tumbler?
Using a funnel add glitter until you have 1/2 to 1″ of glitter in there. Next mix 4 oz of water with 2 oz of clear Elmer’s glue in a fine tip squirt bottle. Carefully squirt about an inches worth into the hole in the bottom of the tumbler.
What is an alternative to epoxy resin?
Hard plaster and concrete are excellent epoxy resin alternatives, and their use is not limited to small surfaces only. Unlike epoxy resin, concrete and plaster can be easily applied to large surfaces as well. Other great alternatives to epoxy resin include slush latex, metal, plastic, and alabaster.
Is Mod Podge the same as epoxy?
6-Mod Podge Super Thick Gloss: As the name says super thick gloss, with this you cannot glue down your projects, its simple purpose is to provide Super Gloss, smooth, epoxy-like finish over your projects. So it gives you a very shiny, clear finish that looks like epoxy.
How do you seal with epoxy?
Sand the project. Remove all dust from the project with tack cloth. Place newspapers or a drop cloth underneath the project. Pour epoxy resin and hardener into a clean coffee can. Apply epoxy using a bristle brush. Check for runs or dry spots as you paint. Allow project to cure for 24 hours in a dust-free room.
How much glitter do you put in epoxy?
????TIP: Though some may disagree, there is actually such a thing as too much glitter! Whenever incorporating any additive, whether it be glitter, a liquid colorant or a powdered pigment, always remember the 6% rule: that is, don’t add more than 6% of the total combined volume of resin and hardener combined.
Can I put resin on top of glitter?
One thing to know though, if you want to add the glitter on top of the resin, it can take away from that uniform glossiness of the top resin layer if you are sprinkling glitter onto a larger area. So you may want to add a clear layer of mixed resin and hardener on top if you decide to add glitter on top of your pour.
How do I stop Glitter from sinking in resin?
To stop it from sinking to the bottom, you can add a ton of glitter so that it’s almost paste/sand like. If you see space in your mix cup with clear resin, that will occur in your mould too, so fill the resin up with lots of glitter.
